Ldf353285 Parts

Lower spray arm assembly mounts at the bottom of the dishwasher tub and rotates to distribute wash water. Replace if cracked, clogged, or broken.

Small sleeve bushing that supports pivoting or rotating joints in your dishwasher. Replace when worn, cracked, or causing excess friction between moving parts.

This mounting bracket kit secures your dishwasher to the countertop from above, preventing it from tipping forward when the door is opened. It replaces worn or missing brackets that allow the dishwasher to move or become unstable during operation.

Fixes noisy wash cycles and dishes that won't come clean. This motor drives water through spray arms. DIY install takes 90 minutes with basic tools.

Loud droning noise during cycles? A cracked pump casing causes leaks and poor water flow. Moderate DIY repair requires dishwasher removal and reinstall.

The Blower Motor Casing Assembly is an OEM part for LG dishwashers. This part houses the blower motor which generates airflow through the wash arms and drying vent. The casing is precision-engineered to fit securely within the dishwasher's structure.

Causes of a bad blower motor casing assembly can include cracked or warped plastic from repeated heating and cooling cycles. The seals around the motor connection points may also deteriorate over time.

Symptoms include:

• Incomplete or overly long drying cycle times
• Water pooling in the bottom of the dishwasher after cycles
• Sloshing or excess moisture noise heard coming from inside
• Irregular or strange smells emanating from within the unit

This LG part is also compatible with some Kenmore models.

Replace a cracked, broken, or clogged dishwasher spray arm nozzle assembly. Installs inside the tub to direct wash water through jets for coverage.

This is the lower dish rack assembly that slides in and out of the dishwasher on rollers and holds plates, bowls, and cookware during the wash cycle. It includes the rack frame and tine rows designed to keep items separated for thorough cleaning. Replace this assembly if the rack has broken or bent tines, corroded coating that leaves rust marks on dishes, or damaged rollers that prevent smooth sliding.

This guide assembly is the sliding rail that supports and aligns the freezer drawer. When worn or damaged, it can cause sticking, sagging, or poor sealing; replacing it restores smooth operation and proper drawer closure.

• Supports the freezer drawer and lets it glide smoothly in and out
• Keeps the drawer square and aligned with the front panel
• Helps the drawer close fully to maintain a proper seal
• Common symptoms: drawer hard to open/close, crooked or sagging drawer, grinding/squeaking, frost from incomplete closure, visible rail damage

• Disconnect power before servicing; empty the freezer drawer
• Pull the drawer out, remove the front panel and basket as needed
• Remove mounting screws and the old guide; reuse existing hardware if applicable
• Install the new guide, then verify both sides move evenly and the drawer seals properly

This hose connector links two components in the appliance's water path to create a flexible, leak-resistant connection. Replacing a worn or cracked connector helps stop leaks and restore proper water flow and performance.

• Joins fittings or assemblies within the internal water system
• Maintains a watertight seal under normal operating pressure
• Helps resolve leaks, pooling, or related error codes/performance issues
• Common failure signs: visible cracks, swelling, brittleness, or a loose fit at the connection points

• Disconnect power and shut off the water supply before servicing
• Note hose routing and orientation; take a photo for reference
• Transfer and correctly position any clamps; tighten securely without over-tightening
• After installation, run a test and inspect all joints for leaks

Replaces a damaged, broken, or missing row of prongs on your dishwasher rack. Restores secure spacing to hold plates and dishes upright during cycles.

Secures the temperature sensor in place inside your dishwasher's sump area. Replace if the holder is cracked, broken, or missing to keep the thermistor properly positioned.

This sensor monitors water flow inside the dishwasher to ensure proper water circulation during wash and rinse cycles. It sends signals to the control board to regulate water intake and pump operation. Replace this sensor if the dishwasher displays error codes related to water flow, fails to fill properly, or stops mid-cycle due to incorrect flow detection.

Screens debris to protect components and maintain cleaning performance. Replace if torn, warped, or clogged to restore water flow. Confirm fit with model.

This sensor assembly monitors conditions inside the dishwasher during the wash cycle, such as water level or water turbidity, and sends signals to the control board to adjust cycle timing and water usage. It helps the dishwasher determine when dishes are clean. Replace this part if the dishwasher runs excessively long cycles, does not fill properly, or displays sensor-related error codes.

Joins dishwasher hoses to ports for leak-resistant connections. Replace this small connector if it's cracked, split, or loose to stop drips at the joint.