Krsf505e5500 Parts

This trim pan is an exterior trim panel that restores the finished appearance and helps protect internal components from dust and debris. It provides a clean edge and secures adjacent panels for a finished look. What it does:

• Covers and protects internal openings behind the appliance's trim area
• Secures adjacent trim pieces and maintains a flush, finished appearance
• Helps reduce rattling or gaps caused by damaged or missing trim
• Visible damage, bent edges, or loose fit are common signs it needs replacement

• One trim pan

• Disconnect power (and gas if applicable) before servicing
• Remove surrounding trim or panels as needed to access mounting fasteners
• Handle edges carefully — trim pieces can be sharp
• Reuse original mounting hardware only if undamaged; check alignment before tightening

This black plastic corner cover replaces a damaged or missing exterior trim piece to restore the appliance's finished appearance and protect internal edges from dirt and wear. Fits the factory location and matches original styling. What it does:

• Covers and protects the appliance corner or trim area from chips, scuffs, and debris.
• Restores a clean, finished look where the original corner piece is cracked, broken, or missing.
• Helps keep moisture and grime from reaching internal seams at the corner.
• Matches the original color and shape to maintain the appliance's aesthetic.

• Install with the appliance powered off and unplugged for safety if cover removal exposes wiring.
• Remove any broken fragments and clean the mounting area before installing the new cover.
• May snap or screw into place depending on model; keep fasteners from the original cover for re-use.

This cover is an OEM replacement access panel that restores the appliance's exterior protection and helps keep internal components free from debris. It fits where the original cover was removed or damaged. What it does:

• Protects internal components from dust, lint and incidental contact
• Restores a secure exterior surface and maintains proper airflow paths
• Helps prevent accidental contact with moving or electrical parts behind the panel
• Reinstates the appliance's original appearance where the cover was missing or damaged

• One replacement cover

• Disconnect power (and gas, where applicable) before starting any work
• Remove fasteners holding the old cover and retain hardware if reusing; compare new part to old for orientation before installing
• Use basic hand tools; avoid forcing clips or tabs to prevent breakage

This glass shelf provides a sturdy, easy-to-clean surface for organizing food and containers inside the refrigerator. Replaces broken, chipped, or scratched glass shelves to restore usable storage space and visibility. What it does:

• Supports food, beverages and containers on a flat, tempered glass surface
• Restores a secure shelf after cracks, chips or breakage
• Helps keep refrigerator interior organized and accessible
• Maintains proper airflow when installed in original shelf supports

• Handle with care; glass is heavy and can chip—wear gloves and safety glasses
• Slide shelf into place on existing supports; do not force or flex the glass
• Confirm correct shelf position and support rails before loading with items
• If mounting hardware or supports are damaged, replace them before use

Color: White. Size: 1 qt. can. Acrylic appliance paint.

The Dispenser Drip Tray is an OEM part for Whirlpool refrigerators featuring internal or through-the-door dispensers. Located below the dispenser mechanism, it collects residual liquid and prevents spills. The drip tray's angled design helps direct any drips into its drainage port.

Symptoms of a faulty dispenser drip tray include:

• Puddles or spills below the dispenser area
• Wetness inside refrigerator walls near the dispenser system  
• Mold growth from unattended moisture collecting

Causes may involve cracks that create leaks, clogged drains impair drainage, or a loose or damaged seal around the tray.

This OEM replacement fits many Whirlpool, Maytag, KitchenAid and Kenmore models.

This fitting connects a flexible water or drain hose to the appliance, restoring a secure, leak-free connection. It's a small replacement part that prevents drips and keeps water flowing where it's needed. What it does:

• Joins a hose to the appliance inlet, outlet, or valve for a sealed connection
• Helps stop leaks at the hose connection point
• Restores proper water flow when a damaged or corroded fitting is replaced
• Works with the appliance hose system; commonly replaced when connections are loose or leaking

• Turn off and unplug the appliance and shut off the water supply before replacing the fitting
• Drain residual water from the hose or lines to avoid spills
• Hand-start threads, then tighten securely with appropriate tool; avoid over-tightening
• Inspect and replace any O-rings or gaskets if worn to ensure a watertight seal

The Cover-Wire is an OEM part for Whirlpool refrigerators. It plays a vital role in maintaining safe and reliable operation by protecting critical electrical wiring inside the refrigerator. 

Causes of a bad Cover-Wire include natural wear and tear over prolonged use. Repeated opening and closing of the refrigerator door subjects the wires to stress that can cause cracks or splits in the protective insulation. 

Symptoms of a bad Cover-Wire include:

• Dimming or flickering lights inside the refrigerator/freezer 
• Fluctuations in interior temperatures
• Intermittent or complete failure of components like the ice maker or water dispenser
• Buzzing or cracking sounds from exposed wires

This genuine Whirlpool replacement is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models as well.

This drip tray catches and channels defrost and condensation water to prevent pooling under the appliance. It restores proper water flow and helps protect floors from leaks when placed correctly under the evaporator area. What it does

• Collects defrost and condensation water from the evaporator area
• Directs water to the drain system or evaporation zone to prevent leaks
• Helps stop water pooling or dripping beneath the appliance
• Reduces risk of moisture-related odors and floor damage when functioning properly

• Disconnect power to the appliance before accessing internal parts
• Access from the freezer/refrigerator bottom or back panel per your model's service guide
• Slide or snap the tray into the mounting location; ensure proper alignment with drain channels
• Inspect surrounding seals and drain lines for clogs or damage while replacing the tray

This replacement mounting plate secures internal components and restores proper alignment so panels and assemblies sit correctly. It's a direct-fit OEM plate used where a stable mounting surface is required. What it does

• Secures and supports internal components to prevent shifting or vibration.
• Restores proper alignment for panels or assemblies that rely on the plate for fit.
• Helps eliminate noises or rattling caused by a loose or damaged plate.
• Maintains the original mounting points for fastener reattachment.

• Disconnect power to the appliance before starting any repair.
• Keep track of fasteners and mounting hardware; reuse original screws unless damaged.
• Use basic hand tools; avoid over-tightening fasteners which can strip threads or warp the plate.