Ldf5545ww/008874St Parts

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restore correct alignment and sealing.
• Secures the door assembly and helps prevent gaps that can cause drafts or heat loss.
• Eliminates cosmetic damage like cracks, dents, or warped trim for improved appearance.
• Can reduce rattling or noisy operation caused by a loose or broken frame.

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panels per the service manual to reach mounting screws—keep track of fasteners.
• Handle trim and any attached glass carefully to avoid breakage or injury.

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures the door lock/latch assembly to the oven frame so the door closes and stays latched
• Commonly replaced when the door feels loose, won't stay closed, or the oven doesn't start
• Works with the lock components to maintain proper door alignment and switch activation
• Helps prevent intermittent operation caused by a misaligned or damaged latch mount

• Basic hand tools required; access typically through the front control/door area—refer to model service instructions
• Power off and unplug the appliance before attempting any repair; disconnect power at the breaker if hardwired
• Handle door and latch components gently to avoid harming the door glass, switches, or wiring

The Control Board Assembly is an OEM replacement part for LG dishwashers. As the central electronic control unit, it governs all dishwasher functions like wash cycles, heating, water inlet and drainage. The control board receives inputs from sensors to power relays, motors and send output signals accordingly.

Symptoms of a faulty control board include:

• Failure to start or complete cycles 
• Inoperative or faulty display/buttons
• Unusual noises from improperly regulated components  
• Inability to sense soil levels or temperature accurately

Common causes are moisture damage, loose connections leading to shorts, and standard wear over time under high-heat working conditions.

This authentic LG part is also compatible with select Kenmore brands. 

This PCB assembly is the appliance's main control board that manages cycle commands, sensor signals and user inputs to keep the appliance operating correctly. Replacing a faulty board restores control and communication functions. What it does:

• Receives inputs from the control panel and sends commands to motors, valves and heaters
• Monitors sensor signals and timing functions to coordinate cycles
• Stops operation or causes errors if the board fails or loses power
• Common symptom link: unresponsive controls, error codes, or appliance that won't start

• One PCB assembly (control board)

• Disconnect power before starting and verify power is removed to avoid shock
• Handle the board carefully and avoid touching components or connectors; observe electrostatic discharge (ESD) precautions
• Inspect connectors and wiring for damage and ensure secure connections during reassembly

This connector assembly links a refrigerator's wiring harness to internal components, restoring a secure electrical connection for reliable operation and safe component communication. What it does

• Provides a secure plug connection between the wiring harness and internal modules or components
• Restores power/communication when a broken or damaged connector causes intermittent operation or failure
• Helps stop arcing, loose connections, and related error symptoms from faulty or corroded terminals
• Supports reliable signal transfer for sensors, lights, or control boards where used

• One connector assembly

• Disconnect power to the appliance before inspecting or replacing electrical connectors
• Handle wiring and terminals carefully to avoid bending pins or damaging insulation
• After installation, restore power and test affected functions for normal operation

The Cover Assembly is an OEM component specifically designed for LG dishwashers. This assembly consists of the outer tub cover and inner mounted components that protect internal mechanisms.

Causes of a bad cover assembly can include cracks, dents, or other physical damage from regular loading and unloading of dishes. Harsh or abrasive cleaners can degrade protective surfaces over time as well. 

Symptoms of a bad cover assembly include:

• Water leaks inside or outside the dishwasher 
• Loose, unstable, or damaged outer tub cover
• Detached or broken mounting clips for inner components

This OEM LG part is also compatible with Sears/Kenmore dishwashers. Replacing the entire cover assembly restores integrity to protect sensitive inside parts. Proper maintenance extends the lifespan of exterior components.
 

This drum roller supports the dryer drum for smooth rotation and quieter operation. Replacing a worn roller helps reduce noise and drum wobble so the dryer runs more reliably. What it does:

• Supports the drum rim and allows the drum to spin smoothly under load
• Reduces squeaks, thumps and vibration caused by worn or damaged rollers
• Helps prevent uneven drum wear and excessive belt stress
• Works as a direct replacement for the factory roller in compatible dryers

• Disconnect power (and gas, if applicable) before beginning any service
• Access the roller per the manufacturer's service instructions (panel/drum removal is typically required)
• Inspect the drum, belt and other rollers/shafts while the unit is open; replace any worn components
• After installation, rotate the drum by hand to ensure smooth movement before reassembly

This case assembly is the outer housing that holds and protects the appliance's control components and switches, restoring a finished appearance and keeping electronics secure. It's a direct-replacement style part for visible control areas. What it does:

• Provides a protective enclosure for control boards, switches and user interface components
• Restores a secure, stable mounting point for buttons, levers and display elements
• Helps prevent dust, moisture and debris from reaching internal electronics
• Can resolve loose or damaged control bezel issues and improve appliance appearance

• Handle carefully to avoid scratching the visible surfaces and damaging tabs or mounting points
• Power off and unplug the appliance before starting work to reduce risk of shock
• Retain and reuse any clips, screws or gaskets from the original part unless replacements are supplied

This rail assembly supports and guides a moving component inside the appliance, helping parts slide smoothly and stay aligned for reliable operation. It replaces worn or damaged rails to reduce noise and misalignment. What it does:

• Provides a stable track for the appliance component to slide or roll on
• Restores proper alignment to reduce binding, scraping, or grinding noises
• Helps maintain smooth movement and consistent operation during cycles
• Prevents uneven wear on adjacent parts caused by a damaged rail

• Disconnect power (and water, if applicable) before servicing
• Basic hand tools may be required; follow the appliance service manual for disassembly/reassembly
• Handle carefully to avoid sharp edges and to prevent damage to surrounding components

This blower cover is the outer housing piece that directs airflow from the blower assembly and protects the fan motor and internal components. It helps maintain proper airflow path and reduces contact with moving parts. What it does:

• Directs and channels airflow from the blower to the unit's vents for efficient circulation
• Protects the blower wheel and motor from debris and accidental contact
• Helps reduce rattling and vibration when the cover is intact and properly seated
• May cause decreased airflow or unusual noise if cracked, warped, or missing

• Disconnect power to the appliance before performing any service
• Typically installed with a few screws or clips after removing the front grill or access panel
• Handle plastic tabs gently to avoid breakage; align clips before tightening fasteners

This lower frame is the factory replacement trim piece that mounts to the base of the appliance door/cabinet, restoring proper fit and finished appearance. It helps protect the lower edge and keeps the door aligned. What it does:

• Replaces a damaged, cracked or bent lower cabinet/door frame to restore proper sealing and appearance.
• Supports the bottom edge of the door or cabinet opening to help maintain alignment and smooth operation.
• Prevents debris and moisture from collecting under the door trim.
• Helps eliminate rattling or loose trim caused by broken or worn lower frame pieces.

• One lower frame

• Basic removal of the door or front panel may be required; retain screws and fasteners for reassembly.
• Handle panels and sharp edges with care; wear gloves to protect hands.
• Disconnect power (and water if applicable) to the appliance before beginning any disassembly.

This rail assembly replaces a worn or damaged rack guide to restore smooth sliding and proper rack support. It helps the dishwasher rack track correctly so loading and unloading are easier and safer. What it does:

• Guides the dishwasher rack along its track for consistent motion
• Prevents rack from sagging, binding, or coming off the track
• Reduces noisy or jerky rack movement during cycles
• Restores proper alignment for baskets and loaded dishes

• Disconnect power to the appliance before starting any repair
• Turn off the water supply and open the door fully for safe access when applicable
• Handle edges carefully and keep small fasteners secured during reassembly

This replacement parts assembly restores the original sub-assembly function in compatible LG appliances, letting the appliance operate as designed. Use it when a worn or damaged internal assembly is preventing normal operation. What it does:

• Replaces a damaged or worn internal sub-assembly to restore proper operation
• Addresses symptoms such as intermittent operation, a component not responding, or unusual noises coming from the affected area
• Restores mechanical or electrical connections within the appliance where this assembly is used
• Useful when disassembly reveals broken clips, connectors, or mounting features on the original part

• Disconnect power and water (if applicable) before beginning any repair
• Keep all mounting hardware and connectors; some may need to be reused