Ldp679 Parts

Right side

The Rail Assembly is an OEM part for LG dishwashers. It is a part that supports and guides the motion of the dish racks in and out of the dishwasher. The rail assembly is designed with precision fits and smooth surfaces to allow easy extension and retraction of the racks.

Causes of a bad dishwasher rail assembly can include wear and deterioration over time, damage from heavy loads that put stress on the rails, or impact damage from accidental handling.

Symptoms of a bad rail assembly include:

• Difficulty extending or retracting the dish racks
• Noisy or grinding sounds when operating the racks
• Misalignment of the racks that causes dishes to rub or stop moving properly
• Leaks or pooling of water inside the dishwasher door

This LG part is also compatible with some Kenmore models.

Check valve that prevents water backflow in the appliance's supply line, helping restore proper water flow to the ice maker or dispenser. Replaces a failed valve to address leaking, slow fills, or no-fill conditions. What it does:

• Stops reverse flow in the water line so water only moves toward the dispenser or ice maker
• Helps prevent water leaks and cross-contamination of the supply line
• Common symptom fixes: intermittent or no water to ice maker/dispenser, weak fills, or water pooling
• Fits inline with existing water tubing and works with the appliance's fill system

• Shut off water supply and unplug the appliance before replacing the valve
• Confirm tubing size and orientation before installation; install with correct flow direction
• Tighten fittings to prevent leaks but avoid overtightening plastic fittings

Replacement wire rack for your dishwasher. Provides secure support for dishes and cookware. Install when original rack is cracked, bent, or missing.

Sliding track that guides dishwasher drawer or rack for smooth movement. Replace if bent, cracked, or worn to restore proper alignment and operation.

Replace broken or missing tines in your dishwasher's dish rack. This prong holds and spaces dishes securely during wash cycles. Ideal for cracked tines.

This locker lock is the replacement latch mechanism that secures the appliance door during operation, restoring proper door closure and helping the unit run safely and reliably. Use when a door won't stay closed or the machine won't start. What it does:

• Replaces a worn or broken door latch to restore secure door closure
• Helps ensure the appliance detects a closed door and can start cycles
• Commonly used when the door is loose, won't latch, or causes door-sensor errors
• Fits into the door strike area and engages the cabinet catch for a firm hold

• Locker lock (single replacement latch)

• Disconnect power and water supply before servicing to avoid shock or injury
• Remove the outer door panel or access cover as needed to reach the latch area
• Verify alignment of the latch and striker when reinstalling to ensure proper engagement

Holds utensils and small items upright in your dishwasher's lower rack. Replace if the basket is cracked, broken, or missing prongs that no longer secure items.

This inlet hose directs the incoming water supply into the appliance so it can fill and operate properly. Replacing a damaged or worn inlet hose restores a secure water connection and helps prevent leaks and fill issues. What it does:

• Channels household water from the supply to the appliance's fill system.
• Ensures a watertight connection at the water inlet to reduce leak risk.
• Restores normal fill behavior when a cracked, split, or clogged hose causes slow fill or no fill.
• Works with standard inlet fittings and clamps used on compatible appliances.

• One inlet hose.

• Turn off the water supply and unplug or disconnect power before servicing.
• Use the correct fittings and clamps; hand-start threads to avoid cross-threading, then snug with a wrench—do not overtighten.
• Inspect hose ends and inlet seal for damage; replace clamps or seals if needed.
• After installation, restore water and power, run a short fill cycle and check thoroughly for leaks.

Door won't stay open or slams shut? This dishwasher door hinge spring provides counterbalancing tension for smooth opening and closing operation.

This drain hose assembly provides a secure path for wastewater from the appliance to the household drain or drain pump, helping prevent leaks and restore proper draining performance. What it does:

• Channels discharged water away from the tub to the drain or pump
• Replaces cracked, split or collapsed hoses that can cause leaks
• Helps resolve symptoms like slow or no drainage and water remaining after a cycle
• Keeps connections sealed when installed with proper clamps to reduce drip points

• Disconnect power and shut off water supply before beginning any work
• Inspect and reuse or replace hose clamps as needed; ensure tight, leak-free connections
• Route hose without sharp bends or kinks and secure to prevent strain
• Run a short test cycle and check all connections for leaks before regular use

This is a protective cover that fits over the electrical terminal block or wiring connections on a dishwasher. It shields the wiring and electrical connections from moisture and accidental contact, ensuring safe operation. Replace this cover if it is cracked, broken, or missing, as exposed electrical connections pose a safety hazard.

A small snap-on trim cap used to cover and protect exposed fasteners or openings, restoring the appliance's finished appearance and helping keep debris out of the cavity. What it does

• Covers and conceals exposed screw heads or shaft ends for a clean look
• Helps prevent dust and lint from entering small openings
• Restores damaged or missing finish trim on the appliance
• Fits as a simple cosmetic/protective replacement — commonly used where a snap-fit cap is required

What's included

• One cap cover

Install notes

• Snap into place over the exposed fastener or opening; no special tools usually required
• Disconnect power or follow appliance safety procedures if working near electrical components
• Replace only with the matching part number to ensure proper fit

This is the upper rack that slides in and out of the dishwasher on roller tracks and holds dishes, cups, and smaller items during the wash cycle. It includes the rack frame and tine rows that keep items separated for proper water circulation. Replace this if this rack is rusted, has broken or bent tines.

Stopper roller guides and cushions dishwasher panels for smooth, quiet operation. Replace if door binds, rubs, or moves unevenly. Confirm fit with your model.

This is a left-side dishrack adjuster assembly that allows the upper rack in a dishwasher to be raised or lowered to accommodate different dish sizes. It includes the adjuster mechanism and handle that attach to the side rail of the upper rack. Replace this part if the upper rack tilts, won't stay in position, or if the adjuster handle is broken or difficult to operate.

This is a roller assembly that mounts on the left side of the upper dish rack, allowing it to slide in and out of the dishwasher smoothly. The roller rides along the track inside the dishwasher tub. Replace this roller if the upper rack is difficult to slide, tilts to one side, or if the roller is cracked, worn, or no longer spinning freely.