Ksd-110Lc Parts

Size: 10-32

Replacement burner cap kit for gas cooktops that restores proper flame shape and protects the burner head from spills and debris, helping burners heat more evenly and reducing ignition issues. What it does:

• Sits over the burner head to shape and stabilize the flame for consistent cooking
• Shields burner ports from spills and food build-up that can clog ports and affect flame
• Replaces cracked, chipped or missing caps that cause uneven heating or noisy flames
• Can help improve ignition reliability when burner ports are clear and caps are seated correctly

• Turn off the gas supply and ensure the cooktop is completely cool before servicing
• Typically installs by lifting off the old cap and placing the replacement into position; do not force parts
• Clean burner head and ports of debris before installing new cap to ensure proper seating and flame

This backsplash restores the rear trim behind a range or cooktop, protecting the wall and covering wiring openings for a clean, factory-look finish. It replaces a damaged, dented, or missing backsplash to improve safety and appearance. What it does:

• Covers the gap between the cooktop and the wall to block spills, splashes, and heat from reaching the wall surface
• Hides wiring and mounting holes for a neat, finished look
• Replaces bent, cracked, or corroded rear trim that can collect grease and grime
• Helps maintain proper clearance and original appearance of the appliance

• One single-piece backsplash

• Basic hardware and mounting locations are OEM-specific; confirm matching fasteners on arrival
• Turn off power to the appliance and move the unit away from the wall before removing or installing the backsplash
• Use care to avoid scratching the finish during installation; two people may be needed for larger ranges
• If mounting holes or brackets are damaged, replace those items before installing this backsplash

Replacement gasket that restores a tight seal to the appliance door and helps prevent water or air leaks. Replaces worn, cracked, or compressed seals so the door closes properly and reduces moisture or heat loss. What it does:

• Seals the door opening to stop leaks of water, steam, or heated air.
• Helps maintain proper temperature and efficiency by preventing air exchange.
• Reduces condensation, odors, and cycling caused by a poor seal.
• Common signs you need this part: visible gaps or damage, leaks around the door, excess moisture, or poor heating/cooling performance.

• Disconnect power and water (if applicable) and allow the appliance to cool before starting.
• Clean and dry the mating surface to ensure a proper fit; remove old adhesive or debris.
• Align the gasket into the door channel or groove and press evenly; avoid stretching the material.
• If the door or mounting hardware is bent or damaged, repair those parts before installing the gasket.

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

20 pack. Safe on all glass and ceramic surfaces.

This mounting bracket secures and supports appliance panels and internal components to keep assemblies aligned and stable during operation. It restores proper fit and prevents excessive vibration or movement in the affected area. What it does:

• Provides a sturdy attachment point for cabinet panels and internal parts
• Helps maintain correct alignment to reduce rattling and vibration
• Restores secure mounting after damage, wear, or during reassembly
• Commonly used when panels are loose, misaligned, or produce noise

• One mounting bracket

• Turn off and unplug the appliance before beginning any repairs
• Verify bracket orientation and fastener locations match the removed part
• Use the original screws or OEM-recommended fasteners; replace any stripped hardware

This replacement drawer panel restores the finished front appearance and structural support of the appliance drawer, helping the drawer close and align correctly while covering internal components for a clean look. What it does:

• Replaces a cracked, dented, or cosmetically worn drawer front to renew the appliance appearance.
• Provides the mounting surface and edge trim that helps the drawer sit square and operate smoothly.
• Covers internal drawer components and fasteners for a finished, appliance-matching look.
• Helpful when the original panel is bent, scratched, or no longer secures to the drawer frame.

• High-level: remove the drawer and any trim clips or screws to swap panels; use basic hand tools.
• Handle edges carefully—replacement panels and fasteners can have sharp edges.
• Keep all original screws and mounting clips; replace any damaged fasteners before reassembly.

This trim vent replaces a damaged or worn vent grille to restore proper airflow appearance and help direct air where the appliance needs it. It's a direct-replacement exterior trim piece that cleans up the unit's vent opening. What it does:

• Covers and protects the appliance vent opening while providing a finished appearance
• Directs airflow and helps prevent debris from entering the vent area
• Replaces cracked, broken, or faded vent trim that affects appearance or fit
• Helps reduce rattling or loose trim that can occur with damaged vent pieces

• One trim vent (single grille piece)

• Disconnect power to the appliance before beginning any work
• Typically installs with snap-in tabs or a few screws; avoid forcing to prevent breakage
• Inspect surrounding clips or screws and replace if worn for a secure fit

The Oven Rack is an OEM part for Whirlpool ranges,  designed to enhance the baking and roasting capabilities of your oven. This high-quality rack provides a sturdy and level surface for placing cookware, ensuring even heat distribution and consistent cooking results. Crafted to fit perfectly within Whirlpool ovens, this rack can be easily adjusted to different heights, accommodating a variety of dishes and baking needs.

Signs that you might need to replace the Oven Rack include warping or damage from high temperatures, difficulty sliding the rack in and out, or corrosion that could potentially contaminate food.

Symptoms of a bad Oven Rack include:

• Difficulty fitting the rack securely within the oven, indicating possible warping or damage.
• Uneven cooking or baking results, due to poor heat distribution from a damaged rack.
• Challenges in sliding the rack in and out smoothly, which can affect cooking efficiency and safety.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This orifice spud is the small metal fitting that meters gas to a cooktop or range burner, restoring proper flame size and heat control. It fits into the burner manifold to direct fuel flow for safe operation. What it does:

• Regulates gas flow to a specific burner for correct flame height and heat output
• Helps restore even or full-strength flames when a burner is weak or uneven
• Can resolve ignition difficulty or burners that won't stay lit when caused by a worn or damaged spud
• Works as a direct replacement for the corresponding burner orifice in the manifold assembly

• One orifice spud

• Turn off the appliance's gas supply and electrical power before servicing
• Use appropriate wrenches and avoid overtightening to prevent damage to threads
• After installation, check all connections for gas leaks with a soap solution; do not use an open flame

A self-tapping screw used to secure appliance panels and components, providing reliable fastening to sheet metal and plastic parts. Replaces worn or missing fasteners to restore proper fit and reduce rattling. What it does:

• Fastens panels, brackets, or trim to appliance frames and housings
• Creates its own threads in sheet metal or plastic for a secure hold
• Helps stop loose panels, vibration noise, and misaligned parts
• Commonly used where a short, durable fastener is needed

• Disconnect power and water before starting any repair
• Use the correct screwdriver or driver bit to avoid stripped heads
• Start threads carefully and avoid over-torquing to prevent damage
• Wear eye protection and gloves when working with sheet metal

This factory screw secures panels, brackets, or trim within your appliance. Replacing a missing or stripped fastener restores a tight fit, reduces vibration and rattles, and helps keep components aligned for reliable, long-term performance.

• Fastens panels, brackets, or trim to the appliance cabinet/frame
• Replaces damaged, rusted, or missing hardware
• Helps eliminate vibration noises, gaps, and loose-fitting parts
• Supports proper alignment of adjoining components

• Disconnect power; turn off gas/water supplies where applicable.
• Match to the original screw from your model's parts diagram before installation.
• Start threads by hand to avoid cross-threading; use the correct driver bit for the head.
• Tighten snugly—do not overtighten to prevent stripping threads or cracking plastic bosses.

This oven door glass replaces a cracked or damaged glass panel to restore a safe, clear viewing area and help contain heat inside the oven cavity. It fits into the oven door assembly and lets you check cooking progress without opening the door. What it does:

• Replaces a broken, cracked, chipped or scratched oven door glass panel
• Restores a clear viewing window so you can monitor food without opening the door
• Helps maintain proper oven cavity containment when installed correctly
• Improves safety by removing damaged glass that could shatter

• Disconnect power to the appliance before starting any repair.
• Handle glass with heavy gloves and eye protection; place on a padded surface to avoid damage.
• Door removal or partial disassembly is commonly required; follow the oven manufacturer's service instructions.

This spacer secures and maintains proper spacing between adjacent appliance components to prevent rubbing and misalignment, helping restore smooth, stable operation after wear or replacement. What it does:

• Positions and cushions parts to prevent metal-on-metal contact and reduce noise or vibration
• Keeps components aligned for proper fit and function after panel or assembly reinstallation
• Helps maintain clearance for moving parts to avoid abrasion and premature wear
• Useful when replacing worn fasteners, clips, or assemblies that rely on precise spacing

• Disconnect power (unplug or switch off circuit breaker) before beginning any repair
• Handle small parts carefully and retain any associated fasteners; compare new part to old for orientation
• Use basic hand tools as required; avoid forcing parts into place to prevent damage

This burner cap fits over a gas cooktop's surface burner to help direct flame for even heating and protect the burner head. It restores proper burner appearance and helps maintain efficient flame pattern for cooking. What it does:

• Covers and protects the gas burner head from spills and debris
• Shapes and stabilizes the burner flame for consistent heat distribution
• Helps prevent flame disturbance that can cause uneven cooking or clicking
• Restores a finished look to the cooktop surface

• 1 burner cap

• Turn off gas supply and ensure all surfaces are cool before handling
• Remove loose debris and set the cap on the burner head so it seats evenly
• If cap is warped or does not sit flat, inspect burner head for damage or debris
• Use only manufacturer-recommended parts and follow your appliance's service instructions