Kxd4636yss Parts

This push-button switch mounts in the control area and completes the circuit when pressed, allowing the appliance to start or change a function. Replacing a worn switch restores reliable button response and consistent operation.

• Closes/opens the electrical circuit when the button is pressed and released
• Helps control on/off or specific functions, depending on the appliance design
• Common symptoms: no response to button presses, intermittent operation, or having to press unusually hard
• Physical signs of failure can include a stuck button, broken tabs, or damaged terminals

• Disconnect power to the appliance before servicing
• Access the control area; note wire locations and terminal markings on the original switch
• Transfer connectors one at a time to the new switch; secure the switch in its bracket or panel
• Reassemble, restore power, and test button operation

Factory screw secures panels and components in your downdraft ventilation system. Replace missing, stripped, or damaged screws to restore tight fit.

This is a metal mesh grease filter designed for a downdraft ventilation system. It captures grease and airborne particles generated during cooking to prevent them from entering the ductwork and blower. Replace this filter if it is visibly clogged with grease buildup, damaged, or if the vent system has reduced airflow or produces odors even after cleaning.

This arm motor powers the dishwasher spray arm, restoring rotation needed for even cleaning and proper water circulation. Replace a failed motor to stop arm stalling or noisy operation and recover normal wash performance. What it does:

• Spins the spray arm so water sprays across dishes for effective cleaning.
• Works with the wash/circulation assembly to maintain proper water flow.
• Common symptoms: spray arm not rotating, uneven cleaning, motor humming or noisy during the wash cycle.
• Replaces worn or failed arm motor that causes intermittent or no rotation.

• Disconnect power to the appliance before beginning any work.
• Handle the motor and mounting hardware carefully; wear gloves and eye protection.
• Verify alignment of the motor coupling and spray arm during installation; ensure fasteners are tightened to spec.
• After installation, run a short cycle to check for leaks.

Fix a downdraft vent that won't turn on or respond to controls with this replacement control switch. Common repair for unresponsive downdraft systems.

Replacement retaining clip for downdraft ventilation systems. Secures components and trim pieces in place. Replace if damaged, cracked, or missing.

If exhaust odors linger when your range hood is off, this damper assembly restores proper vent control. Opens and closes to prevent backdrafts.

Fix weak or no ventilation in your downdraft system with this blower motor. Restores proper airflow and suction. Moderate DIY repair, 1-2 hours.

Removes smoke, grease, and odors from your downdraft ventilation system. Replace when clogged or damaged to maintain airflow. Confirm fit with your model.

Blower fan evacuates cooking fumes and odors from your downdraft system. Replace if ventilation weakens or noise increases. Verify fit with your model.

Fix a downdraft vent that won't raise or lower with this motor arm. Restores smooth up-and-down operation. Moderate DIY repair with basic tools.

This is a push button switch assembly used on a range hood or downdraft ventilation system to control fan speed or lighting functions. The assembly includes the switch mechanism and its cover. Replace this part if the buttons are unresponsive, stuck, cracked, or if the ventilation fan or lights no longer turn on or off when pressed.

Replace a broken or missing switch cover on your downdraft ventilation system. This access panel cover secures the control switch assembly for safe operation.

Secure downdraft ventilation panels and trim to eliminate rattles and maintain proper alignment. Replace when clips break or lose tension. Confirm fit with your model number before ordering.

Fix a downdraft ventilation system that won't turn on or off with this control switch. Direct replacement for non-responsive or stuck switches.

Genuine mounting screw for downdraft ventilation systems and range hoods. Secures panels and brackets. Replace if missing, stripped, or worn.