Kuiix305ess Parts

The Ice Maker Recirculating Pump is an OEM component specifically designed for Whirlpool refrigerators with icemakers. The recirculating pump works to move water from the inlet valve to the ice mold cavity where it then freezes into ice cubes. It is a crucial part that allows for the continuous production of ice.

Symptoms of a bad recirculating pump include:

• Slow or reduced ice production  
• Ice cubes form in clumps or clusters rather than individual cubes
• Water not filling the ice molds properly
• Leaking or flooding from the freezer door or ice maker area

This genuine OEM Whirlpool replacement pump is also compatible with models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Bracket-Pump,Recirc is an OEM part for Whirlpool ice machines. This bracket ensures that the pump is properly aligned and secured, facilitating the efficient circulation of water needed to produce ice.  

Causes of a malfunctioning Bracket-Pump,Recirc may include:

• Corrosion due to prolonged exposure to water and chemicals, leading to material degradation.
• Physical damage, which can occur during cleaning or maintenance activities.
• Wear and tear over time, which is natural for mechanical components but can lead to loss of structural integrity.

Symptoms indicating the need for replacement include:

• Excessive vibration or noise from the ice machine, suggesting that the pump is not securely mounted.
• Reduced ice production or inconsistencies in ice quality, which can result from inadequate water circulation.
• Visible damage or wear to the bracket, indicating it can no longer provide proper support.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This condenser fan blade moves air across the refrigerator's condenser coil and compressor to remove heat, helping the unit cool efficiently. Replace a cracked, warped, or loose blade to restore proper airflow and reduce noise.

• Circulates air through the condenser section to dissipate heat from the refrigerant
• Supports stable fridge and freezer temperatures and efficient compressor operation
• Common symptoms: rattling/scraping noises, weak or no airflow at the rear/bottom, longer run times, or warming compartments
• Replace if the blade is cracked, warped, wobbling, or loose on the motor shaft

• Disconnect power and pull the refrigerator away from the wall; remove the rear access panel to reach the condenser fan
• Note the original blade orientation/rotation; remove the old blade from the motor shaft (release any retainer if present)
• Press the new blade onto the shaft until fully seated; ensure it spins freely with proper clearance and airflow direction
• Reinstall the panel, restore power, and verify normal airflow and sound

This transformer assembly converts household AC power to the specific voltage required by the appliance's internal circuits, helping restore stable operation of affected functions. Replace a failed transformer to resolve power delivery issues and prevent repeat fuse or breaker trips. What it does

• Steps voltage up or down to supply proper power to designated circuits
• Delivers stable power to components such as controls, relays, or other loads
• Failure symptoms may include: dead display or no operation, certain features not working, repeated fuse/breaker trips, electrical odor, or abnormal humming

• 1 transformer assembly

• Disconnect power before servicing; capacitors in the appliance can retain a dangerous charge—discharge per the service manual
• Label/photograph wiring and transfer one lead at a time to the new transformer
• Transfer the original mounting hardware/brackets from the old unit
• If a fuse opened, diagnose and correct the underlying cause before reapplying power

This replacement flexible hose routes water between appliance components to restore proper water flow and prevent leaks. It replaces a worn, cracked, or damaged hose to help stop visible leaks and restore normal operation. What it does:

• Carries water to or from the appliance component as part of the unit's plumbing
• Prevents leaks when intact; a cracked or pinched hose can cause water on the floor
• Restores proper water flow if a collapsed or obstructed hose is replaced
• Works with existing clamps and fittings when the original connections are unchanged

• One replacement flexible hose

• Disconnect power and shut off the water supply before starting work
• Drain any residual water from the system to avoid spills when removing the old hose
• Inspect and reuse or replace hose clamps/fittings as needed for a secure seal
• After installation, restore power and water, run a short cycle and check all connections for leaks

This recirculation cover bracket secures the recirculation cover and helps maintain proper positioning of the recirculation components. Replacing a damaged bracket restores secure fit and reduces rattling or loose parts. What it does:

• Holds the recirculation cover in place to prevent shifting during operation
• Keeps internal components aligned for reliable recirculation assembly fit
• Prevents rattling or vibration caused by a cracked or broken bracket
• Helps avoid damage to the cover or nearby components from a loose mount

• Disconnect power to the appliance before beginning any repair
• Remove the access panels necessary to reach the recirculation cover per the service manual
• Replace the bracket using basic hand tools; retain original fasteners unless damaged

This hinge spring is the OEM replacement tension spring that helps support and balance the oven/range door for smooth opening, controlled closing, and proper door positioning. Restores stable door movement and reduces sudden drops. What it does:

• Provides tension to the door hinge so the door opens and closes smoothly
• Helps keep the door in the intended open or partially open position
• Reduces door sag, slipping, or sudden closing
• Can stop noisy or uneven hinge movement caused by a worn spring

• Disconnect power to the appliance before starting any repair.
• Use gloves and eye protection; springs are under tension and can snap back.
• Follow the manufacturer's removal/installation steps — you may need to partially or fully remove the door to access the hinge spring.

This support bracket holds the evaporator/grid assembly in place inside the freezer compartment, helping maintain proper airflow and alignment for consistent cooling. Durable replacement for damaged or missing mounts. What it does:

• Secures the evaporator or evaporator grid to the cabinet to prevent movement and vibration
• Keeps the evaporator properly positioned for even airflow through the freezer
• Helps reduce rattling or noise caused by a loose evaporator assembly
• Can prevent contact that leads to coil damage or improper defrosting

• One support bracket

• Disconnect power to the appliance before beginning any disassembly
• Remove necessary panels and shelving to access the evaporator area; handle the evaporator coil/grid carefully to avoid bending or puncturing
• Reuse existing fasteners when possible; replace any damaged clips or screws with OEM-recommended hardware

This top hinge is the replacement hinge for the ice maker/top-door assembly. It restores proper door alignment and secure mounting so the ice maker door opens and closes smoothly and stays in position. What it does:

• Provides a secure pivot point for the ice maker/top door to open and close
• Restores correct door alignment to prevent binding or rubbing
• Helps stop door sagging or uneven closing that can affect ice access
• Reduces noise or wobble from a worn or broken hinge

• Disconnect power to the appliance before beginning repairs
• Support the door/ice maker assembly while removing the old hinge to avoid dropping or damage
• Use appropriate hand tools and keep fasteners organized for reassembly

This 10-32 x 1/2 inch machine screw (pan head) secures panels, brackets, and components on compatible appliances for a reliable mechanical connection. It replaces missing or damaged mounting screws to restore proper fit and reduce vibration. What it does:

• Fastens chassis panels, mounting brackets, and small components where a 10-32 thread is required
• Restores secure attachment to stop rattling, misalignment, or loose trim
• Provides the correct length and thread engagement for a stable mechanical joint
• Works with metal-to-metal or threaded-inserts commonly used in appliance assemblies

• One 10-32 x 1/2 in. pan-head machine screw (quantity: 1)

• Disconnect power to the appliance before accessing internal panels or components
• Use the correct Phillips or hex driver sized for the pan head to avoid stripping
• Thread carefully into existing threads or a compatible insert; do not force if resistance is unusual
• Tighten snugly but avoid over-torquing to prevent thread damage or strip-out

This clamp secures a flexible appliance hose to prevent leaks and keep connections tight. It provides a simple, corrosion-resistant hold to restore proper water flow and stop drip points at hose joints. What it does:

• Secures a hose to a barb, nipple or fitting to prevent water leaks
• Keeps hose from slipping off during normal use or pressure changes
• Helps stop visible dripping or pooling at the hose connection
• Restores a proper seal when a worn or corroded clamp fails

• Turn off power and shut off water supply before servicing the appliance
• Slide clamp over hose, position on the fitting, then compress or tighten per clamp style
• Replace any hoses or fittings that are cracked or heavily corroded for a reliable repair

The HARNESS is an OEM part for Whirlpool standalone icemakers. As the primary electrical component, the harness powers and connects all wiring to allow the ice maker to function independently outside of a full refrigerator unit. 

Causes of a bad harness can include exposed wires from cuts or abrasions in the insulation over time, damaged or loose connectors, and general wear and tear from constant use. 

Symptoms of issues include:

• Ice maker not producing ice 
• LED display or control panel not lighting up
• Buttons or switches not responding 
• Unusual noises coming from the unit

Replacing the harness ensures proper power delivery and replaces worn components. This OEM Whirlpool part helps restore full operation to keep standalone ice makers producing for years to come. 

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore models.