Krsb27qabl07 Parts

This condensate drain pan sits at the base of the refrigerator to collect defrost water and allow it to evaporate over the warm compressor, helping prevent floor puddles, moisture damage, and musty odors around the unit.

• Collects and holds defrost condensate from the drain tube (also called a drain pan or drip tray)
• Stages water to evaporate safely using compressor/condenser heat
• Replace if the pan is cracked, warped, missing, or leaking
• Common symptoms: water under/behind the refrigerator, damp flooring, or persistent musty odors near the bottom rear

• Unplug the refrigerator and pull it away from the wall; shut off water supply if connected
• Remove the rear lower access panel to reach the pan near the compressor
• Lift out the old pan; clear any debris from the drain outlet; transfer original mounting hardware if needed
• Seat the new pan level under the drain tube; ensure it's secure and reinstall the access panel

This is a rear panel cover that attaches to the back of the refrigerator, enclosing and protecting internal components. It helps maintain proper airflow and keeps dust and debris away from mechanical and electrical parts. Replace this cover if it is cracked, warped, or missing, which can lead to reduced cooling efficiency or excessive noise.

Replace worn refrigerator door hinge cam bushings to restore smooth door swing and proper alignment. Fixes doors that don't close fully or seal correctly.

Lower front grille that covers the base opening of your refrigerator. Replace if cracked, broken, or missing to restore a finished look.

This refrigerator glass shelf sits over the crisper drawers to create a sturdy storage surface and support humidity-controlled bins below. Replacing a damaged shelf restores safe, level storage and helps maintain proper drawer function.

• Provides a flat surface for food storage above the crisper area
• Supports crisper drawers and helps them slide properly
• Replace if cracked, shattered, sagging, or missing
• Can help address spills leaking into drawers due to broken or missing glass

• Unplug the refrigerator and remove contents from the shelf area
• Carefully lift out the old glass; handle broken glass with cut-resistant gloves
• Clean the frame/trim before setting the new glass in place
• Ensure the glass is fully seated and level before reloading food

Replace a cracked, chipped, broken, or missing glass shelf in your refrigerator. Restores a flat storage surface for organized food and containers.

Replace a cracked, broken, or missing glass shelf in your refrigerator's freezer compartment. Restores a stable surface for organizing frozen foods.

This light socket holds the interior appliance bulb and connects it to the unit's wiring. Replace a damaged or loose socket to restore dependable cabinet lighting when the door is opened.

• Secures the interior light bulb and provides reliable electrical contact
• Supplies power to the lamp when the door switch closes
• Helps resolve flickering or intermittent lighting from a worn or heat-damaged socket
• Common symptoms: light won't turn on, bulb won't seat or stays loose, visible charring at the socket

• Disconnect power to the appliance before servicing
• Remove the lens/cover and bulb; release the socket from its mounting
• Transfer wires one at a time to the new socket and ensure snug connections
• Reinstall bulb and cover, restore power, and test; use the bulb type/wattage specified by the manufacturer

Catches water and spills beneath your refrigerator's ice and water dispenser. Replace if cracked, stained, or missing to protect the door from moisture.

Rubber grommet kit that mounts and cushions the compressor. Replace worn, cracked, or damaged grommets to restore proper support and isolation.

Replacement glass shelf for side-by-side refrigerators. Installs on shelf supports inside the fresh food compartment. Needed when original is cracked, chipped, or broken.

This sachet holder housing assembly secures single-use detergent or cleaning sachets inside the dispenser so they stay in place and release correctly during cycles. Replacing a cracked or broken holder restores reliable sachet positioning and dispensing. What it does:

• Holds detergent/cleaning sachets in the dispenser so they don't shift or drop into the tub.
• Ensures sachets stay aligned for proper release during the wash or cleaning cycle.
• Helps prevent sachets from rupturing or blocking the dispenser area.
• Common symptoms of a bad holder: sachets falling out, sachets not dispensing properly, or poor wash/cleaning results.

• Disconnect power (and water, if required) before servicing the dispenser area.
• Access the dispenser per the owner's manual; the holder typically snaps into place or secures with a small fastener.
• Handle plastic clips and tabs gently to avoid breakage; use a non-marring pry tool if needed.

This is a decorative trim piece that attaches to the front of a refrigerator deli or pan drawer, giving it a finished appearance and serving as a handle for opening and closing. It snaps or screws onto the drawer front panel. Replace this trim if it is cracked, broken, discolored, or has come loose from the drawer.

Door won't close or latch properly? This door cam guides the latch mechanism to restore secure door closure and prevent gaps or misalignment issues.

This ice door support bracket holds and stabilizes the freezer ice door so it opens and closes smoothly and keeps the ice compartment sealed. Replaces a worn or broken support to restore proper door alignment and operation. What it does:

• Supports the ice door assembly to prevent drooping or misalignment
• Helps ensure the ice door opens and closes smoothly for reliable dispensing
• Reduces rattling or noise from a loose or damaged door support
• Prevents gaps that can lead to frost buildup or ice spillage

• Disconnect power to the appliance before starting any repair
• Remove the ice bin or door panel per service instructions to access the support
• Use common hand tools; handle plastic parts gently to avoid cracking
• Secure all fasteners; test door movement after installation

Graphite spray paint for appliance touch-ups. Covers chips, scratches, and scuffs on dryer drums, washer panels, and exterior surfaces. Restore finish.