Kssc48fms00 Kitchenaid Icemaker Parts

Secures and guides your refrigerator door for smooth operation and proper alignment. Replace when door sags, misaligns, or won't seal tightly. Confirm fit with your model number before ordering.

This is a crisper pan that slides into the fresh food compartment of the refrigerator to store fruits and vegetables in a controlled-humidity environment. It helps keep produce fresh by retaining moisture. Replace this drawer if it is cracked, warped, or broken, which can affect humidity control and allow produce to dry out or spoil prematurely.

Positions and secures the interior light mechanism for proper door-activated lighting. Replace if light fails to turn on when door opens. Verify fit with your model.

This insul-sound deadening pad reduces vibration and noise by dampening panels and components in laundry and kitchen appliances. It's a small adhesive-backed sound/isolation pad used where noise or rattles transfer through metal surfaces. What it does

• Dampens rattles and reduces structure-borne noise from panels, cabinets and housings.
• Helps isolate vibrating components from appliance chassis to lower perceived sound.
• Commonly applied behind control panels, cabinet walls or on motor mounts to cut vibration transmission.
• Useful when worn, detached or hardened factory pads allow increased noise.

• One insul-sound deadening pad

• Disconnect power before servicing an appliance to avoid shock or injury.
• Clean and dry mounting surface; press pad firmly to ensure adhesive contact.
• Replace only in the original location; do not cover vents or moving parts.
• If adhesive is weak, use OEM-approved adhesive; avoid solvents that may damage finishes.

Replacement ice door spacer for side-by-side refrigerators. This plastic spacer maintains proper alignment of the ice dispenser door assembly.

This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.

• Holds the thermostat firmly against the evaporator line for proper temperature feedback
• Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
• Restores correct mounting when the original clip is cracked, bent, or missing
• Common signs include a broken clip or a thermostat not attached to the coil

• Disconnect power to the appliance before servicing; wear cut-resistant gloves
• Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
• Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
• Confirm a secure fit and proper wire routing before reassembling and restoring power

This is a gallon-sized cantilever door bin that mounts on the inside of the refrigerator door to hold bottles, cartons, and other items. It slides onto the door liner rails and is held in place by integrated clips. Replace this bin if it is cracked, warped, or if the mounting clips have broken, causing the bin to sag or fall off the door.

Rubber grommet kit that mounts and cushions the compressor. Replace worn, cracked, or damaged grommets to restore proper support and isolation.

Ice cubes stuck in tray and won't eject? This ejector arm pushes ice from the mold into the bin. Simple snap-in install restores ice production.

Replacement mounting screw for refrigerators. Secures panels, trim pieces, and small assemblies. Needed when original screw is missing or damaged.

This is the front door panel that covers the ice maker compartment inside the refrigerator. It encloses the ice storage area and helps maintain proper temperature for ice production. Replace this part if it is cracked, warped, missing, or no longer seals properly against the compartment opening.

Left hand side

This user control and display board manages the electronic functions and shows status information for your appliance's advanced features. The board processes user inputs and displays settings, timers, and operational status on a digital screen. Replace this board if the display shows garbled text, buttons don't respond properly, or if certain programmed functions stop working correctly.

This small metal mounting clip secures the thermal fuse in place to maintain proper thermal contact and stable wiring. It helps keep the fuse positioned so the appliance can monitor temperature reliably and operate safely. What it does:

• Secures the thermal fuse to the appliance housing or duct to prevent movement
• Keeps the fuse in correct contact with temperature-sensing surfaces
• Helps prevent intermittent heating or thermal-sensor misreads caused by a loose fuse
• Useful when replacing a damaged or missing fuse retainer during fuse service

• One thermal fuse mounting clip

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove access panels per your model's service instructions to reach the fuse location
• Install clip in the same orientation as the original; use pliers if needed to seat it firmly
• Inspect the thermal fuse and wiring while installing; replace any damaged components per OEM guidance

Support base bracket for side-by-side refrigerators. Mounts on the front left side to provide structural support. Replace if cracked or broken.