Ksm150ps0b Parts

This insert is a small, model-specific fitting that seats inside its assembly to align and secure the mating component. Replacing a cracked or missing insert restores a tight fit, correct positioning, and smooth operation.

• Provides the alignment/seating interface within the related assembly
• Helps the attached part fasten and sit properly
• Restores correct spacing and positioning for smooth operation
• Symptoms include a missing/broken insert, loose or wobbly component, difficulty securing or closing, or visible gap/misalignment

• Unplug the appliance and shut off water/gas before service
• Refer to your model's parts diagram for exact placement and orientation
• Transfer/reuse any original screws, clips, or fasteners as required
• Do not overtighten; confirm alignment and test operation afterward

This screw fastens appliance components to keep them aligned and quiet. Replace a stripped, corroded, or missing screw to restore a solid hold and reduce vibration.

• Secures panels, brackets, and other parts as specified in your model's parts diagram
• Maintains alignment and overall structural stability
• Helps reduce vibration, rattling, and loosening over time
• Typical replacement when the original screw is stripped, lost, corroded, or broken

• Disconnect power and shut off gas/water supplies if applicable before servicing
• Match length and thread to the original location; replace like-for-like per your diagram
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• If the receiving threads are damaged, repair or replace the mating part before installation; transfer any original spacers or washers if present

This replacement screw is a direct-fit fastener used to secure appliance panels and components, restoring proper fit and reducing movement. Ideal when original screws are stripped, missing, or damaged. What it does:

• Secures panels, trim, brackets, and other serviceable components to prevent rattling or misalignment
• Matches original fastener form for correct fit and reliable function
• Helps restore proper clearance and component alignment after repair
• Safe, general-purpose replacement for common appliance fastening needs

• Turn off power and disconnect the appliance before accessing internal components
• Use the correct screwdriver or bit; avoid overtightening to prevent thread or part damage
• Keep hardware and small parts away from children and pets

A factory-matched Almond crème touch-up paint bottle to restore small chips, scratches, and worn spots on Almond-finish appliances. Helps blend blemishes into surrounding finish for a cleaner, more consistent look. What it does:

• Provides color-matched coverage for small surface chips and scratches on Almond-finish appliances
• Restores appearance without replacing large panels or trim
• Helps hide everyday wear and minor cosmetic damage
• Dries to a durable finish that blends with factory color

• One (1) bottle of Almond crème touch-up paint

• Shake well before use and test on an inconspicuous area first
• Clean and dry the surface thoroughly; remove loose paint and grease
• Apply sparingly in thin coats, allowing recommended drying time between coats
• Use in a well-ventilated area and follow all safety label instructions; wear gloves and eye protection

This Almond Creme color finish panel restores the original look of your appliance where the finish is worn, scratched, or mismatched. It provides a factory-style color match to keep the exterior appearance consistent. What it does:

• Replaces damaged or discolored finish panels to restore appliance appearance
• Covers scratches, chips, and worn paint on the affected area
• Matches the Almond Creme factory color to maintain a cohesive look
• Helps maintain resale value and overall visual condition

• Disconnect power to the appliance before beginning any work
• Handle panel carefully to avoid scratching the finish during installation
• Align tabs and mounting points, then secure with existing fasteners as required

This planetary gear assembly drives the washer's agitator/spin mechanism to transfer motor motion into drum movement, restoring smooth agitation and spin action. Designed to fit as the washer's internal gearing component for reliable operation. What it does:

• Converts motor rotation into the agitator/drum motion for effective washing and spinning
• Replaces worn or damaged gears that can cause noisy operation or grinding sounds
• Helps correct slow, intermittent, or no-agitation and no-spin symptoms when gearbox failure is present
• Works as the internal gearset that mates with the transmission/agitator components

• One planetary gear assembly

• Disconnect power and water before beginning any repair
• Requires partial disassembly of the washer cabinet and access to the transmission/agitator area
• Inspect related parts (agitator, drive coupling, transmission) for wear and replace as needed

This cap fits over the brush holder to protect and secure the motor brushes, helping maintain proper brush alignment and motor contact. Replaces a worn or damaged cap to restore reliable motor brush seating and protection. What it does:

• Covers and secures the motor brush holder to keep brushes properly positioned
• Helps prevent debris from interfering with brush contact and motor operation
• Used when the cap is cracked, broken, or missing and brush retention is compromised
• Can reduce intermittent motor stopping or rough operation caused by loose brushes

• Disconnect power before starting any repair to avoid electrical shock
• Remove the appliance access panel to reach the motor brush assembly; handle components carefully
• Inspect brushes and springs while replacing the cap; replace brushes if excessively worn

This motor housing is the outer mounting component that secures and protects the appliance motor, helping keep the motor aligned and reducing vibration for quieter operation. Choose the correct color/finish variant for your unit. What it does:

• Provides a stable mounting point for the motor to prevent misalignment and excessive movement
• Protects the motor from debris and contact with adjacent parts
• Helps reduce motor vibration and related noise during operation
• Used to restore proper motor positioning when worn, cracked, or bent housing causes rubbing or abnormal sounds

• One motor housing (color/finish depends on selected variant)

• Disconnect power before beginning service; follow all safety warnings for your appliance
• Basic disassembly (cabinet/drum removal) is typically required to access and replace the housing
• Inspect mounting hardware and gaskets; replace any damaged fasteners or seals as needed
• If symptoms persist after replacement (noise, rubbing, excessive vibration), check motor mounts, blower, and alignment

This white hub cover replaces a cracked or missing wash-tub hub cap to restore the washer's finished appearance and protect the hub hardware from debris. It snaps into place for a clean center finish. What it does:

• Covers the center hub and fastener to prevent dirt buildup and reduce corrosion risk
• Restores the washer's cosmetic appearance when the original cap is cracked or missing
• Helps prevent items from catching on the exposed hub during load rotation
• Common symptom: visible broken or missing center cap, exposed bolt or hub

• One white hub cover

• Disconnect power to the appliance before attempting any repair
• This part typically snaps onto the hub; inspect the hub and surrounding components for damage and replace other parts as needed
• Use only the exact replacement part number to ensure proper fit

This grille housing assembly replaces the front grille frame to restore appearance and proper airflow around the appliance. The Almond creme finish matches cabinets and trim for a factory-fit look. What it does:

• Replaces a cracked, warped, or discolored front grille housing
• Restores correct airflow and alignment of the lower/front access area
• Helps prevent debris from entering internal components behind the grille
• Returns the appliance to a uniform Almond creme exterior appearance

• One grille housing assembly in Almond creme finish

• Install requires removing the lower access/grille area; keep panels and fasteners organized
• Handle the replacement part gently to avoid scratching the finish
• Disconnect power to the appliance before beginning work to avoid injury