Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Lat50066aae Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Clamp Nut (Machine-Thread)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-2110472

This small clamping nut secures a mating clamp or bracket so the connected component stays firmly in place. Replacing a worn, stripped, or missing nut restores a solid hold and helps prevent looseness or leaks around the secured area.

  • Secures a clamp or bracket to its mounting point
  • Restores proper clamping force when the original nut is stripped or missing
  • Common signs: loose clamp, rattling/vibration, clamp won't tighten, minor leaks where the clamp is used
  • Durable hardware replacement to maintain stable, reliable assemblies
What's included: 1 clamping nut Install notes:
  • Disconnect power and shut off water/gas to the appliance before service
  • Note clamp/bracket orientation before removal for correct reassembly
  • Start threads by hand to prevent cross-threading; then tighten with the appropriate tool
  • Do not overtighten—snug just enough to securely clamp the component

Do-It-Yourself Stories from Customers like You Maytag clothes washer always had a terrible smell   Steve S. • Scott Afb , IL • January 10, 2015

I took the wash basket out of the tub to remove all the sludge and scale that had accumulated over the years. But I did not have a spanner wrench to remove the large nut holding the basket to the center shaft. No problem - I used a hammer and chisel on the ears. But didn't realize it was a LEFT HAND THREAD!! That's when the nut split in two and I had no choice but to purchase another. Long story short, it's back together and the washer doesn't smell anymore. Live and learn... Read more

More
Washer Water Injector (Upper)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001187

Fix water leaking onto the floor or uneven tub filling with this upper water injector. Directs inlet water cleanly into the tub. Easy DIY replacement.

Do-It-Yourself Stories from Customers like You Broken injector   Matt M. • Wheat Ridge , CO • June 28, 2019

An easy fix for the most part. I had no idea what I was doing, but glad I bought both upper and lower injectors. Not sure why these are separate parts? Cheap plastic. I did not get the hose clamp because I didn't think I would need it. You probably do, so go ahead and just order it or grab one if you have one laying around. Mine is hooked up without it for now which I'm sure I will regret later but I needed to get our washer running immediately due to a bed bug situation in our house. Read more

More
Lever Assy, Unbalance
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001969

 

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Unbalanace lever assembly broke and would not engage the door/unbalanced load switch   Abram K. • Derby , KS • December 31, 2015

Replaced the unbalanced lever assembly - cost about $14. I spent about as much time trying to find the part locally as it took to get the part from appliance pros; I ordered the part at 11:45 am on a Monday and the part was waiting for me by the time I got home from work on Tuesday - thank you. The parts schematics you provided on your website were very helpful. Read more

More
Motor Pulley
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-2008160

 

Do-It-Yourself Stories from Customers like You Washer tub would not empty   Robert B. • Haddon Heights , NJ • April 30, 2018

Water was not draining on spin cycle. Opened front cover and found belt laying on the floor. After further inspection found motor pulley wheel broken. Ordered pulley and belt kit. Replaced pulley along with pump belt and tub belt. Washer is working again. Read more

More
Spring-Timer Knob (Timer Control Knob)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP211065

This spring-timer knob replaces a worn, cracked or missing timer knob so you can set and adjust the appliance's mechanical timer reliably. Simple, direct replacement that restores the user control interface. What it does:

  • Fits onto the appliance's mechanical timer shaft to allow setting and advancing the timer
  • Restores a secure grip and pointer for accurate time selection
  • Commonly used to fix loose, cracked, stripped, or missing timer knobs
  • Helps resolve inability to turn or set the mechanical timer caused by a damaged knob
What's included: Includes: one spring-timer knob Install notes:
  • Disconnect power to the appliance before starting any repair
  • Pull the old knob straight off the timer shaft; align splines and press the new knob fully onto the shaft until seated
  • If the knob is tight, use a proper knob puller or gentle, even leverage to avoid damaging the shaft

More
Kit- Shaft
Genuine Whirlpool part
By: Whirlpool
Part Number: 6-2097820

 

Do-It-Yourself Stories from Customers like You Shaft seal leaked and rust expanded the thrust surface boss and broke allowing the shaft to slip to far into yoke jamming the transmission   Martin B. • Cincinnati , OH • January 17, 2018

Removed shaft with slide hammer and inspected the yoke and gearing replaced the shaft and seals with the shaft kit and replaced the tub bearing. 32 years and still running strong Maytag yeah!!!! Doubt the newer ones will run as long thanks for having the parts. Read more

More
Cap
Genuine Whirlpool part

Cap

By: Whirlpool
Part Number: WP214725

 

More
Unbalance Lever
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001681

 

More
Yoke
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-2066850

 

Do-It-Yourself Stories from Customers like You My 20 year old maytag washer was knocking durring the wash cycle   Dennis K. • Antioch , CA • November 15, 2015

I took the cover off the transmission and determined that the only possible knocking had to be coming from the yoke. I ordered a new yoke and all the tub seals needed to put it back together like new. I also ordered a new drive pulley bearing because this bearing is always turning whenever the washer is used. I cleaned all the parts up while I was waiting for the new parts to arrive. I promised my wife I would make it look like new. I installed all the new parts in one day and let the... Read more

More
Damper
Genuine Whirlpool part
By: Whirlpool
Part Number: 203725

 

More
Motor Mount
Genuine Whirlpool part
By: Whirlpool
Part Number: 205999

 

More
Block, Fuse
Genuine Whirlpool part
By: Whirlpool
Part Number: 207167

 

Do-It-Yourself Stories from Customers like You Washing machine lid switch   George A. • El Cajon , CA • August 27, 2016

Sears tech diagnosed the problem, gave me a $300 estimate, I watched how he took the lid apart and ordered the parts myself for $85, it took about an hour, turned it on and it started to go, I was very impressed and happy Read more

More
Filter- Se
Genuine Whirlpool part
By: Whirlpool
Part Number: 207219

 

Do-It-Yourself Stories from Customers like You 21 yr. old maytag washer was not agitating   Margaret K. • Sharon , CT • March 12, 2014

We took the machine all apart cleaned all parts lubricated all the moving parts and bought new belts and also the screens that go under the agitator Read more

More
Washer- Cu
Genuine Whirlpool part
By: Whirlpool
Part Number: 211100

 

More
Liner- Tub
Genuine Whirlpool part
By: Whirlpool
Part Number: 211130

 

More
Cord Grommet
Genuine Whirlpool part
By: Whirlpool
Part Number: 211881

 

More
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store