Ldf 6920St Parts

This clamp secures hoses or wiring to the appliance chassis to prevent movement, chafing, and vibration-related wear. It helps keep connections stable so hoses and wires stay in place during normal use. What it does:

• Holds water, drain or vent hoses in position to reduce strain and prevent rubbing
• Keeps wiring harnesses routed and fastened to avoid chafing or accidental disconnection
• Reduces vibration-related noise caused by loose hoses or wires
• Helps prevent hose kinks and unintended movement that can lead to leaks or intermittent electrical issues

• One clamp

• Disconnect power to the appliance before servicing; shut off water supply if working with water lines
• Remove panels as needed to access the hose or wiring route, then replace the clamp in the same orientation
• Use appropriate pliers or a screwdriver if required; do not overtighten or deform the hose or wiring
• If the original clamp was secured with a fastener, retain and reuse it only if undamaged; replace any stripped or broken hardware

Replacement rack restores usable storage and support inside the appliance so dishes, containers or cookware sit securely. Simple swap for a damaged, bent or missing shelf to get your appliance back to normal organization and use. What it does:

• Provides a stable shelf surface for storing cookware, dishes or food containers.
• Replaces racks with bent wires, broken supports or missing shelving.
• Helps prevent items from tipping or sliding during normal use.
• Designed to work with the appliance's original shelf mounts and guides.

• Disconnect power (or unplug) the appliance before handling internal parts.
• Handle edges carefully — metal shelves can have sharp points where wires are bent or clipped.
• Slide the rack into the existing tracks or clips; removals may require lifting the front slightly to clear stops.

The Dish Rack Tine is an OEM part for LG dishwashers. It is a key component that makes up the dish rack assembly and serves the essential purpose of supporting and orienting dishes during the washing cycle. The tines are designed with precise contours and resilient materials to securely hold a variety of dishware without tipping or sliding.

Symptoms of a bad dish rack tine include:

• Dishes slipping or sliding out of place during the wash cycle
• Chipped, cracked, warped, or bent tines that no longer firmly grip dishware
• Missing pieces that compromise the integrity of the dish rack assembly 

Replacing deteriorated tines can help restore optimum washing performance by ensuring dishes are properly positioned under spray jets. A functional dish rack is necessary to achieve clean results without damage to delicate items.

This OEM LG part is also compatible with Kenmore models. 

This roller assembly supports the dryer drum and lets it turn smoothly to help clothes tumble evenly. Replacing a worn roller restores proper drum rotation and reduces noise and wobble during use. What it does:

• Supports the dryer drum on a stationary shaft so the drum spins freely
• Reduces squeaking, grinding, or scraping noises from a worn roller
• Helps prevent drum wobble and uneven tumbling that can affect drying
• Restores smooth rotation for improved operation and reduced wear on other components

• One roller assembly

• Disconnect power before starting and remove the dryer back panel to access the drum rollers
• Inspect adjacent parts (belt, glides, rear bearing) and replace if worn to avoid repeat failures
• Reinstall drum and panels carefully, ensuring the roller rides squarely on the shaft and the drum is aligned
• Test spin by hand before reconnecting power and running a short cycle to confirm quiet, smooth operation

This Main PCB Power Control Board Assembly is the primary control board that manages power distribution and electronic control functions for the appliance, restoring responsive controls and proper power sequencing when the original board fails. What it does:

• Controls power to key appliance systems and coordinates electronic control signals
• May cause symptoms such as no power to the unit, unresponsive controls or display, intermittent operation, or failure of functions tied to the main board
• Replaces a failed or damaged main control board to restore normal electronic operation
• Matches the original OEM board layout and connectors for direct replacement when listed as compatible

• Disconnect power to the appliance before attempting diagnosis or replacement to avoid shock or damage
• Handle the circuit board by the edges and avoid static discharge—use proper ESD precautions
• Verify the part number on the old board matches 6871DD1006Q before ordering

The Utensils Basket Assembly is an OEM replacement part for LG dishwashers. This assembly holds utensils and other small dishes upright during the washing cycle. It is designed with multi-level prongs and slots to accommodate different-sized utensils in an organized manner. 

Symptoms of a bad utensils basket assembly include:

• Prongs that are bent or broken, preventing proper placement of utensils
• Detached or missing pieces that compromise the structural integrity of the basket
• Difficulty removing or replacing the basket due to damage or wear

Causes of failure may include normal wear and tear over time, damage from improper loading of utensils, or handling during cleaning. 

This LG replacement part is also compatible with select Sears/Kenmore brand models..

This drum roller supports the dryer drum so it spins smoothly and quietly. Replacing a worn roller restores stable drum rotation and helps reduce rubbing, scraping or thumping noises during operation. What it does:

• Supports and guides the dryer drum for even, stable rotation
• Reduces friction and drum wobble that can cause noisy operation
• Helps the drive belt track correctly and maintain proper drum alignment
• Common symptom: squeaking, thumping, or rubbing sounds and uneven spinning

• Disconnect power before starting any repair
• Remove the dryer drum or access panel to inspect and replace the roller; support the drum while removing/reinstalling
• Check other drum rollers, bearings and the drive belt for wear and replace as needed to prevent repeat failure
• Reassemble carefully and test with the dryer empty to ensure smooth, quiet rotation

This holder is a small mounting bracket used inside the dishwasher to secure its mating component so it stays aligned and stable during operation. Replacing a cracked or missing holder restores proper support and prevents looseness or rattling.

• Secures an associated interior component in position on the tub, rack, or related assembly
• Maintains alignment to help the component operate smoothly
• Helps prevent vibration, rattling, or parts coming loose during cycles
• Common signs of failure: visible cracks, missing clip, or the attached part won't stay put

• Disconnect power and water supply before servicing; wear cut-resistant gloves
• Open the door and remove any rack or cover needed to access the holder
• Note the original orientation; transfer any reusable screws or clips
• After reassembly, run a short test cycle to verify proper operation

This replacement holder secures internal components in place to restore proper alignment and reduce movement inside the appliance. A simple, low-cost part that helps stop rattling and maintain reliable operation. What it does:

• Provides a stable mounting point to keep parts aligned and prevent excessive movement.
• Can stop or reduce rattling, knocking, or shifting of internal components.
• Helps maintain proper component positioning for consistent performance.
• Prevents wear caused by loose or misaligned parts.

• Disconnect power (and water, if applicable) before beginning any repair.
• Access may require removing outer or access panels; keep fasteners organized.
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit.

This main control board is the primary electronic controller that manages appliance functions and cycles, restoring proper control when the original circuit board fails. It replaces a faulty or unresponsive main PCB to help return normal operation. What it does:

• Controls and sequences the appliance's major functions based on user settings
• Processes inputs from buttons, sensors and door switches to run cycles correctly
• Can stop erratic behavior caused by failed or damaged electronics
• Resolve symptoms like no power to controls, unresponsive buttons, or incorrect cycle behavior

• Disconnect power before attempting any diagnostics or replacement
• Handle the board by its edges and avoid static discharge; use anti-static precautions
• Verify connector fit and seating; do not force connectors or bend pins

This inlet hose directs the incoming water supply into the appliance so it can fill and operate properly. Replacing a damaged or worn inlet hose restores a secure water connection and helps prevent leaks and fill issues. What it does:

• Channels household water from the supply to the appliance's fill system.
• Ensures a watertight connection at the water inlet to reduce leak risk.
• Restores normal fill behavior when a cracked, split, or clogged hose causes slow fill or no fill.
• Works with standard inlet fittings and clamps used on compatible appliances.

• One inlet hose.

• Turn off the water supply and unplug or disconnect power before servicing.
• Use the correct fittings and clamps; hand-start threads to avoid cross-threading, then snug with a wrench—do not overtighten.
• Inspect hose ends and inlet seal for damage; replace clamps or seals if needed.
• After installation, restore water and power, run a short fill cycle and check thoroughly for leaks.

The Spring, Hinge is an OEM part for LG dishwashers. It is a small coil component that provides counterbalancing tension to assist in the opening and closing of the dishwasher door. Located within the hinge mechanism, the spring works with other internal parts to smoothly control door movement.

Symptoms of a bad spring, hinge include:

• The door not staying fully open during loading/unloading of dishes
• Difficulty opening or closing the door due to lack of tensional balance  
• Uneven gap between the door and the dishwasher cabinet

Causes of spring failure can be frequent cycles of compression and release that result in metal fatigue. Damage from handling is also possible. 

This OEM LG part is also compatible with Kenmore models.

Replacement stopper roller that helps guide and cushion a moving component so panels or doors run smoothly and quietly. Restores stable operation and reduces rubbing or binding. What it does:

• Guides and supports a moving panel or door to maintain alignment and smooth travel
• Cushions contact to reduce noise, vibration, and wear
• Prevents rubbing or binding that can lead to uneven movement or damage
• Common symptoms a bad stopper roller may cause: squeaking, grinding, sticking, or misaligned panels

• Disconnect power to the appliance before beginning any repair
• Remove any panels or trim blocking access; keep track of fasteners
• Replace the worn stopper roller with the exact part, secure fasteners, and confirm smooth movement

This hinge bracket secures the appliance door to the cabinet and provides a stable pivot point for smooth opening and closing. Replaces a worn or broken bracket to restore proper door alignment and sealing. What it does:

• Supports and locates the door hinge so the door pivots correctly.
• Restores proper door alignment and helps the door close and latch securely.
• Stops sagging, uneven gaps, or scraping caused by a damaged bracket.
• Works as the mounting point for hinge pin hardware.

• One hinge bracket

• Disconnect power (and water supply if applicable) before starting any repair.
• Support the door during removal to prevent it from dropping; two-person lift may be required for heavier doors.
• Retain or reuse original hinge pins, screws, and shims unless replacements are specified.

This holder is a small mounting bracket that secures related components in place, helping maintain proper alignment and quiet operation. It replaces worn or broken holders to restore stable support for the attached part. What it does:

• Secures and supports the associated component to prevent shifting or sagging
• Maintains alignment to help ensure smooth operation and reduce noise
• Worn, cracked, or broken holders can cause rattling, misalignment, or component movement
• Used where a fixed support point is required inside the appliance

• One holder/mounting bracket

• Disconnect power (and water if applicable) before starting any repair
• Remove nearby panels or components as needed for access; keep fasteners for reassembly
• Inspect surrounding clips, screws, and mounting points and replace if damaged

This parts assembly is a direct-replacement assembly used to restore the original mechanical/electrical components it contains so the appliance can operate as designed. It replaces a worn or damaged assembly to help resolve related failures. What it does

• Replaces the factory assembly that houses the appliance's internal components and connections.
• Restores proper component alignment and secure mounting to prevent intermittent faults.
• Addresses symptoms such as failure to operate, unusual noises, loose or damaged internal parts, or intermittent electrical/connectivity issues.
• Works as the factory-specified repair for units showing wear or damage in the affected assembly area.

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock or injury.
• Handle internal components carefully to avoid damage to wiring, connectors, or sensors.
• Follow the OEM service manual and wiring diagrams for correct installation and routing.