Ldf 6920St Parts

A small snap-on trim cap used to cover and protect exposed fasteners or openings, restoring the appliance's finished appearance and helping keep debris out of the cavity. What it does

• Covers and conceals exposed screw heads or shaft ends for a clean look
• Helps prevent dust and lint from entering small openings
• Restores damaged or missing finish trim on the appliance
• Fits as a simple cosmetic/protective replacement — commonly used where a snap-fit cap is required

What's included

• One cap cover

Install notes

• Snap into place over the exposed fastener or opening; no special tools usually required
• Disconnect power or follow appliance safety procedures if working near electrical components
• Replace only with the matching part number to ensure proper fit

This water guide directs and supports water flow inside the refrigerator to the dispenser or ice-making path, helping ensure consistent delivery and reducing misdirected leaks. It's a small plastic channel used where tubing or water needs routing. What it does

• Guides and stabilizes the water flow path between the supply tubing and dispenser or ice-maker components
• Helps prevent water from spraying or pooling by keeping the line aligned
• Can stop intermittent leaks caused by misrouted tubing or broken guide clips
• Reduces vibration-related noise by supporting tubing in place

• One water guide

• Disconnect power and turn off the water supply before installing
• Replace only with the exact replacement part; inspect adjacent tubing and seals while open
• Handle the guide gently to avoid cracking the plastic; use basic hand tools only

This holder is a small mounting bracket that secures internal components in place to maintain proper alignment and reduce movement. Replacing a damaged holder helps stop rattling and keeps parts positioned for reliable operation. What it does:

• Secures and stabilizes an internal component or subassembly to the appliance chassis
• Prevents shifting or vibration that can cause noise, wear, or intermittent function
• Restores correct part alignment if the original holder is cracked, broken, or missing
• Helps maintain safe contact and spacing between adjacent components

• Disconnect the appliance from power (unplug or shut off breaker) before starting any repair
• Inspect surrounding components for damage and replace any broken fasteners or clips as needed
• Basic hand tools typically required; follow the appliance service manual or OEM diagram for correct placement

A replacement rail assembly that supports the dryer drum and helps maintain smooth, quiet rotation. Restores proper drum alignment and reduces rubbing or scraping sounds when the drum turns. What it does:

• Supports and guides the dryer drum for stable rotation
• Helps prevent drum wobble, friction noises, and uneven wear
• Restores correct drum alignment after rail or support failure
• Can improve noisy operation caused by worn or damaged rails

• One rail assembly

• Disconnect power before beginning repair; for gas dryers also shut off gas supply
• Drum removal is commonly required for access — follow the OEM service instructions
• Inspect adjacent drum glides, rollers, and seals and replace if worn

The Hinge is an OEM part for LG dishwashers. It serves as an integral connector allowing the dishwasher door to smoothly swing open and closed during loading and unloading. With precise tolerances and corrosion-resistant construction, the hinge is designed to withstand centuries of use without compromising functionality.

Causes of a bad hinge can include breaking or cracking from heavy pots and pans, damage during installation repairs, or wear from extended use.

Symptoms of a bad hinge include:

• Door that does not close or seal properly
• Difficulty or resistance in opening/closing movement
• Noise or vibration emanating from the hinge area
• Misalignment causing binding or hanging up partially open

This quality replacement hinge also provides a factory warranty and is compatible with models from Amana, Hotpoint, RCA, and select Kenmore dishwashers.

This frame assembly replaces a damaged or worn front cabinet frame to restore a secure fit and finished appearance. It provides a stable mounting surface for door components and helps maintain proper alignment. What it does:

• Replaces cracked, bent, or cosmetically damaged front frame pieces
• Restores proper fit and alignment for the door and trim
• Helps eliminate gaps that can trap debris or affect door operation
• Provides the original mounting points for associated trim and hardware

• One frame assembly

• Disconnect power and follow appliance-specific safety procedures before servicing
• Handle carefully to avoid scratching or damaging adjacent panels and trim
• Installation typically requires removing door/trim and fastening with existing screws or clips

This hinge assembly secures and pivots a refrigerator or freezer door to ensure proper alignment and smooth opening. Replaces a worn or damaged door hinge to restore stable door movement and a tight seal. What it does:

• Supports the appliance door and provides a pivot point for opening and closing.
• Restores correct door alignment to help maintain an even seal and reduce gaps.
• Reduces sagging, scraping, or uneven movement caused by a worn hinge.
• Works with the cabinet mounting point to keep the door stable during use.

• One hinge assembly

• Turn off power to the appliance and remove stored items from the door before starting.
• Use proper tools and follow OEM instructions or service manual for safe removal and installation.
• Handle glass shelves and door panels carefully; some installations require temporary support of the door.

Color: gray. Measures about 1 inch high by 4 inches deep.

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This supporter hinge is a replacement hinge support bracket that helps secure and align the appliance door so it opens and closes smoothly. It restores proper hinge positioning to reduce door sag and uneven sealing. What it does:

• Secures the door hinge assembly and provides a stable mounting point
• Helps maintain door alignment to improve sealing and reduce gaps
• Reduces door sag and uneven wear on hinge components
• Restores smooth door movement and consistent closing

• One supporter hinge / hinge support bracket

• Disconnect power to the appliance before starting any repair
• Remove the door per the service manual instructions to access the hinge support
• Use appropriate hand tools and keep fasteners organized for reassembly
• Do not overtighten mounting screws; adjust hinge alignment as needed after installation

The Drain Hose Assy is an OEM component specifically designed for LG dishwashers. This hose works with the drain pump to effectively drain wash water from the dishwasher tub after each cycle. 

The drain hose assy is responsible for efficiently draining wash water during and after the dishwashing cycle. It allows used water to be drained properly, keeping the dishwasher tub and components clean and dry between cycles. 

Symptoms of a bad drain hose assy include:

• Incomplete draining of wash water after cycles
• Water remaining or pooling in the bottom tub 
• Leaks or puddling near the drain pump or hose area
• Loud noises or vibrations from the drain pump

This OEM LG part is also compatible with select Sears/Kenmore.

The Tine Row Clip is an OEM part for LG dishwashers. 

Causes of a faulty tine row clip can include wear and cracking over multiple wash cycles in high heat. Metal fatigue weakens secure retention over time.

Symptoms of a problematic tine row clip include:

• Loose or rattling tines that shift positions between washes
• Dishes facing spray nozzles are completely missed
• Cleaning inconsistencies reported on certain sections

This LG part is also compatible with some Kenmore models.
 

The Rack is an OEM part for LG dishwashers. It is responsible for holding dishes, glassware, cutlery and other items securely in place during the wash cycle. The rack features an adjustable design that allows it to fit variably sized loads. 

Causes of a bad rack can include warping or bending of the wires over time due to heavy loads, and damage to the rack's ability to pivot or slide properly due to excess debris or buildup. 

Symptoms of a bad rack include:

• Dishes and silverware falling over or not being securely held in place during the wash cycle
• Difficulty fitting dishes evenly on the rack 
• Damage or bending of the rack wires
• Rust or corrosion building up on the rack

This OEM LG part is also compatible with select Sears/Kenmore models.