Ksgt307hbt9 Parts

This spark switch harness connects the oven/range ignition switch to the spark module so burners or the oven igniter can receive the ignition signal. It restores proper spark delivery for safe, reliable ignition. What it does:

• Transfers the ignition switch signal to the spark/ignition circuit so burners or the oven igniter can spark
• Helps resolve symptoms like clicking at the control, intermittent or no spark at the burner/oven, or failure to light
• Maintains correct connector alignment and wiring routing for the ignition system
• Designed to work with the range/oven ignition components it connects to

• One spark switch harness

• Disconnect electrical power to the appliance before inspecting or replacing the harness
• Shut off gas supply when working on gas ignition components
• Handle connectors and wiring gently; ensure all connections are fully seated and routed clear of heat or moving parts
• After installation, restore power and test ignition from each burner/oven function to proper operation

This is a genuine replacement screw used to secure appliance components. It provides a simple, reliable fastener for reattaching panels, brackets, or assemblies so parts stay properly mounted and stable during operation. What it does

• Secures panels, trim, brackets or small assemblies in place
• Restores proper fastening where a missing or damaged screw causes loose parts or rattling
• Prevents movement that can lead to noise or misalignment of adjacent components
• Used wherever the original screw was removed or lost during repairs

• One replacement screw

• Use the matching screw head and thread engagement; do not force if it does not seat smoothly
• Tighten until snug—avoid overtightening to prevent stripping or cracking plastic parts
• Disconnect power before working on electrical appliances and follow basic safety precautions
• If original screw was rusted, check mating threads for damage before installing new fastener

This switch seal is a replacement gasket that helps keep moisture and debris away from the appliance's door/control switch, protecting the switch assembly and helping restore reliable door detection and operation. What it does:

• Seals the area around the door/control switch to block water, lint, and grime.
• Helps prevent intermittent trips or failures caused by moisture or foreign material contacting the switch.
• Promotes consistent switch actuation and can extend the service life of the switch assembly.
• Useful when the existing seal is cracked, torn, flattened, or missing.

• Disconnect power before servicing to avoid electrical shock.
• Access typically requires removing the door trim or control panel—follow your model's service instructions.
• Inspect the switch and surrounding area for damage or corrosion and clean before installing the new seal.

This utility drawer assembly replaces a damaged or worn storage drawer found under many ranges and wall ovens, restoring safe, accessible storage for cookware and baking sheets. Durable design keeps items organized and out of the way. What it does:

• Provides a storage drawer that slides out for easy access to pans, baking sheets and oven accessories
• Replaces cracked, bent or broken drawer panels and worn slide surfaces
• Restores smooth drawer operation when the original drawer is sagging or sticking
• Helps prevent items from falling or catching when opening/closing the drawer

• Disconnect power to the appliance before any service; allow unit to cool completely.
• Remove the old drawer by supporting it, releasing any retaining clips or screws, and sliding it out.
• Align the replacement drawer with the guides, engage slides, and secure hardware as required.
• Test drawer operation and make sure it opens and closes smoothly; follow OEM instructions for any trim or fastening steps.

This replacement screw secures appliance panels and components to keep parts aligned and stable. Use it to replace missing or damaged fasteners that cause loose trim, rattling, or unsecured panels for safer, quieter operation. What it does:

• Fastens panels, brackets, trim pieces, or small components in place
• Restores proper alignment and stops vibration or rattling caused by loose hardware
• Replaces stripped, corroded, or missing screws to prevent parts from shifting or falling
• Compatible where the OEM lists part W11244557 as the required fastener

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but avoid over-tightening, which can strip threads or crack parts
• Replace like-for-like; length before installing

The RESERVOIR STEAM RACK is an OEM part specifically designed for Whirlpool ranges. This steam rack reservoir serves as a key component, allowing moisture to be released into the oven during cooking to maintain optimal moisture levels and improve food texture.

A damaged or malfunctioning steam rack reservoir can compromise the oven's ability to regulate moisture effectively. Causes of a faulty reservoir might include cracks, wear, or damage due to prolonged use or exposure to high temperatures.

Symptoms of a defective RESERVOIR STEAM RACK may include:

• Inability to maintain proper moisture levels during cooking
• Visible signs of damage or wear on the reservoir
• Reduced performance in food texture or moisture retention while cooking

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

This replacement orifice holder secures the burner orifice to the gas valve so fuel is delivered correctly to the burner assembly. It restores stable gas flow and proper burner operation in compatible gas appliances. What it does:

• Holds the burner orifice in place on the gas valve or burner tube
• Helps maintain correct fuel flow for consistent burner flames
• Works as a direct-fit replacement for the original factory-mounted orifice holder

• One orifice holder

• Turn off the appliance and shut off the gas supply before beginning work
• Disconnect power to the appliance if electrical components are present
• Use proper tools and follow the appliance manufacturer's service instructions

This flat washer is a direct-replacement fastening washer that restores proper spacing and fastening for appliance panels and components. It helps re-secure loose hardware so assemblies sit and operate as intended. What it does:

• Provides a smooth bearing surface for bolts and screws to distribute load
• Helps keep fasteners tight to prevent wobble or loose panels
• Restores correct spacing and alignment between mating parts
• Can reduce vibration-related noise when worn or missing

• One replacement flat washer

• Disconnect power and water before starting repairs
• Use the correct size socket or driver to remove and reinstall fasteners
• Inspect mating fastener and surrounding parts for wear; replace if damaged
• Tighten hardware securely but avoid overtightening which can deform the washer

This broil burner assembly supplies the focused heat for the oven's broiling function so you can brown and crisp foods quickly. It replaces a worn or damaged broil burner to restore proper broil performance. What it does:

• Directs and emits the high, concentrated flame used during oven broiling.
• Restores even browning and searing when the broil function produces weak or spotty heat.
• Addresses issues such as little/no broil flame or uneven broiling when burner damage or clogging is present.
• Works with the oven's gas supply and ignition system to produce consistent broil heat.

• One broil burner assembly

• Turn off and disconnect gas supply and electrical power before attempting service.
• Follow OEM service manual or parts diagram for correct alignment and secure mounting.
• Use proper tools; verify gas connections are leak-free and ignition lights properly before use.

This oven bake element replaces a failed or damaged heating element to restore even baking heat. It mounts inside the oven cavity and provides the high-temperature heat source used during bake cycles. What it does:

• Heats the oven cavity during bake cycles so the oven reaches and maintains baking temperatures
• Common symptom fix: no heat or oven not reaching set temperature
• Common symptom fix: element is visibly broken, burnt, or arcing
• Works with the oven's internal controls and thermostats to produce consistent bake performance

• One bake (oven) heating element

• Disconnect power to the appliance before starting work to avoid electric shock
• Allow the oven to cool completely before handling the old element
• Support the element while removing mounting screws and disconnecting wires; note wire location for reassembly
• After installation, restore power and test the oven on a low bake setting to confirm correct operation

This heat shield protects oven cavity components from direct heat and helps maintain correct temperature distribution for reliable cooking. It replaces a damaged or warped shield to help prevent heat-related wear. What it does:

• Deflects and disperses radiant heat away from sensitive panels and wiring.
• Helps maintain even internal oven temperatures for consistent cooking.
• Prevents heat damage to insulation, wiring, and nearby components.
• Common symptom: visible warping, burn marks, or a detached/damaged shield.

• Disconnect power (and gas if applicable) before starting any repair.
• Wear gloves to protect against sharp edges and hot surfaces.
• Reinstall using the original fasteners; verify proper alignment and clearance.
• Follow the appliance manufacturer's instructions and diagrams for safe, correct installation.

This clip is a small mounting retainer used to secure panels, harnesses, or trim pieces on compatible Whirlpool appliances. It provides a simple, reliable hold to keep components in place and prevent rattles or shifting during use. What it does:

• Secures plastic panels, trim, or wire harnesses to the appliance frame
• Helps prevent vibration noise by holding parts tight
• Keeps wiring and small components routed and out of the way
• Simple mechanical retention—no tools-specific hardware required for the clip itself

• One clip

• Disconnect power (and water, if applicable) before beginning any repair
• Inspect surrounding parts and alignment before installing the clip to avoid forcing it
• Use appropriate hand tools to remove panels or fasteners as needed; press clip into place until it snaps securely
• If the clip is brittle or broken, replace it rather than reusing damaged pieces

This grate kit replaces damaged or worn cooktop grates to restore stable support for pots and pans and keep burners working as intended. It helps maintain safe, even cooking and improves stove appearance. What it does:

• Provides a stable surface for cookware so pots and pans sit level over burners
• Directs heat and maintains correct clearance between flame and cookware
• Replaces cracked, chipped, rusted, or warped grates that can cause wobble or instability
• Helps prevent cookware from sliding and reduces hot spots from uneven grates

• One grate kit as shown

• Turn off gas and power to the appliance and allow all surfaces to cool before servicing
• Lift old grates off the cooktop; no tools are typically required for removal or placement
• Inspect burners and caps for damage or alignment before installing new grates

The Trim Vent is an OEM component specifically designed for Whirlpool gas ranges. Located at the rear of the unit above the oven cavity, the trim vent serves an important safety and ventilation purpose. 

Constructed of heat-resistant sheet metal with a powder-coated finish, the trim-vent features an internal layered baffle system and a rear-mounted exhaust fan. This facilitates the extraction of hot oven emissions and fumes up and out of the kitchen space. 

This exhaust vent adheres to all codes and regulations regarding temperature ratings and venting performance. It attaches securely to the framework of the gas range with mounting brackets.

Symptoms of a bad trim-vent include:

• Excessive heat or smoke escaping from the oven cavity 
• Improper venting of emissions leads to buildup of residue
• Detached, bent, or corroded vent body

Color: Black

This OEM part is also compatible with KitchenAid, Jenn-Air, Amana, Kenmore, and select GE gas range models.

This replacement bumper cushions and protects the appliance door or panel, helping stop metal-on-metal contact, reduce noise, and prevent chipping or wear. Simple, low-profile part that restores smooth, quiet door operation. What it does:

• Cushions door or panel to prevent hard impacts and protect finishes
• Reduces rattling and vibration-related noise during operation
• Helps the door close more softly and sit flush with the cabinet
• Prevents premature wear where edges contact the cabinet

• Disconnect power to the appliance before starting any repair.
• Inspect the damaged bumper and surrounding area, then remove the old bumper by hand or with a non-marring tool.
• Press the new bumper into the original mounting location until fully seated; no special tools normally required.
• If the bumper mounts to a clip or bracket that's damaged, replace the bracket.