Ldf 6810 St Parts

This assembly includes the leveling leg adjuster components used to properly level and secure the dishwasher within its cabinet opening. It allows you to raise or lower the appliance so the door aligns correctly and the unit sits stable on uneven floors. Replace this kit if the dishwasher rocks, tilts, or if the existing leveling legs are stripped, broken, or no longer hold their position.

Fix a dishwasher that won't power on or turn off with this display power control board assembly. Restores electronic controls and user interface.

Fix a loose, broken, or wobbly dishwasher door with this handle. Simple installation using basic tools. Compatible with multiple models.

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This rubber gasket seals the fill funnel area inside the dishwasher, preventing water from leaking during the fill cycle. It sits between the fill funnel and the tub or dispenser housing to create a watertight seal. Replace this gasket if you notice water leaking beneath or around the dishwasher during operation, or if the old gasket appears cracked, warped, or deteriorated.

Fixes poor cleaning and spotty dishes caused by weak water spray. This dishwasher spray nozzle assembly restores proper water distribution. Moderate DIY.

The Drain Hose Assembly is an OEM component specifically designed for LG dishwashers. It safely directs wash water and waste from the dishwasher to a drain source such as the garbage disposal or vent pipe after each wash cycle.

Causes of failure typically include wear and tear over multiple years of daily use carrying hot, soapy water. Hoses can become weakened from kinking, impact damage or deterioration of plastics from chemical exposure. 

Symptoms of a bad drain hose include:

• Puddles or water leakage from the dishwasher 
• Inability to fully drain all wash water after cycles
• Damp containers inside from standing water issues

This OEM LG part is also compatible with select Sears/Kenmore dishwashers.

This is a replaceable tine row that attaches to the dishwasher dish rack, providing adjustable support to hold plates, bowls, and other items in place during the wash cycle. The tines help keep dishes separated for thorough cleaning and proper water circulation. Replace this part if the tines are broken, bent, or missing, causing dishes to shift or fall during operation.

This sump assembly sits at the base of the dishwasher and includes the drain pump, turbidity sensor, and diverter motor. It serves as the main water collection and circulation hub, directing water through the wash and drain cycles. Replace this assembly if the dishwasher is not draining properly, has poor wash performance, or displays error codes related to the drain pump or water sensor.

This safety switch assembly replaces a failed door/interlock switch to restore the appliance's ability to detect and respond to door position, helping ensure cycles only run when the door is closed. Fits as a direct replacement for the original switch assembly. What it does:

• Detects door/lid position and prevents operation when the door is open
• Helps stop the motor or heating function if the door is opened mid-cycle
• Commonly replaces units that show no power to controls or won't start with the door closed
• Can address intermittent operation or machines that behave as if the door is open

• Disconnect power before servicing to avoid shock or injury
• Replacement requires access to the door/lid area; basic hand tools needed
• Verify proper wiring orientation and secure connectors before reassembly

This packing seal provides a replacement sealing surface to help maintain an airtight, watertight closure and reduce leaks or drafts around the appliance opening. It restores the original sealing function for reliable performance. What it does

• Replaces worn or damaged packing to re-establish a secure seal
• Helps prevent water leaks and air infiltration at the door or panel seam
• Reduces moisture buildup and helps maintain proper internal temperatures
• Commonly used when a visible tear, deformation, or hardening is present

• One packing seal

• Inspect mating surfaces and clean thoroughly before installing the new packing
• Align the packing evenly and seat it fully into the channel or groove
• Use gentle, even pressure to avoid stretching or tearing the seal

Supports and guides moving components inside your dishwasher. Replace if your rail is cracked, broken, bent, or missing to restore smooth operation.

Direct-fit replacement dishwasher case assembly that secures and protects internal components. Replace your cracked, broken, or warped outer housing.

This water guide directs water through the dispenser/ice path so water flows where it should, helping prevent leaks and misdirected dispensing. It's a small molded channel designed to route cold water inside the refrigerator. What it does:

• Guides and channels water from the supply toward the dispenser or ice-making area
• Helps prevent water from dripping into areas it shouldn't and causing puddles
• Supports consistent dispensing by keeping the water path aligned
• Commonly replaced when cracked, warped, or when water is leaking or pooling

• One water guide piece as shown

• Disconnect power and shut off the water supply before replacing
• Remove any interior shelves or panels as needed to access the guide
• Handle carefully to avoid damaging mounting tabs or adjacent seals
• Secure all clips; test dispenser and check for leaks after installation

Lower dish rack assembly for your dishwasher. Replaces a cracked, rusted, warped, or broken lower rack with damaged or missing tines and wheels.