Ksm50ppwh Parts

This Trim Band is the outer-facing trim piece that restores the finished edge and appearance of the appliance door or opening. It replaces bent, cracked, or missing trim to help the appliance look and seal properly. What it does:

• Covers and protects the outer edge of the door/opening for a finished look
• Restores proper alignment where bent or damaged trim prevents a snug fit
• Helps prevent dirt and moisture intrusion at the door edge
• Addresses visual damage such as dents, cracks, or peeling finish

• One Trim Band as shown

• Disconnect power (and gas if applicable) before starting any repair
• Handle edges carefully—trim parts can be sharp
• Use basic hand tools; for detailed instructions

This bearing bracket assembly mounts to the appliance frame and supports a moving mechanism so it slides or pivots smoothly. Replacing a worn bracket restores proper alignment and motion, reducing friction, noise, sticking, and uneven travel.

• Provides a fixed mounting point with an integrated bearing surface for smooth movement
• Keeps the attached component aligned to prevent wobble, binding, and scraping
• Wear or damage can cause rough travel, sticking, squeaking, or sagging
• Cracks, deformation, or a loose fit are common signs the bracket needs replacement

• Disconnect power (and shut off gas, if applicable) and allow the appliance to cool before servicing
• Note the original bracket's location and orientation before removal
• Save and reuse the existing mounting screws/clips
• After installation, operate the mechanism to ensure smooth, unobstructed travel

This planetary gear assembly transfers motor motion to the appliance's drive mechanism, restoring smooth rotation and normal operation. It replaces a worn or damaged planetary component to reduce noise and restore consistent drive performance. What it does:

• Transfers motor torque through the gear train to the driven component for proper operation
• Replaces worn or damaged gears that can cause grinding, clunking, or loss of drive
• Helps stop intermittent or failed agitation/spin caused by stripped or broken gear teeth
• Restores correct gear engagement to reduce excessive noise during operation

• One planetary gear assembly

• Disconnect power and water before starting any repair
• Some disassembly of the gearcase or transmission may be required; follow the OEM service manual
• Inspect surrounding seals, bearings, and fasteners; replace any damaged components
• Use proper tools and torque values

This threaded nut is a genuine fastener used to secure appliance components and restore proper attachment. It replaces worn or missing hardware to stop loose parts and help the appliance function safely. What it does:

• Secures panels, brackets, and assemblies to prevent rattling or movement
• Restores proper thread engagement for stable mechanical connections
• Prevents components from working loose during operation
• Useful when replacing stripped or missing nuts that cause vibration or misalignment

• Disconnect power to the appliance before beginning any repair
• Match nut thread size and type to the mating bolt or stud before installation
• Tighten with the correct socket or wrench; avoid over-tightening which can strip threads
• Replace any damaged mating hardware for a secure fit

This pin guard is a small replacement guard that protects and secures a hinge or pivot pin on compatible Whirlpool appliances, helping the door or drawer operate smoothly and stay aligned. It prevents metal-on-metal wear and keeps the pin seated. What it does:

• Covers and protects a hinge/pivot pin from wear and damage
• Keeps a hinge pin seated to reduce door/drawer wobble or misalignment
• Helps minimize noise from a loose or rubbing hinge
• Commonly replaced when a guard is cracked, broken, or missing

• One pin guard

• High-level replacement—usually snaps or slides onto the hinge/pin; no special tools typically required
• Disconnect power (and water if applicable) before working near electrical or water connections
• Inspect the hinge pin and surrounding parts; replace damaged pins or fasteners as needed for a secure fit

Color: Onyx black

This rod-lift is the replacement lift rod that secures and positions moving components in select Whirlpool laundry appliances, restoring proper motion and reducing noise from loose or broken linkage. Designed to match OEM fit and function. What it does:

• Replaces a worn, bent, or broken lift rod that can cause misalignment or noisy operation
• Restores correct linkage movement for consistent door/drum/cabinet motion
• Helps prevent further stress on connected components by re-establishing proper support
• Commonly used when you see excessive play, scraping, or intermittent operation in the affected assembly

• One rod-lift replacement part

• Disconnect power (and water, if applicable) before servicing the appliance
• Follow the OEM service manual for disassembly and reassembly steps specific to your model
• Use basic hand tools; avoid forcing parts to prevent breakage

Color: Almond creme

This is a genuine screw used to secure appliance components that require a 10-24 fastener. It provides a reliable hold for panels, brackets, and assemblies where a coarse 10-24 thread is specified. What it does

• Fastens panels, brackets, and small assemblies that use 10-24 threaded holes
• Replaces worn, stripped, or missing screws to restore secure mounting
• Helps stop vibration-related noise and movement when proper fastening is restored
• Used in locations where a standard 10-24 coarse-thread screw is required

• Use the correct driver size and turn slowly to avoid stripping the head or threads
• Do not overtighten; stop when the part is snug and secure to avoid cracking plastic or deforming metal
• If reinstalling into worn or damaged threads, consider using a repair insert or alternate mounting method
• Disconnect power and follow appliance safety guidance before accessing internal components

This screw is a factory-style fastener used to secure panels and components in compatible Whirlpool appliances. It restores proper fit and function when the original screw is missing, stripped, or damaged. What it does

• Secures appliance panels, brackets, or small components to prevent rattling and maintain alignment.
• Replaces stripped, corroded, or lost screws to restore a tight, reliable connection.
• Helps eliminate vibration-related noise caused by loose fasteners.
• Fits the original mounting locations where the OEM screw was specified.

• One screw

• Use the correct screwdriver or bit to avoid stripping the head; match thread and length to the original.
• Tighten until snug—do not over-torque to prevent damage to threads or surrounding parts.
• Disconnect power to the appliance before accessing internal components for safety.

This cover is a replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while maintaining a clean, finished look. What it does:

• Shields control components and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a finished appearance
• Helps maintain proper airflow and component clearance by covering openings
• Can reduce rattles or vibration by replacing a loose or broken panel

• One replacement cover

• Disconnect power (and gas or water if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for specific steps
• Handle edges carefully; align tabs/fasteners before securing to avoid damage
• Replace worn fasteners or clips to ensure a secure fit

This gearcase housing is the molded outer case that supports and protects the washer transmission/gearcase assembly, keeping internal gears aligned for reliable spin and agitation performance. What it does

• Replaces a cracked, broken or warped gearcase outer housing that can cause gearbox misalignment
• Restores correct mounting and support for the transmission and related internal gears
• Helps stop wobbling, grinding noises or agitation/spin issues caused by a damaged housing
• Preserves seals and internal components by providing correct enclosure and alignment

• Inspect surrounding seals, fasteners and the gearcase for wear while replacing the housing
• Disconnect power and water supply before beginning work; drain tub and follow manufacturer safety procedures
• Use correct fasteners and torque per OEM specifications to avoid leaks or misalignment