Krsc503ess Parts

This fan mounting bracket secures the evaporator/condenser fan assembly and helps direct airflow for consistent cooling performance. It restores proper fan alignment and airflow when the original bracket is damaged or loose. What it does:

• Holds the fan motor/blade assembly in the correct position to prevent wobble and contact with housing
• Channels airflow for efficient heat exchange and temperature control
• Reduces vibration and noise caused by a broken or bent bracket
• Helps prevent fan-related contact damage to nearby components

• Inspect surrounding components for damage before installing; replace any worn fasteners
• Use appropriate hand tools; avoid overtightening to prevent cracking the bracket
• Disconnect power to the appliance before beginning work to avoid injury

Sealer for refrigerant line insulation.

This wire harness is the factory-style electrical assembly that connects appliance components and control circuits, restoring reliable power and signal routing for proper operation. Use it to replace damaged, frayed, or disconnected wiring. What it does:

• Routes power and signals between the control board and appliance components
• Restores lost or intermittent electrical connections that can cause failures
• Prevents arcing and shorts by replacing worn or damaged wiring and terminals
• Helps ensure correct connector fit and secure circuit continuity

• Disconnect power to the appliance before starting any repair.
• Handle connectors by the housings; avoid pulling on wires or bending terminals.
• Route the harness following the original wire paths and secure with existing clips or fasteners.

This reservoir is the molded water tank that stores and directs water inside the appliance, ensuring steady supply to the dispenser and ice-making system. Replaces a cracked, leaking, or damaged tank to restore proper water delivery. What it does:

• Holds and routes water used by the dispenser and ice system
• Prevents leaks when intact; cracks or damage can cause visible water under or around the appliance
• Replacing a failed reservoir can stop intermittent dispenser flow or slow ice production caused by leaks or loss of pressure
• Works with factory fittings and tubing to maintain correct water path and alignment

• 1 reservoir

• Disconnect power and shut off the water supply before starting work
• Handle the plastic tank carefully to avoid cracking fittings or mounting tabs
• Inspect and replace any damaged gaskets, clips, or tubing when installing
• After installation, reconnect water, check for leaks, and run the dispenser/ice cycle to verify proper operation

Color: Grey

This small white water filter cover secures and protects the refrigerator's inline/replaceable water filter, keeping the filter seated and helping direct water flow for the dispenser and ice maker. Replaces a cracked, warped, or missing cover to restore a proper seal. What it does:

• Holds the water filter in place so it seals correctly and prevents leaks
• Shields the filter from dirt and damage inside the housing
• Helps maintain correct water flow to the dispenser and ice maker
• Commonly replaced when cover is cracked, broken, or will not latch

• One water filter cover (small, white)

• Turn off the refrigerator water supply and dispense any remaining pressure before removing the old cover
• Handle gently to avoid damaging the filter housing or sealing surfaces
• Ensure the replacement cover is fully seated and latched; check for leaks after restoring water

This cover-wire protects and organizes a machine's wire harness to help prevent chafing and accidental contact with hot or moving parts. It keeps wiring routed and out of the way for safer, more reliable appliance operation. What it does:

• Shields wiring from abrasion and contact with sharp edges or moving components
• Helps prevent intermittent electrical faults caused by rubbing or pinched wires
• Keeps harnesses neatly routed for easier service and reduced strain on connections
• Useful when you see visible wear on insulation or wires rubbing against chassis parts

• One cover-wire as shown

• Disconnect power to the appliance before inspecting or replacing wiring components
• Verify correct routing and orientation; secure into existing clips or mounting locations
• Do not splice, modify, or stretch the part; replace if damaged
• If you see melted insulation, burnt wiring, or connector damage, replace affected wiring/components per OEM guidance

This replacement clip secures the defrost heater to the evaporator so the heater stays in proper contact and defrosts frost buildup efficiently. Durable, OEM-style retention clip designed for refrigerators. What it does

• Secures the defrost heater to the evaporator assembly to ensure consistent defrost cycles
• Prevents the heater from shifting or coming loose, which can cause frost buildup or interrupted defrosting
• Helps maintain proper contact for efficient heat transfer during defrost
• Small, inexpensive part that can prevent larger ice/frost-related issues

• Disconnect power to the appliance before accessing the evaporator compartment.
• Handle the evaporator fins and heater element carefully to avoid damage.
• Typically installs with basic hand tools; replace any damaged or corroded clips.

This bin frame is the structural support that holds a refrigerator storage bin or drawer in place, restoring proper alignment and smooth operation. It prevents sagging and keeps the drawer securely seated for reliable everyday use. What it does:

• Supports and stabilizes the storage bin/drawer to prevent drooping or falling out
• Keeps the drawer aligned for smooth sliding and proper sealing
• Reduces rattling or noisy operation caused by a broken or bent frame
• Helps prevent caught or jammed drawers that won't open or close fully

• Disconnect power to the appliance before beginning work to reduce shock risk
• Remove food and the drawer/bin before replacing the frame
• Use basic hand tools; avoid forcing parts to prevent damage
• Inspect adjacent clips or slides and replace if worn for best fit

Size: 1/4 lb.

This ice bin latch assembly secures the refrigerator's ice container so it stays seated and aligned with the auger drive. Replace a worn or broken latch to restore consistent ice dispensing and a snug fit.

• Locks the ice bin in place and aligns it with the auger/dispenser drive
• Helps prevent the bin from wobbling, shifting, or popping loose
• Can resolve no or intermittent ice dispensing caused by bin misalignment
• Direct replacement when the latch is cracked, worn, or missing

• Disconnect power to the refrigerator; turn off the water supply if needed
• Remove the ice bin to access the latch area
• Release retaining tabs/fasteners, note orientation, and install the new latch assembly
• Verify smooth latch engagement before reinstalling the bin and restoring power

The Ice Chute Mounting Bracket is an OEM replacement part for Whirlpool side-by-side refrigerators. It securely positions the removable ice chute opening above the storage bin.

Causes for bracket failure involve standard wear from long-term usage. Repeated lifting of the chute subjects mounting screws and anchors to consistent force strains over many seasons. 

Symptoms requiring replacement involve:

• Loose, sagging or detached ice chute positioning
• Lost or stripped mounting fasteners  
• Ice jamming or spillage due to misaligned openings
• Safety hazards from potential pinch points

This authentic Whirlpool replacement is compatible with Jenn-Air, KitchenAid and Maytag panel-ready stainless steel refrigerators as well.