Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Wire connector block for washers. Transfers electrical connections between wiring harnesses. Replace if connector housing is cracked or melted.
Includes gasket sealer.
Washer motor shield deflects water, lint, and debris away from the drive motor. Replace if cracked or missing to prevent motor damage. Simple install.
Usually ships within 4 - 14 days
Liquid-filled balance ring mounts on top of the spin basket. Replace if cracked, leaking, or detached to restore smooth spinning and reduce vibration.
I found that the balance ring had popped loose from the top of the inner metal tub and had been scored so that the fluid was leaking out. So, I removed the metal shell of the washer, then the top plastic cover over the outer tub. I pulled out the old part and put on the new one. I had to give it a pretty good push downward to engage the clips and get it fully seated. I ran my hand along the inside of the metal tub to feel that the new balance ring was fully seated. I also used a short level to... Read more
A cam sleeve that supports and guides the cam on its shaft to keep the cam-driven mechanism moving smoothly. Replacing a worn sleeve helps restore correct alignment and reduces binding or intermittent movement. What it does
The spin tube bearing and the cam sleeve needed to be replaced. Read more
Rusted or missing motor shield letting debris reach your washer motor? This protective cover blocks foreign objects and secures the motor assembly. DIY repair.
The repair was simple. Having used Appliance Parts Pro in the past for much needed repair parts, I simply unplugged the machine, turned off the water and removed the drain hose and slid unit forward. I then removed the top control panel like last time, tilted the body forward and set it aside. I unfastened the upper hose to the water pump and slid what was left of the old shield out and slid the new replacement shield back into place then reattached the flex hose. The shield slipped right... Read more
Rear panel pad cushions and insulates the appliance's rear cabinet to reduce vibration, noise and rubbing against the back panel. Replacing a damaged pad helps stop rattles and protects internal components from wear. What it does:
Connects the drain hose to the washer drain outlet. Replace this coupling kit if cracked, broken, or leaking to restore a secure connection.
Use with motor 357282.
Replaced the clutch and water pump Read more
Touch up paint for appliances with chips, scratches, or worn spots. Includes brush applicator. Restores finish on damaged surfaces. 0.6 fl oz.
I ordered harvest gold touch-up paint and painted over the area. So far, the paint staying and I think it looks fine. This surely beats replacing the whole tub! Read more
Motor mount to gear case.
Used for direct drive washing machines. Complete assembly includes 2 level mechanism links, 1 level mechanism spring, 1 knurled pin, 2 rear feet, 1 pad plate, 1 suspension plate, 1 base pad, and 1 suspension spring retainer.
I ordered a Base frame assembly and front leveling feet along with locking nuts. I removed the broken parts by putting the washer on its' side and I removed the bolts on the bottom of the back panel and removed the motor and the transmission. I installed the new feet onto the new base frame and i slid the new frame into place and then I reattached everything. Read more
Outer tub assembly for your washer. Houses the inner basket and holds water during wash cycles. Replace if cracked, leaking, or damaged.
For mating plug use 691707.
Whirlpool trash compactor repair manual.