Krmf706ebs Parts

This cover corner replaces a missing or damaged corner trim piece to restore the refrigerator's interior/exterior finish and help keep shelves and bins seated properly. It provides a clean, finished look and protects edges from wear. What it does:

• Replaces the corner trim/filler that covers panel edges or joins interior liners
• Helps keep adjoining panels, shelves or bins aligned and reduces gaps
• Restores appearance after chipping, cracks or impact damage

• Designed for drop-in or snap-on installation; verify fit against the appliance before final assembly
• Use basic hand tools; avoid excessive force which can crack plastic parts
• Disconnect power if removing interior panels or working near electrical components

This compressor mounting grommet kit replaces worn or damaged rubber mounts that secure the compressor and reduce vibration. Restoring proper mounts helps cut down on compressor noise and prevents movement-related wear. What it does:

• Cushions and isolates the compressor to reduce vibration and rattling noise
• Keeps the compressor secured to its mounting bracket during operation
• Helps prevent stress and wear on mounting hardware and tubing
• Addresses symptoms like excessive vibration, banging, or unusual compressor noise

• Disconnect power to the appliance before beginning any repairs
• Support the compressor while removing and installing mounts to prevent strain or shifting
• Use appropriate hand tools and avoid over-tightening fasteners that can compress or damage grommets

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

This hex-head sheet metal screw secures refrigerator panels, brackets, and other internal components. Replacing a missing, corroded, or stripped screw helps keep parts tight, reduces vibration noise, and maintains proper alignment of covers and assemblies.

• Fastens sheet-metal panels, ducts, brackets, and trim inside the cabinet
• Helps maintain a secure fit and reduce rattles or buzzing
• Restores alignment when an original fastener is missing or damaged
• Common signs include loose or vibrating panels, a stripped screw head, or a screw that won't tighten

• Unplug the refrigerator and shut off water supply if working near ice/water components
• Use the correct nut driver or socket for the hex head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace screws one at a time to help keep parts aligned

This clip kit secures small panels, wiring harnesses, or trim on compatible Whirlpool appliances to prevent rattling and keep components in their intended position. It restores proper fit and helps reduce noise from loose parts. What it does:

• Holds wiring harnesses and cables in place to prevent chafing or contact with moving parts
• Secures panels, trim, or hoses so assemblies stay aligned and quiet
• Reduces rattling, buzzing, or vibration caused by loose components
• Keeps parts positioned during normal use and transport

• Disconnect power (unplug or shut off breaker) before starting any repair
• Use basic hand tools; avoid forcing clips into place to prevent breakage
• Replace any damaged clips with the exact kit to ensure proper fit
• Re-check that fastened parts are secure and that there are no pinched wires before restoring power

This genuine replacement screw secures appliance components for reliable fit and function, helping restore proper assembly and reduce rattling or loose panels. Use it to replace a stripped or missing fastener during repairs. What it does:

• Fastens panels, brackets, or components to maintain structural stability
• Prevents movement that can cause noise, vibration, or misalignment
• Replaces stripped, corroded, or missing screws to restore secure assembly
• Compatible where the OEM mounting screw is required for safe operation

• Turn off and unplug the appliance before performing any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Do not overtighten; snug until secure to prevent damage to parts
• If other fasteners show wear, inspect and replace as needed for safe operation

This replacement divider restores simple organization inside the refrigerator by separating items on a shelf or bin to reduce shifting and spills. It replaces a cracked, broken or missing factory divider and helps keep stored items upright. What it does:

• Creates separate zones on a shelf or bin to keep bottles, jars and small items from sliding together
• Helps prevent items from tipping or falling when the door or drawers are moved
• Replaces worn, broken or missing dividers to restore proper fit and stability
• Works with the fridge's existing slots or tracks for a secure hold

• Typically installs by snapping into existing slots or sliding into the shelf/bin track; no special tools are usually required
• Remove food and the affected shelf or drawer for easier access and to avoid mess
• Do not force the part into place; inspect mounting clips or tracks and replace any damaged hardware
• If working near electrical components or lights, unplug the appliance or switch power off before starting

This rear icebox gasket seals the freezer/icebox compartment to help maintain proper temperature and reduce frost buildup. It restores the door seal so the appliance runs more efficiently and prevents moisture intrusion. What it does:

• Seals the icebox/freezer compartment to keep cold air in and warm, humid air out
• Helps prevent frost and ice buildup inside the icebox
• Reduces temperature fluctuations that can cause food spoilage
• Can stop condensation or water pooling caused by a failing door seal

• Unplug the appliance before attempting replacement
• Remove the old gasket fully and clean the mounting channel before installing the new seal
• Press the new gasket into the channel evenly; allow time for the gasket to form to the door

Color: White. Size: 13 oz. Spray paint primer. can.

This replacement screw fastens appliance components to restore secure connections and reduce vibration or rattling. Use it when panels, brackets, or assemblies are loose or moving. What it does:

• Secures panels, brackets, and small appliance parts to prevent movement
• Restores proper alignment for doors and trim that shift from loose hardware
• Helps eliminate vibration noise caused by loose fasteners
• Works with assemblies that use standard machine/sheet-metal screws

• Disconnect power or gas supply before servicing the appliance
• Use the correct driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or damage parts
• Inspect surrounding components and replace any damaged clips or hardware as needed

Color: Black
 

This wire harness is an OEM-style electrical assembly that restores factory wiring connections for the appliance. It replaces damaged or worn wiring to help re-establish reliable power and signal routing to components. What it does:

• Provides factory-style connectorized wiring to restore electrical continuity between control and components
• Replaces frayed, burned, or broken wires that cause intermittent power or component failure
• Helps fix no-power or erratic operation symptoms related to damaged wiring
• Prevents makeshift splices that can cause shorts or further damage

• Disconnect all power (unplug or shut off breaker) before accessing internal wiring
• Match connector shapes and wire colors; route harness exactly as original and secure with existing clips
• Inspect mating connectors and terminals; replace if corroded or damaged

The Heater is an OEM part for Whirlpool refrigerators. It helps prevent frost and ice buildup in the refrigerator. It is responsible for melting any accumulated ice or frost, allowing for proper airflow and maintaining ideal temperature levels.

A bad refrigerator heater can occur due to electrical malfunctions, wear and tear, or damage to the heating element. If you notice symptoms such as excessive frost or ice buildup, reduced cooling efficiency, or water leakage, it may be time to replace the refrigerator heater.

Symptoms of a bad refrigerator heater include:

• Excessive frost or ice buildup 
• Reduced cooling efficiency
• Water leakage

Repair your refrigerator by replacing the faulty or worn-out heater with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This chute door retainer secures the ice chute door in place so the dispenser opens and closes properly, helping keep ice inside the bin and preventing jams at the dispenser opening. What it does:

• Holds the ice chute/door assembly in the correct position during dispensing
• Helps ensure the ice door seals and swings closed to keep cold air in the bin
• Reduces jammed or stuck ice at the dispenser opening
• Works with the chute/door linkage so the dispenser actuates smoothly

• One chute door retainer as shown

• Disconnect power to the refrigerator before beginning any service
• Remove ice bin and any obstructions, then unclip or unscrew the old retainer and replace with the new part
• Reassemble components in reverse order and verify proper door movement before restoring full use

This replacement outer cover restores the appliance's exterior protection and appearance by shielding internal components from dust and debris and helping reduce noise from loose parts. A direct-fit repair for visible damage or missing panels. What it does:

• Protects internal components and wiring from dust, lint, and accidental contact
• Helps maintain proper airflow paths and prevents debris buildup
• Reduces rattles and vibration caused by a damaged or loose cover
• Improves appliance appearance when the original cover is cracked, warped, or missing

• Always unplug the appliance or disconnect power before starting work
• Remove any necessary access panels or trim to reach mounting screws or clips
• Transfer any hardware, gaskets, or insulation from the old cover if required
• Tighten fasteners securely and test the appliance for proper operation after reassembly