Kuis15 Parts

The Ice Thermistor Assembly is the temperature sensor your refrigerator uses to monitor the ice maker/ice compartment. Accurate readings help the control time harvests and maintain proper ice room temperature, restoring consistent ice production when the sensor fails. What it does

• Senses temperature at the ice maker/ice compartment and reports to the control
• Helps the control time ice harvests and, on some models, manage ice box airflow
• Can address issues like no ice, intermittent/slow ice production, or ice clumping/melting
• Clear a thermistor-related fault noted in service diagnostics

• One ice thermistor assembly

• Disconnect power before servicing
• Access the ice maker/ice compartment; note original sensor placement and wire routing
• Transfer any clips/insulators if present, connect the new harness, and secure the sensor in the same location
• Restore power and run the unit's ice maker/service test (if available) to operation

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

This drain cap seals the appliance's drain port so water stays contained and the system drains as designed during operation and cleaning. Replace a cracked, stripped, or missing cap to stop leaks and help prevent debris from entering the drain path. What it does:

• Seals the drain opening to prevent leaks and air intrusion
• Helps maintain proper water flow during draining and cleaning
• Keeps debris from entering and clogging the drain
• Common symptoms: puddles under the unit, dripping at the drain area, cap won't tighten, or visible cracks/wear

• 1 drain cap

• Disconnect power and turn off the water supply before servicing
• Place a towel or shallow pan to catch residual water
• Remove the old cap and clean the drain port's sealing surface
• Hand-tighten the new cap until snug; do not overtighten. Restore water and power, then check for leaks.

These inserts are for 1/4 inch plastic tubing. Package of 4.

The Overload is an OEM part for Whirlpool refrigerators. It is an important component of the refrigerator's compressor system, providing protection against electrical overload.

The overload helps safeguard the compressor from excessive electrical currents, preventing potential damage and ensuring the longevity of the refrigerator. It acts as a safety measure by interrupting the power supply to the compressor when necessary.

Causes of a faulty overload can include power surges, excessive heat, or electrical component failure. These factors can lead to the overload not properly regulating the electrical flow, resulting in compressor issues or the refrigerator not cooling effectively.

Symptoms of a bad overload may include:

• The refrigerator not cooling or maintaining the desired temperature
• Unusual noises coming from the compressor
• The compressor not running at all

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This replacement tube routes water between internal components, helping maintain proper flow and reduce leaks. Replacing a cracked, kinked, or brittle tube restores a secure water path and reliable performance. What it does:

• Provides a sealed pathway for water between components
• Helps prevent leaks when tubing is intact and properly seated
• Restores flow lost to kinks, cracks, or mineral buildup
• Common symptoms include visible cracks, leaks, or restricted water flow

• 1 tube

• Unplug the appliance and shut off the water supply before service
• Relieve line pressure and place towels to catch residual water
• Note the original routing; cut ends square and fully seat into fittings
• After installation, restore water and check carefully for leaks before reassembling panels

This water reservoir tube routes chilled water from the refrigerator's internal reservoir to the dispenser line. Replacing a brittle, kinked, or cracked tube restores steady flow and helps stop leaks inside the fresh food compartment.

• Carries water between the reservoir and the dispenser supply path
• Maintains a sealed route to reduce internal leaks and air intrusion
• Damage or kinks can cause slow/no dispensing, intermittent flow, or water pooling near the crisper area
• Fresh tubing helps protect shelves and liners from water damage

• Disconnect power and shut off the household water supply before servicing
• Dispense water to relieve line pressure; place a towel/container to catch residual water
• Note original routing; avoid sharp bends and contact with moving or warm components
• Fully seat the tube into quick-connect fittings; tug gently to confirm it's locked

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

The Ice Maker Scoop is an OEM component specifically designed for Whirlpool ice machines. As an included accessory, it provides a sanitary and convenient way for users to fetch ice from the storage bin.

The scoop is strategically designed with an ergonomic handle and wide opening bowl shape. This facilitates easy scooping and transport of ice cubes without spillage or crumbling. Its food-safe materials maintain hygienic conditions in the storage area. 

Symptoms of a faulty scoop include:

• Cracks or breaks that compromise the scooping surface 
• Leaks or spills of ice when trying to scoop
• Sharp edges that risk cuts or scratches
• Warping or loosening of the handle attachment over time

This OEM Whirlpool scoop is also compatible with some Scotsman and Manitowoc ice machines. Replace yours today to restore safe and hygienic ice retrieval from the storage bin.
 

This screw grommet anchors a screw in thin appliance panels so trim, covers, or consoles stay tight. It provides a snug, vibration-damping fit where a standard screw could loosen or strip over time.

• Creates a captive insert so a screw can securely fasten to sheet metal or plastic panels
• Replaces a worn, cracked, or missing grommet to restore proper screw retention
• Helps reduce panel rattles and movement from vibration
• Typical signs of failure: screw won't tighten, panel or trim feels loose, grommet falls out

• Disconnect power and shut off gas/water as applicable before servicing
• Remove the screw and lift out the old grommet; clear debris from the opening
• Press the new grommet straight into the hole until fully seated and flush
• Reinstall the screw and tighten gently to avoid deforming the grommet

This is the black handle for the icemaker compartment door on compatible refrigerators. It provides a secure grip to open and close the icemaker door, helping you access the ice bin easily and keeping the compartment neatly closed.

• Allows smooth opening/closing of the icemaker door
• Restores a broken, cracked, or missing icemaker door handle
• Helps the icemaker door stay properly secured
• Common symptoms: loose or wobbly handle, broken or missing handle, difficulty accessing ice bin

• Unplug the refrigerator before starting
• Open the icemaker door and remove any retaining screws/clips from the old handle
• Transfer hardware if reusable; align and fasten the new handle securely
• Test door operation to ensure proper fit and closure

The Reservoir Drain Tube is an OEM part for Whirlpool freestanding icemakers. It is responsible for draining melted water from the reservoir during the harvest cycle. This tube removes water to allow for new ice formation. 

Causes of a bad reservoir drain tube can include mineral buildup or blockages within the tube inhibiting proper drainage over time. Additional causes may be cracks, cracks, kinks, or other damage limiting water flow.

Symptoms of a bad reservoir drain tube include:

• Water not draining from the reservoir after harvest
• Excess water collecting in the reservoir 
• Slow or reduced ice production due to poor drainage
• Leaks or water spills around the drain tube area

This OEM Whirlpool replacement tube is also compatible with freestanding ice components manufactured by select Kenmore models. 

Size: 8-18 x 1/2 inch.

This pump wire harness connects the pump to the appliance's power and control wiring, restoring reliable electrical connection for proper draining. Use it to replace damaged, corroded, or disconnected pump wiring that can stop pump operation. What it does:

• Routes power and control signals between the appliance control and the drain pump to enable pump operation.
• Replaces frayed, melted, or disconnected wires and mating connectors that can cause intermittent or no pump activity.
• Addresses common symptoms like a washer that won't drain, pump not running, or visible connector damage.
• Helps prevent arcing from loose connections by restoring secure electrical contacts.

• Disconnect power to the appliance before starting—always follow lockout/tagout safety practices.
• Access the pump per your model's service instructions; note wire routing and connector orientation before removal.
• Match and fully seat each connector; secure the harness away from moving parts and heat sources.