Ksif29pbms00 Parts

The Display Board is an OEM component specifically designed for Whirlpool ranges. It is the interface that provides users control over critical range functions like temperature, timers, and cooking modes through an integrated screen and buttons.

Symptoms of a bad display board include:

• Frozen or unresponsive touch controls  
• Dimmed or flickering screen backlighting
• Inability to properly adjust temperature settings

Common causes are related to heat exposure fatiguing sensitive electronic components over time. Water intrusion from steam or spills can also damage circuitry. 

This OEM replacement display board directly replaces the original, fully restoring the range's interactive programming features. Compatible models include those from brands such as Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge and Roper. 

The Power Cord is an OEM part for Whirlpool ranges. It transmits electrical power from the home's outlet to the range, allowing it to function properly. As the power conduit, the cord is essential for powering burners, oven functions, and electronic controls. 

Symptoms of a bad power cord include:

• Range not receiving power or not powering on
• Loose, frayed, or damaged appearance of the cord
• Tripped circuit breakers related to the range circuit
• Shock or electrical hazards near the range outlet

Causes of a bad power cord can be normal wear and tear over time, accidental cuts or punctures, bending fatigue from improper storage, or damage from heat if placed too close to the range top.

This OEM replacement cord from Whirlpool ensures safe, reliable power to your range. It is compatible with select models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Admiral.

This oven temperature sensor measures internal oven temperature so the control can maintain accurate cooking heat. Replacing a failed sensor restores proper temperature regulation and consistent baking and roasting results. What it does:

• Senses oven cavity temperature and sends a signal to the control board
• Helps the oven reach and maintain set temperatures for consistent cooking
• Common symptom: oven not heating to set temperature or runs too hot/too cold
• May also cause oven error codes or cycling on and off frequently

• One oven temperature sensor probe

• Disconnect power at the breaker before removing or installing the sensor
• Handle the probe gently; avoid kinking or crushing the sensing element or damaging the connector
• Route wires and secure mounting so the sensor sits in its original position inside the oven cavity

This replacement door seal restores the fridge door's airtight closure to help maintain proper cooling and reduce energy loss. Designed to fit original-style openings, it keeps cold air in and warm air out for reliable food preservation. What it does:

• Creates an airtight seal along the refrigerator door edge to maintain consistent interior temperatures
• Helps prevent frost buildup and reduces strain on the compressor by improving efficiency
• Addresses common symptoms like warm spots near the door, excess frost, or a door that won't close snugly
• Fits into the door channel and compresses when the door is closed to form a tight barrier

• Replacement may require door removal and trim manipulation; follow your model's service instructions
• Inspect the door channel and mounting flange for damage or debris before installing the new seal
• Warm the seal slightly to ease installation and ensure a uniform fit; avoid open flames or excessive heat
• Test the door for a consistent seal after installation and make any hinge/strike adjustments if needed

This is a standard oven rack that supports cookware and pans inside the oven, restoring a stable cooking surface for baking, roasting, and broiling. What it does

• Provides a durable shelf for pots, pans and baking sheets
• Slides into the oven's rack supports to position cookware at the correct cooking height
• Replaces bent, warped, or missing racks that cause uneven cooking or tipping
• Compatible with typical slide-in and drop-in rack support systems

• One oven rack

• Install by sliding the rack into the oven's existing rack supports until fully seated
• Make sure the rack is oriented correctly (top/bottom) per your oven's rack guides
• Always let the oven cool before removing or installing the rack and use oven mitts when handling hot racks
• Clean with non-abrasive cleaners; avoid steel wool or harsh chemicals that can damage the finish

The Display Board is an OEM part for Whirlpool ranges. It is responsible for controlling and displaying critical functions like time, temperature, cycle settings, and error codes. 

Causes of a bad display board can include water damage, power surges that overwhelm built-in protection, or general component failure over time. 

Symptoms of a bad display board include:

• Blank or unresponsive display 
• Inaccurate temperature readings
• Inability to set functions from the control panel
• Constant error code display

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This front mounting bracket secures the appliance's front panel and helps keep the cabinet and components aligned for stable operation. A direct-fit replacement that restores proper panel fit and reduces vibration or rattling. What it does

• Secures the front panel or trim to the cabinet to maintain alignment and prevent gaps.
• Keeps adjacent components from shifting, helping reduce vibration and noise.
• Commonly replaces cracked, bent, or missing brackets that cause loose or misaligned panels.
• Helps restore correct door/panel fit and smooth operation of attached controls or trim.

• One front mounting bracket

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the front panel or trim—keep screws and fasteners organized.
• Inspect mating surfaces and existing fasteners; replace any damaged screws or clips.

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and support. Designed to replace damaged or missing brackets, it helps reduce vibration and prevent parts from shifting during use. What it does

• Provides a stable anchor point for internal components or panels
• Restores proper alignment and fit between the appliance cabinet and mounted parts
• Helps reduce vibration and rattling caused by loose or broken supports
• Commonly replaced when bracket is bent, cracked, or missing

• Inspect adjacent fasteners and mounting holes; replace any stripped screws or damaged hardware
• Use appropriate tools and mounting hardware for secure installation; torque to OEM recommendation if available
• Disconnect power before working on electrical appliances and follow all safety guidelines

This replacement drawer slide restores smooth, stable movement for a refrigerator/freezer drawer. It helps the drawer open and close evenly and prevents sticking or sagging so stored items remain accessible and secure. What it does:

• Guides the drawer along its track for reliable, linear motion
• Supports drawer weight to prevent sagging or uneven travel
• Reduces sticking, jamming, or rough movement when opening/closing
• Helps drawer stay aligned and seat properly in the cabinet

• One drawer slide

• Designed to mount to the drawer/cabinet; verify left/right position before installation
• Use existing mounting hardware when possible; replace stripped or damaged screws
• Turn power off and remove food from the drawer area if working near electrical components or lights

This left-side slide drawer replaces a worn or damaged refrigerator drawer slide to restore smooth, stable opening and reliable support for the drawer. Designed to match the OEM fit and function for compatible Whirlpool refrigerators. What it does:

• Guides and supports the left refrigerator drawer for even, smooth movement.
• Replaces bent, broken or worn left-side slide assemblies to stop sagging or sticking.
• Reduces rubbing, scraping or catching when opening and closing the drawer.
• Helps restore proper drawer alignment and prevents uneven wear on the drawer edge.

• Disconnect power to the appliance before beginning repairs and remove food/items from the drawer.
• Remove the old slide per the freezer/refrigerator drawer removal steps; retain fasteners if re-using.
• Align the new slide with mounting points and secure with recommended screws; avoid over-tightening.
• Test drawer movement and adjust alignment as needed; stop and reassess if binding occurs.

This wire cover protects and organizes electrical wiring on the appliance, helping prevent wear and snagging while keeping wires routed neatly for reliable operation. Fits as the OEM replacement protective cover for the wire harness. What it does:

• Shields wiring from abrasion and contact with sharp edges or moving parts
• Helps keep harnesses routed to prevent pinching or rubbing that can cause electrical faults
• Supports safer access during service by holding wires in place
• Reduces vibration-related wear on nearby wires and connectors

• One wire cover

• Install on the appliance where the harness is routed; secure using existing clips or fasteners
• Disconnect power before beginning any repair to avoid shock or short circuits
• Inspect surrounding wires and connectors for damage; replace any worn wiring before reassembly