Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This is the motor housing or support bracket that holds the convection fan motor in place inside the oven. It secures the motor and ensures proper airflow for even cooking during convection baking. Replace this housing if it is cracked, warped from heat exposure, or if the convection fan vibrates excessively or sits loosely.
Maintains proper spacing and alignment in your dryer's belt path. Replace if you hear squeaking or notice belt tracking issues. Verify fit with your model.
I replaced the motor and all other moving components along with the felt drum seals.drum glides and drive belt. The wiring instruction is where i had the most problems. Because my wiring had only 4 wires in the harness not 5, and one was a different color then the instructions call out, I believe was because it might have been and older model. the instruction called for a gray wire but mine was white with a blue piggy back wire attached. but after finding a few videos on line i figured that the... Read more
Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.
Tested switch with a jumper. Confirmed the switch was bad. Ordered new switch, less than a minute installation.good to go Read more
Rubber foot pad that supports and stabilizes your range on the floor. Replace if cracked, broken, worn, or missing to keep your appliance level.
Ordered replacement parts and were better than the OEM that was on the range. Read more
Oven rack for electric and gas ranges. Provides stable surface for cookware during cooking. Replace if bent, warped, cracked, or missing.
Replaced them Read more
Seals blower housing to prevent air leaks and lint escape. Replace when you notice lint buildup in your home or reduced drying efficiency. Confirm fit with your model number.
Took the front panel off (the door front), disconnected the connector to the door switch and used a wooden clothespin to bypass the door switch. Turned on the dryer to locate loud squeaking sound and found it was coming from the motor area. When I started to take the blower section apart from the motor, that is when I saw the "blower wheel" slipped off the motor shaft. The blower wheel has a "C" clip retainer and compression ring to keep it snug on the motor shaft (but it was loose). Now I... Read more
This Fan Blade is an OEM part for LG microwaves. It is a critical component designed to circulate air within the microwave, aiding in heat dissipation and ensuring even cooking.
Fan blades in microwaves can suffer from wear, imbalance, or damage due to regular use or accumulation of debris. A malfunctioning fan blade can lead to inadequate ventilation, affecting the microwave's cooking efficiency and potentially causing overheating.
Symptoms of a bad fan blade include:
This OEM LG part is also compatible with some Sears/Kenmore models.
Replaced with a new motor. Read more
Insulates and supports electrical connections through the dryer chassis. Replace if cracked, heat-damaged, or broken to prevent shorts and restore safety.
I ordered all the parts necessary to replace the heating element and thermostat on a Sunday night. Appliance Parts Pros shipped on Monday AM and I received them on Wednesday. It took me 45 minutes to disassemble the dryer, replace the parts and have the dryer working again. It should be good for another 35 years which should cover me for my needs. Thanks again to Appliance Parts Pros for having the best service and always the correct parts. I am a huge fan of your company as you never... Read more
This is a 6-inch radiant heating element rated at 1200 watts that sits beneath the glass cooktop surface on an electric range. It provides heat for smaller burners used in everyday cooking. Replace this element if the burner fails to heat, heats unevenly, or does not respond when turned on.
It was very easy to find the part we needed, I put the model number in and it showed all the parts. Picked the broken buner, ordered it and was amazed, it came the next day. The directions were on the back of our stove. Simply followed what it said to do. Replaced burner, put it back together. Works perfectly. Wish we would of fixed it sooner. Saved having to have a service call. Read more
Range won't power on or display is blank? This power control board distributes electricity to electronics and major loads, restoring full functionality.
This is a metal clip that secures the drive motor in place within the dryer cabinet. It clamps around the motor housing to prevent movement during operation. Replace this clip if it is broken, missing, or bent, which can cause the motor to shift and create excessive vibration, rattling noises, or belt misalignment.
We took the dryer out of the laundry room and took it apart, after reviewing numerous videos at Appliance Parts Pros for direction. Removed front panel, front bulkhead and drum. Then removed exhaust duct, blower assembly and finally motor. (Use large flat blade screw-driver to press very hard down and out on motor mount to remove). After reinstalling all components....motor, new exhaust duct work,front bearings in front bulkhead, and blower assembly, all went back together great. The most... Read more
Oven not heating or cooking unevenly? This heating element generates the heat needed to cook food. Common fix for temperature issues in electric ovens.
This thermostat is a temperature-sensitive safety switch used in LG microwaves. It monitors internal temperature and opens the circuit when overheating is detected to help protect components from heat damage.
This clip and insulator assembly secures and electrically isolates a component inside a range or wall oven. It keeps the part firmly positioned while preventing shorts and heat damage, supporting accurate, safe appliance operation.
Burner won't heat or heats unevenly? This radiant surface element mounts under your glass cooktop to restore consistent heating. DIY-friendly repair.
I took some part numbers from the underneath side of the burner along with the stove model number and entered them on the internet and luckily found the part that I was looking for - I purchased it and it was delivered very quickly (faster than I expected). I took pictures of the burner before taking it apart and then removed the broken burner and replaced it with the new burner, put all the other parts back together and it worked perfectly the first time I turned it on. I feel like a real pro... Read more
Replace your burned-out or dim oven light bulb to restore interior visibility while cooking. Direct-fit incandescent lamp for safe food monitoring. Verify fit with your model number.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.