Krmf706ebs Parts

The Dispenser Control Board is an OEM part for Whirlpool refrigerators. It is responsible for controlling the various functions of the refrigerator dispenser, such as ice dispensing and water flow. It communicates with other electronic components to ensure accurate dispensing of ice and water, as well as controlling the display and lights associated with the dispenser.

A bad dispenser control board can occur due to electrical malfunctions, damage from power surges, or wear and tear over time. If you notice symptoms such as the dispenser not working, the display not lighting up, or erratic behavior from the dispenser, it may be time to replace this part.

Symptoms of a bad dispenser control board include:

• Dispenser not working
• Display not lighting up
• Erratic behavior from the dispenser

Restore your Whirlpool refrigerator's dispenser by replacing the faulty or damaged dispenser control board with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This factory screw fastens appliance components securely. Replacing a missing, stripped, or rusty screw helps stop rattles, keep panels and brackets aligned, and restore a solid, as-designed fit.

• Secures panels, brackets, and trim to the appliance cabinet or frame
• Helps maintain alignment and reduce vibration or rattling noises
• Replaces damaged, corroded, or missing hardware
• Can resolve loose or shifting components

• Disconnect power and shut off gas/water to the appliance before service.
• Use the correct driver; start threads by hand to avoid cross-threading and do not overtighten.
• Install in the original location and match the OEM fastener type specified in your model's parts diagram.

This solenoid is the electromechanical actuator that opens and closes a valve or latch to control flow or movement inside compatible appliances. Replacing a worn solenoid restores reliable on/off operation and responsive dispensing or cycling. What it does:

• Converts electrical signals into mechanical motion to open or close a valve or latch
• Controls water or ice fill cycles, dispenser flow, or other timed movements in the appliance
• Commonly linked to symptoms like no water/ice dispensing, intermittent operation, or a clicking/no-response during a cycle
• Works with the appliance control to ensure precise on/off control where used

• Disconnect power to the appliance before starting any repair
• If the solenoid controls water, turn off the water supply and relieve pressure before disconnecting lines
• Handle electrical connectors carefully; avoid pulling on wires—disconnect at the plug
• Verify correct part fit and function after installation; manufacturer instructions for detailed service procedures

The Handle is an OEM part for Whirlpool refrigerators. An external component consumers interact with daily, the handle provides access to chilled storage compartments.

Symptoms of a bad handle include:

• Difficulty opening refrigerator doors smoothly
• Loose or detached handle assembly  
• Inability to open refrigerator fully for easy access
• Failure of locking/closing mechanisms

Causes may include normal wear over extended use. Plastic components can weaken from repeated opening/closing of heavily weighted doors.

This quality OEM Whirlpool replacement handle ensures dependable operation for the life of your refrigerator. Sturdy construction and precise fitment guarantee seamless access to food and beverages. This part is also compatible with Maytag, Roper, Amana, Jenn-Air, and select Kenmore models.
 

The Bin is an OEM component for Whirlpool refrigerators. Providing flexible storage and organization, it fits seamlessly onto shelf tracks in the refrigerator and freezer doors. 

Durable plastic construction secures items without spills or shifting even during opening and closing cycles. Airflow vents allow rapid cooling and freezing of stored goods without obstruction.

Causes of damage to bins can include mineral leaching over time weakening plastic or stress cracks from accidental drops when overfilled.  

Symptoms of a bad bin include:

• Warped walls no longer fit runners smoothly   
• Visible cracks or breaks compromising seals  
• Missing vent slots blocking efficient air circulation
• Bins dislodging accidentally from runners on opening

Replace yours today with this genuine Whirlpool bin to restore utility for the leftover organization. Compatible with Kenmore Elite, Maytag, and Jenn-Air French door refrigerators as well.

The Door Switch is an OEM part for Whirlpool-brand French door refrigerators. Located inside refrigerator door frames, it functions to detect the opening and closing of doors.

Causes of a bad door switch failure can include cracks in wiring from repeated door flexing or moisture/debris buildup inside the sensitive contact points over time. 

Symptoms of a bad door switch include:

• Interior lights failing to illuminate on door opening  
• Refrigeration system running constantly 
• Door alarm incorrectly detecting doors as ajar

Replacing with this OEM switch helps optimize efficiency and restores the alerts homeowners rely on. Compatible also with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore French door models.

This door bumper cushions the door against the frame to prevent metal-to-metal contact. Replacing a worn or missing bumper restores smooth, quieter closing and helps protect surfaces from chips, scuffs, and vibration.

• Absorbs impact where the door meets the cabinet/frame
• Reduces slamming noise and vibration during closing
• Helps protect paint, glass, and trim from wear
• Typical symptoms: missing/cracked bumper, loud clunk when closing, marks on frame, rattling

• Disconnect power and, if applicable, shut off gas/water; allow hot surfaces to cool
• Open the door to access the bumper location
• Remove the worn bumper and clean the contact area for proper seating
• Install the new bumper fully seated and aligned; test door operation

This water tube directs water from the dispenser/water system to the appliance's internal components, restoring proper water flow and preventing leaks when the original tube is cracked or clogged. Durable replacement for wet or restricted lines. What it does:

• Routes water from the inlet/valve to the dispenser, icemaker, or internal plumbing.
• Replaces cracked, split, or collapsed tubing that can cause leaks or reduced water flow.
• Helps stop visible pooling or dripping under the cabinet or inside the fresh food section.
• Restores normal water delivery to the dispenser or icemaker when the original tube is obstructed or damaged.

• Disconnect power and shut off the water supply before beginning any repair.
• Inspect fittings and seals; replace any worn gaskets or clamps to ensure a leak-free connection.
• Tighten fittings by hand first, then snug with an appropriate tool—avoid overtightening plastic fittings.
• Test the system at low pressure after installation and check carefully for leaks before restoring full operation.

This rubber pad cushions and isolates appliance components to reduce vibration and noise while protecting surfaces from wear. It's a simple replacement that restores stability and helps prevent rattling during operation. What it does:

• Acts as a vibration/isolation cushion between moving parts and the cabinet or frame
• Dampens noise and reduces rattling during operation
• Helps protect metal and painted surfaces from abrasion and wear
• Maintains proper spacing to prevent rubbing or contact-related damage

• Disconnect power to the appliance before servicing to avoid injury
• Replace the pad where worn, flattened, or missing; location varies by model
• Use appropriate hand tools and support surrounding components to avoid damage
• If multiple pads are used in the same area, replace all matching pads for even support

This replacement door gasket seals the refrigerator or freezer door to maintain proper temperature and help prevent moisture and frost buildup. A direct-fit seal that restores an airtight closure and improves appliance efficiency. What it does:

• Creates an airtight seal around the door to help keep cold air in and warm air out
• Reduces frost and condensation buildup inside the compartment
• Helps the appliance maintain set temperatures for better food preservation
• Can reduce run time by preventing air leaks that force the compressor to work harder

• One replacement door gasket

• Inspect the door frame and mounting channel for damage or debris before installing
• Warm the gasket slightly (per OEM guidance) to ease alignment, and press into the mounting channel uniformly
• Check for an even seal around the full door after installation; adjust as needed
• Unplug the appliance before performing any service and follow all safety warnings from the manufacturer

Replacement screw that secures panels, brackets, and other components inside your appliance, keeping assemblies tight and aligned. Replace missing or stripped hardware to eliminate looseness, reduce vibration, and restore a solid, factory-fit hold.

• Fastens panels, brackets, trim, or internal components
• Helps maintain alignment and reduce rattling/vibration
• Replaces missing, loose, rusted, or stripped hardware
• Common signs: stripped head/threads, loose panel, buzzing/rattling noises

• Disconnect power before service; shut off gas/water if applicable
• Match to the original screw; start threading by hand to avoid cross-threading
• Use the correct driver size to prevent stripping
• Tighten snugly; do not overtighten. If it won't hold, inspect the receiving hole/clip

Tempered glass shelf provides a sturdy, easy-to-clean surface for refrigerator storage. Replaces cracked, chipped or missing shelving to restore usable shelf space and keep foods organized. What it does:

• Provides a flat, stable surface for containers, plates and bottles.
• Helps contain spills and is simple to wipe clean.
• Replaces shelves that are cracked, chipped or broken so items don't slide or fall through.
• Sits in factory shelf supports to restore original storage layout.

• Empty the shelf area and remove food before installing.
• Handle tempered glass carefully and wear protective gloves to avoid cuts.
• Set the shelf into the existing supports; confirm it sits level before returning items.

A genuine replacement screw used to secure appliance panels, brackets, and components so assemblies stay aligned and stable. Installs quickly with a screwdriver or driver bit to restore proper fit and reduce rattling. What it does:

• Secures panels, trim, brackets or internal components to keep parts properly aligned
• Prevents loose or vibrating panels that can cause noise or wear
• Holds mounting points that keep doors, seals, and assemblies operating correctly
• Replaces stripped, missing, or corroded fasteners that compromise fit

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or deform parts
• Keep removed hardware organized and replace like-for-like for best fit

This door bumper cushions and stabilizes the appliance door to reduce noise and wear from slamming. It helps the door close smoothly and maintain proper alignment for reliable operation. What it does:

• Absorbs impact to prevent metal-on-metal contact and reduce slamming noise
• Helps the door sit evenly to improve latch engagement and sealing
• Reduces vibration and rattling during operation
• Simple replacement that restores proper door feel and alignment

• Disconnect power to the appliance before starting any repair
• Access the bumper by opening the door; some models may require removing the door or inner panel
• Press or snap the bumper into the locating hole or slot until secure; replace any retaining clips if present

The Drain Funnel is an OEM part for Whirlpool French door refrigerators. It serves as the sloped plastic strainer that guides water from the evaporator coils s it into the drip pan below. 

Causes of a faulty Drain Funnel include cracks or punctures developing from continuous use transferring water weight. Mineral deposits or food particles that gradually collect on funnel surfaces could restrict proper drainage as well over time.

Symptoms involve: 

• Puddling or spilled water inside refrigerator interiors
• Uncontrolled leaks potentially damaging other components  
• Restricted airflow if funnel clogs from sediment buildup
• Musty odors developing without efficient drainage management

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement door gasket creates a tight seal to help prevent leaks and maintain proper appliance performance. It restores the sealing surface around the door so the appliance can operate as intended. What it does:

• Seals the door opening to help prevent water or air from escaping
• Helps maintain consistent internal temperature and cleaning performance
• Reduces leaks and pooling beneath the appliance
• Can eliminate drafts, rattling, or improper door closure related to a worn seal

• One gasket

• Designed for direct replacement; inspect mounting channel for damage before installing
• Clean the sealing surface and remove old adhesive or debris for a proper fit
• Press gasket fully into the channel and verify an even seal around the entire door
• Disconnect power and water before servicing