Kusd Parts

This front-and-rear mounting bracket secures the appliance's front and rear assemblies to the cabinet, restoring proper alignment and support. Replacing a worn or damaged bracket helps reduce panel movement, rattling and improper fit. What it does:

• Provides a stable mounting point for the appliance's front and rear assemblies to maintain alignment and cabinet integrity.
• Stops or reduces rattling, vibration and shifting caused by loose or broken mounting hardware.
• Prevents gaps and misalignment that can affect doors, panels or controls.
• Fits original mounting locations to restore factory support.

• Bracket (front and rear)

• Disconnect power (and water if applicable) before starting any repair.
• Use the original fasteners or manufacturer-recommended hardware; do not force or bend the bracket.
• Inspect adjacent mounting points and fasteners for wear; replace any damaged parts.

This is a spacer used in the refrigerator to maintain proper alignment and clearance between components. It helps ensure parts are correctly positioned and securely mounted. Replace this spacer if it is cracked, missing, or if components appear misaligned or loose.

Replacement pump cover for ice makers. Protects the water pump mechanism. Needed when original is cracked, broken, or missing. Ensures proper operation.

Black endcap panel for ice makers. Covers and protects the side edge of your unit. Replace if cracked, broken, or missing for a clean finish.

Replacement fastener nut for securing panels, brackets, and components in various appliances. Needed when original nut is stripped, missing, or corroded.

Foam insulation panel that fits inside refrigerator doors to maintain temperature efficiency. Replace if cracked, compressed, or missing.

This gas valve controls gas flow to the oven or range burners so the appliance lights and maintains a steady flame. Replaces a faulty valve to restore reliable ignition and consistent heating. What it does:

• Regulates gas flow from the supply to the burner manifold for proper combustion
• Allows the oven/range to ignite and hold a steady flame during operation
• Commonly used when burners won't light, flame flickers or won't stay lit, or oven fails to heat
• Works with the appliance's safety controls and thermostat/electronic controls to modulate gas

• One gas valve

• Shut off gas supply and power to the appliance before starting any work
• Installation may require disconnection of gas lines; leak-test all connections after install
• Do not operate if you detect a gas odor—stop work, ventilate area.

This front grille is the exterior trim piece that covers and protects the lower front of an 18-inch built-in ice maker, restoring appearance and allowing proper airflow. It replaces a cracked, faded, or damaged grille to keep the unit looking finished. What it does:

• Covers the ice maker's lower front opening and provides a finished appearance
• Protects internal components from debris while allowing ventilation
• Helps prevent drafts and keeps the trim line sealed and tidy
• Common symptom: grille is cracked, broken, loose, or discolored

• Designed for drop-in or snap-fit replacement at the front of the ice maker;
• Remove power to the appliance and empty nearby ice/water before beginning service
• Use basic hand tools; avoid excessive force to prevent breaking surrounding trim

Black mounting screw for ice maker door handles. Secures handle to door panel. Replace if screw is stripped, missing, or no longer holds handle firmly.

This cover assembly replaces a damaged or missing unit cover to protect internal components and keep wiring and assemblies secure. It restores the appliance's enclosure and helps maintain safe, reliable operation. What it does:

• Protects motors, wiring and internal components from dust, debris and accidental contact
• Helps reduce vibration-related movement of internal parts by keeping assemblies enclosed
• Restores the appliance's outer enclosure to prevent gaps that could allow foreign objects inside
• Addresses symptoms like cracked, broken or missing covers and loose or exposed internal parts

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Remove any obstructing panels or components to access the mounting points for the cover
• Align the cover with factory mounting locations and secure all fasteners; do not force or bend the part

This grid cover is a direct-fit replacement that restores the protective trim and appearance around your appliance's cooktop grid. It keeps the cooktop edge sealed and helps hold the grate area steady during normal use. What it does:

• Covers and protects the outer edge of the cooktop grid to prevent debris from entering gaps.
• Helps maintain proper alignment and stability of the cooktop grate.
• Restores worn, cracked or missing trim for a cleaner, finished look.
• Reduces risk of small items falling into the burner area when the grate is removed.

• Designed for easy swap-out; remove the grate and lift old cover before installing the new cover.
• No special tools typically required; handle carefully to avoid scratching the cooktop surface.
• Disconnect power or ensure burners are cool before working around the cooktop.

Electrical shield for ice makers. Protects wiring and electrical components from moisture and debris. Replace if cracked, damaged, or missing.

Wiring channel for ice makers. Organizes and protects electrical wires inside the unit. Replace if cracked, broken, or missing to secure wiring properly.

Secures power cord to your ice maker or refrigerator. Replace if cracked, broken, or missing to prevent cord damage and ensure safe operation. Verify fit.

Restores your ice maker's front appearance. Replaces scratched, dented, or faded outer door panels. Direct-fit black finish panel installs on the exterior.

This replacement door bin restores inside-door storage on your refrigerator so bottles, condiments and small items stay organized and secure. Durable molded plastic matches the original fit and function. What it does:

• Provides a removable shelf inside the refrigerator door to hold bottles, jars and small containers
• Replaces cracked, broken or missing door storage that no longer secures items
• Restores original storage capacity and prevents items from falling when opening the door
• Fits into existing mounting ledges or rails and snaps into place for everyday use

• Empty contents from the damaged bin before removal
• Most installations are tool-free—lift out the old bin and snap the new one into the door ledges
• Inspect door ledges for damage before installing; replace any broken mounting clips if needed
• Handle carefully to avoid sharp edges on broken plastic and follow safety precautions