Kusi185jbl Parts

The condenser fan motor is an OEM part for Whirlpool refrigerators. It plays a vital role in circulating refrigerant through the condenser coils, facilitating heat exchange and maintaining the refrigerator's cooling efficiency.

Over time, the motor-condenser can wear out or fail due to electrical issues, mechanical wear, or blockages in the condenser system. A malfunctioning motor can compromise the refrigerator's cooling performance, leading to temperature fluctuations and increased energy consumption.

Symptoms of a bad Motor-Condenser include:

• The refrigerator not cooling properly
• Unusual noises coming from the back of the refrigerator
• The compressor running continuously
• Increased energy bills due to inefficient operation
• Overheating of the refrigerator

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wire harness connects the ice maker's cutter grid to the appliance's electrical system, supplying power so the heated grid can slice the ice slab into cubes. Replacing a damaged harness helps restore consistent cube separation and production.

• Routes electrical power to the cutter grid/heating wires
• A failed, loose, or heat-damaged harness may prevent the grid from warming
• Common symptoms may include whole sheets or large chunks in the bin, cubes not separating, or intermittent/slow ice production
• Visual signs can include melted/discolored grid connectors or broken/brittle conductors

• Disconnect power before servicing; allow the cutter grid to cool completely
• Note wiring/connector orientation; transfer one connection at a time to match original routing
• Seat connectors fully and secure the harness in original clips/standoffs away from sharp edges
• After reassembly, restore power and verify the cutter grid warms during a cycle

This front-and-rear mounting bracket secures the appliance's front and rear assemblies to the cabinet, restoring proper alignment and support. Replacing a worn or damaged bracket helps reduce panel movement, rattling and improper fit. What it does:

• Provides a stable mounting point for the appliance's front and rear assemblies to maintain alignment and cabinet integrity.
• Stops or reduces rattling, vibration and shifting caused by loose or broken mounting hardware.
• Prevents gaps and misalignment that can affect doors, panels or controls.
• Fits original mounting locations to restore factory support.

• Bracket (front and rear)

• Disconnect power (and water if applicable) before starting any repair.
• Use the original fasteners or manufacturer-recommended hardware; do not force or bend the bracket.
• Inspect adjacent mounting points and fasteners for wear; replace any damaged parts.

This is a replacement left/right mounting bracket used to secure interior panels or trim and restore proper alignment and fit. It provides a simple fix for loose panels and misalignment without replacing larger assemblies. What it does:

• Secures an interior panel, trim piece, or rail to the appliance cabinet
• Restores proper alignment to reduce rubbing or binding of doors or panels
• Prevents rattling or movement caused by worn or broken brackets
• Helps maintain correct spacing for connected components

• Basic hand tools typically required; refer to your appliance's service manual for the exact procedure
• Disconnect power (and gas if applicable) before beginning any repair to avoid shock or injury
• Keep removed fasteners and parts organized for reassembly; replace any damaged screws

This replacement nut is a basic fastener used to secure components and assemblies on compatible Whirlpool appliances, restoring a tight connection and preventing parts from loosening during use. What it does

• Secures panels, brackets, or components to a stud or bolt to keep assemblies stable
• Prevents rattling, vibration, or movement caused by a loose or missing nut
• Replaces a stripped, corroded, or lost nut to restore proper mechanical connection
• Works with the corresponding bolt or stud as part of the appliance's fastening system

• Disconnect power and water to the appliance and ensure it is stable before starting work
• Thread the nut on by hand first to avoid cross-threading, then tighten with the appropriate sized wrench or socket
• Do not overtighten — torque to the appliance manufacturer's specification when available
• Replace damaged studs or mating hardware if threads are worn or damaged

This gas valve controls gas flow to the oven or range burners so the appliance lights and maintains a steady flame. Replaces a faulty valve to restore reliable ignition and consistent heating. What it does:

• Regulates gas flow from the supply to the burner manifold for proper combustion
• Allows the oven/range to ignite and hold a steady flame during operation
• Commonly used when burners won't light, flame flickers or won't stay lit, or oven fails to heat
• Works with the appliance's safety controls and thermostat/electronic controls to modulate gas

• One gas valve

• Shut off gas supply and power to the appliance before starting any work
• Installation may require disconnection of gas lines; leak-test all connections after install
• Do not operate if you detect a gas odor—stop work, ventilate area.

This cover assembly replaces a damaged or missing unit cover to protect internal components and keep wiring and assemblies secure. It restores the appliance's enclosure and helps maintain safe, reliable operation. What it does:

• Protects motors, wiring and internal components from dust, debris and accidental contact
• Helps reduce vibration-related movement of internal parts by keeping assemblies enclosed
• Restores the appliance's outer enclosure to prevent gaps that could allow foreign objects inside
• Addresses symptoms like cracked, broken or missing covers and loose or exposed internal parts

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Remove any obstructing panels or components to access the mounting points for the cover
• Align the cover with factory mounting locations and secure all fasteners; do not force or bend the part

This grid cover is a direct-fit replacement that restores the protective trim and appearance around your appliance's cooktop grid. It keeps the cooktop edge sealed and helps hold the grate area steady during normal use. What it does:

• Covers and protects the outer edge of the cooktop grid to prevent debris from entering gaps.
• Helps maintain proper alignment and stability of the cooktop grate.
• Restores worn, cracked or missing trim for a cleaner, finished look.
• Reduces risk of small items falling into the burner area when the grate is removed.

• Designed for easy swap-out; remove the grate and lift old cover before installing the new cover.
• No special tools typically required; handle carefully to avoid scratching the cooktop surface.
• Disconnect power or ensure burners are cool before working around the cooktop.