Ldp679 Parts

This guide assembly is the sliding rail that supports and aligns the freezer drawer. When worn or damaged, it can cause sticking, sagging, or poor sealing; replacing it restores smooth operation and proper drawer closure.

• Supports the freezer drawer and lets it glide smoothly in and out
• Keeps the drawer square and aligned with the front panel
• Helps the drawer close fully to maintain a proper seal
• Common symptoms: drawer hard to open/close, crooked or sagging drawer, grinding/squeaking, frost from incomplete closure, visible rail damage

• Disconnect power before servicing; empty the freezer drawer
• Pull the drawer out, remove the front panel and basket as needed
• Remove mounting screws and the old guide; reuse existing hardware if applicable
• Install the new guide, then verify both sides move evenly and the drawer seals properly

Fix visible cracks or damage to your dishwasher's base enclosure with this lower cover assembly. Houses motor and pump components securely.

Dishes not getting clean or water not spraying properly? This dishwasher nozzle assembly sprays water during wash cycles. Moderately easy DIY repair.

This is a protective cover that fits over the electrical terminal block or wiring connections on a dishwasher. It shields the wiring and electrical connections from moisture and accidental contact, ensuring safe operation. Replace this cover if it is cracked, broken, or missing, as exposed electrical connections pose a safety hazard.

These are support rails that guide and support the dish racks inside the dishwasher, allowing them to slide in and out smoothly. They mount along the interior walls of the dishwasher tub. Replace them if the racks are difficult to slide, sit unevenly, tilt, or fall off track during loading and unloading.

This parts assembly is a factory-style replacement component designed to restore the original function of the affected subsystem. Use it to replace a damaged or failed assembly and return the appliance to normal operation. What it does

• Replaces the failed factory assembly that controls or supports a specific appliance subsystem.
• Restores mechanical or electrical connections needed for normal operation.
• Common symptom linkage: appliance fails to operate, shows error codes, runs intermittently, or has reduced performance.
• Helps address issues caused by visible damage, burnt connectors, or broken mounting points.

• One parts assembly.

• Disconnect power (and water, if applicable) before beginning any repair.
• Handle connectors and circuit paths carefully to avoid damage; replace any damaged fasteners or wiring.

This water guide directs and supports water flow inside the refrigerator to the dispenser or ice-making path, helping ensure consistent delivery and reducing misdirected leaks. It's a small plastic channel used where tubing or water needs routing. What it does

• Guides and stabilizes the water flow path between the supply tubing and dispenser or ice-maker components
• Helps prevent water from spraying or pooling by keeping the line aligned
• Can stop intermittent leaks caused by misrouted tubing or broken guide clips
• Reduces vibration-related noise by supporting tubing in place

• One water guide

• Disconnect power and turn off the water supply before installing
• Replace only with the exact replacement part; inspect adjacent tubing and seals while open
• Handle the guide gently to avoid cracking the plastic; use basic hand tools only

This is the complete lower dish rack assembly that slides in and out of the bottom of the dishwasher on rollers. It holds plates, pots, pans, and larger items during the wash cycle. Replace this rack assembly if the tines are broken or rusted through, the rack no longer rolls smoothly, or if the coating has worn away causing rust to transfer onto your dishes.

This rubber gasket seals the fill funnel area inside the dishwasher, preventing water from leaking during the fill cycle. It sits between the fill funnel and the tub or dispenser housing to create a watertight seal. Replace this gasket if you notice water leaking beneath or around the dishwasher during operation, or if the old gasket appears cracked, warped, or deteriorated.

Fixes poor cleaning and spotty dishes caused by weak water spray. This dishwasher spray nozzle assembly restores proper water distribution. Moderate DIY.

The Drain Hose Assembly is an OEM component specifically designed for LG dishwashers. It safely directs wash water and waste from the dishwasher to a drain source such as the garbage disposal or vent pipe after each wash cycle.

Causes of failure typically include wear and tear over multiple years of daily use carrying hot, soapy water. Hoses can become weakened from kinking, impact damage or deterioration of plastics from chemical exposure. 

Symptoms of a bad drain hose include:

• Puddles or water leakage from the dishwasher 
• Inability to fully drain all wash water after cycles
• Damp containers inside from standing water issues

This OEM LG part is also compatible with select Sears/Kenmore dishwashers.

This is a replaceable tine row that attaches to the dishwasher dish rack, providing adjustable support to hold plates, bowls, and other items in place during the wash cycle. The tines help keep dishes separated for thorough cleaning and proper water circulation. Replace this part if the tines are broken, bent, or missing, causing dishes to shift or fall during operation.

This sump assembly sits at the base of the dishwasher and includes the drain pump, turbidity sensor, and diverter motor. It serves as the main water collection and circulation hub, directing water through the wash and drain cycles. Replace this assembly if the dishwasher is not draining properly, has poor wash performance, or displays error codes related to the drain pump or water sensor.

This is a small roller that guides the door cable on the left side of the dishwasher. It helps control the tension and movement of the door cable, allowing the dishwasher door to open and close smoothly and stay in position when lowered. Replace this roller if the door drops open too quickly, feels unbalanced, or if you hear grinding or scraping noises when opening or closing the door.

This safety switch assembly replaces a failed door/interlock switch to restore the appliance's ability to detect and respond to door position, helping ensure cycles only run when the door is closed. Fits as a direct replacement for the original switch assembly. What it does:

• Detects door/lid position and prevents operation when the door is open
• Helps stop the motor or heating function if the door is opened mid-cycle
• Commonly replaces units that show no power to controls or won't start with the door closed
• Can address intermittent operation or machines that behave as if the door is open

• Disconnect power before servicing to avoid shock or injury
• Replacement requires access to the door/lid area; basic hand tools needed
• Verify proper wiring orientation and secure connectors before reassembly

Bottom rack assembly for dishwashers. Holds larger pots, pans, and utensils during wash cycles. Replace if rack is cracked, broken, or wheels damaged.