Ksf85600bo Parts

The Water Reservoir Tubing is an OEM replacement part for Whirlpool refrigerators. It is a flexible plastic tubing that replaces the water reservoir and holds the water for the ice maker and dispenser.

Causes can include cracks from heat or cold exposure over time, punctures from sharp edges during installation, or deterioration of plastic tubing that impacts integrity.

Symptoms of bad water reservoir tubing include:

• Inaccurate or inconsistent ice production
• Leaks or water spills near the reservoir or ice maker
• Kinks or ruptures in the tubing that obstruct water flow
• Mineral buildup that clogs or restricts the line

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Note: As per manufacture this is no longer a tank. The tank style has been updated with coiled tubing.

This refrigerator snack pan is the small-item drawer in the fresh food compartment. Replacing a cracked or missing bin restores smooth sliding access and helps keep deli meats, cheeses, and snacks organized and contained. What it does:

• Provides a dedicated drawer for snacks and small items in the fresh food section
• Slides on the factory rails for easy access and organization
• Helps contain minor spills and prevents items from falling into lower areas
• Common signs it's time to replace: cracked or broken bin, damaged front lip, falls off track, or won't slide smoothly

• 1 refrigerator snack pan

• Remove food; lift the front slightly to disengage the old pan from the rails, then pull straight out
• If needed, remove the glass shelf above for clearance
• Inspect and clean the rails/supports before installing the new pan
• Align the new pan on the rails and slide in until fully seated—do not force

This is the refrigerator compartment deli/meat drawer pan. It replaces a cracked or missing bin so your items store neatly and the drawer slides and functions as intended.

• Provides a shallow storage bin for deli meats, cheeses, and small items in the fresh food section
• Slides on the existing shelf rails for easy access and organization
• Helps keep items contained to minimize spills and crushing
• Replace if the bin is cracked, has broken tabs, won't slide or align on the rails, or is missing

• Disconnect power before servicing; remove food from the area
• Align the drawer with both rails and slide it straight in until fully seated
• If needed, pull the supporting shelf forward slightly to engage the guides
• Handle room-temperature plastic gently; avoid forcing the bin to prevent cracking

Replace a broken or missing door shelf bin to restore secure, convenient storage on your refrigerator's door. This molded bin keeps bottles and condiments organized and within reach, helping prevent spills and shifting as the door opens and closes.

• Attaches to door rails to provide additional storage space
• Holds and organizes bottles, jars, and condiments
• Helps keep items from tipping or sliding during door movement
• Common symptoms: cracked bin, broken tabs, won't stay seated, items falling out

• Empty the door and lift the old bin straight up and out of the mounting slots
• Align hooks/tabs on the new bin with the door slots and press down until fully seated
• Confirm a secure fit before loading items; do not force the plastic
• No tools typically required; handle at room temperature to reduce risk of cracking

This fan motor retainer secures the refrigerator's fan motor to its mounting bracket or shroud, reducing vibration and keeping the fan aligned so air circulates properly for consistent cooling.

• Secures the fan motor to its bracket or shroud
• Maintains proper fan alignment and clearance for consistent airflow
• Helps reduce vibration, buzzing, or rattling from a loose motor
• A worn or missing retainer may present as scraping fan noises or uneven airflow

• Disconnect power to the refrigerator before servicing; allow moving parts to stop and wear cut-resistant gloves
• Access the fan area per your model
• Transfer the motor into the new retainer and reinstall using existing hardware as required
• Ensure the fan blade spins freely and clears the shroud before restoring power

This hinge shim installs at the bottom refrigerator door hinge to fine-tune door height and alignment. Replacing a missing or damaged shim helps the door close smoothly and seal evenly for reliable performance.

• Positions the door by spacing the bottom hinge for correct height and alignment
• Helps restore smooth closing and consistent gasket contact
• Useful after hinge or gasket service to set the door-to-cabinet gap

• Disconnect power before servicing
• Support the door; remove bottom hinge fasteners and lift the door off per your manual
• Add or replace shim(s) on the bottom hinge, then reinstall and tighten hardware
• Check level and uniform gasket contact around the door

Screw for control panel.

This cam-door is a direct-fit replacement part that helps the appliance door operate smoothly and latch securely for proper use. Restores correct door movement and helps prevent gaps or misalignment that stop the door from closing. What it does

• Guides and supports the door latch mechanism so the door opens and closes correctly
• Helps the latch engage fully to maintain a tight, secure door seal
• Worn or broken cams can cause the door to hang, fail to latch, or make scraping/catching noises
• Replacing a damaged cam often restores normal door alignment and operation

• Disconnect power (unplug or turn off circuit breaker) before starting any repair
• Access may require removing the door or inner panel
• Inspect surrounding latch components and replace any damaged parts for reliable operation

Rod retainer clip secures a support rod or shaft to keep moving parts aligned and stable during operation. Replacing a worn or broken clip prevents rattling, binding, or components falling out and helps restore proper mechanical function. What it does:

• Holds a support rod or shaft in place to maintain alignment of moving components.
• Prevents rods from sliding out or shifting, which can cause rattling, binding, or misalignment.
• Replace if the clip is bent, cracked, corroded, or no longer grips the rod securely.
• Common symptom: loose or misaligned parts, unusual noises, or components that detach during use.

• Disconnect power (unplug or shut off breaker) before servicing the appliance.
• Access may require removing panels, covers, or nearby components—follow the OEM service manual.
• Remove the old clip and carefully press or snap the replacement into place; avoid over-bending the clip.