Ldt7797bm Parts

Fix visible cracks or damage to your dishwasher's base enclosure with this lower cover assembly. Houses motor and pump components securely.

Dishes not getting clean or water not spraying properly? This dishwasher nozzle assembly sprays water during wash cycles. Moderately easy DIY repair.

This parts assembly is a direct-replacement assembly used to restore the original mechanical/electrical components it contains so the appliance can operate as designed. It replaces a worn or damaged assembly to help resolve related failures. What it does

• Replaces the factory assembly that houses the appliance's internal components and connections.
• Restores proper component alignment and secure mounting to prevent intermittent faults.
• Addresses symptoms such as failure to operate, unusual noises, loose or damaged internal parts, or intermittent electrical/connectivity issues.
• Works as the factory-specified repair for units showing wear or damage in the affected assembly area.

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock or injury.
• Handle internal components carefully to avoid damage to wiring, connectors, or sensors.
• Follow the OEM service manual and wiring diagrams for correct installation and routing.

This parts assembly is a factory-style replacement component designed to restore the original function of the affected subsystem. Use it to replace a damaged or failed assembly and return the appliance to normal operation. What it does

• Replaces the failed factory assembly that controls or supports a specific appliance subsystem.
• Restores mechanical or electrical connections needed for normal operation.
• Common symptom linkage: appliance fails to operate, shows error codes, runs intermittently, or has reduced performance.
• Helps address issues caused by visible damage, burnt connectors, or broken mounting points.

• One parts assembly.

• Disconnect power (and water, if applicable) before beginning any repair.
• Handle connectors and circuit paths carefully to avoid damage; replace any damaged fasteners or wiring.

This roller assembly supports the dryer drum and helps it turn smoothly, reducing noise and wear. Replacing a worn roller restores quieter operation and proper drum rotation. What it does

• Supports the dryer drum and maintains correct drum alignment while spinning.
• Reduces rubbing, grinding, or squeaking caused by worn drum support.
• Helps prevent uneven drum rotation that can lead to belt wear or poor tumbling.
• Restores smooth drum movement for more efficient drying.

• Disconnect power (and gas supply for gas dryers) before starting any repair.
• Access may require removing the dryer top or front panel; keep track of fasteners and clips.
• Inspect related parts (other rollers, bearing pads, drum glides, and belt) and replace if worn.

This wire rack restores stable support and organization inside your appliance, letting you load items securely and slide them in and out smoothly. It's a direct-fit replacement when the original rack is bent, broken, or missing. What it does:

• Provides stable shelving for cookware, dishes, or internal components depending on application
• Restores smooth sliding and load support when original rack rails or wires are damaged
• Helps prevent items from shifting or contacting internal walls/heating elements
• Commonly replaced when rack wires are bent, rusted, or mounting tabs break

• One replacement wire rack as shown

• Turn off and unplug the appliance (or disconnect power) before starting any repair
• Remove surrounding components or shelves as needed to access mounting points
• Align rack mounting tabs with support slots and seat fully; secure any retainers or clips
• If rust or other damage is present on surrounding supports, inspect and repair to prevent repeat failure

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

Fixes poor cleaning and spotty dishes caused by weak water spray. This dishwasher spray nozzle assembly restores proper water distribution. Moderate DIY.

The Drain Hose Assembly is an OEM component specifically designed for LG dishwashers. It safely directs wash water and waste from the dishwasher to a drain source such as the garbage disposal or vent pipe after each wash cycle.

Causes of failure typically include wear and tear over multiple years of daily use carrying hot, soapy water. Hoses can become weakened from kinking, impact damage or deterioration of plastics from chemical exposure. 

Symptoms of a bad drain hose include:

• Puddles or water leakage from the dishwasher 
• Inability to fully drain all wash water after cycles
• Damp containers inside from standing water issues

This OEM LG part is also compatible with select Sears/Kenmore dishwashers.

This factory-assembled replacement installs in the same location as the original assembly on your appliance. It restores proper fit and operation when the original component is broken, worn, or missing.

• Replaces the complete assembly specified for your model
• Restores correct fit, alignment, or movement of the associated mechanism
• Helps resolve issues caused by cracks, wear, or physical damage in that area
• Match by part number and model for an exact fit

• Disconnect power before servicing; shut off water or gas supply if applicable
• Use your model's parts diagram to confirm location and orientation
• Transfer any mounting hardware or brackets from the original assembly
• Handle sharp edges carefully and verify proper operation before final reassembly

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restore correct alignment and sealing.
• Secures the door assembly and helps prevent gaps that can cause drafts or heat loss.
• Eliminates cosmetic damage like cracks, dents, or warped trim for improved appearance.
• Can reduce rattling or noisy operation caused by a loose or broken frame.

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panels per the service manual to reach mounting screws—keep track of fasteners.
• Handle trim and any attached glass carefully to avoid breakage or injury.

This safety switch assembly replaces a failed door/interlock switch to restore the appliance's ability to detect and respond to door position, helping ensure cycles only run when the door is closed. Fits as a direct replacement for the original switch assembly. What it does:

• Detects door/lid position and prevents operation when the door is open
• Helps stop the motor or heating function if the door is opened mid-cycle
• Commonly replaces units that show no power to controls or won't start with the door closed
• Can address intermittent operation or machines that behave as if the door is open

• Disconnect power before servicing to avoid shock or injury
• Replacement requires access to the door/lid area; basic hand tools needed
• Verify proper wiring orientation and secure connectors before reassembly

The Cover Assembly is an OEM component specifically designed for LG dishwashers. This assembly consists of the outer tub cover and inner mounted components that protect internal mechanisms.

Causes of a bad cover assembly can include cracks, dents, or other physical damage from regular loading and unloading of dishes. Harsh or abrasive cleaners can degrade protective surfaces over time as well. 

Symptoms of a bad cover assembly include:

• Water leaks inside or outside the dishwasher 
• Loose, unstable, or damaged outer tub cover
• Detached or broken mounting clips for inner components

This OEM LG part is also compatible with Sears/Kenmore dishwashers. Replacing the entire cover assembly restores integrity to protect sensitive inside parts. Proper maintenance extends the lifespan of exterior components.
 

This drum roller supports the dryer drum for smooth rotation and quieter operation. Replacing a worn roller helps reduce noise and drum wobble so the dryer runs more reliably. What it does:

• Supports the drum rim and allows the drum to spin smoothly under load
• Reduces squeaks, thumps and vibration caused by worn or damaged rollers
• Helps prevent uneven drum wear and excessive belt stress
• Works as a direct replacement for the factory roller in compatible dryers

• Disconnect power (and gas, if applicable) before beginning any service
• Access the roller per the manufacturer's service instructions (panel/drum removal is typically required)
• Inspect the drum, belt and other rollers/shafts while the unit is open; replace any worn components
• After installation, rotate the drum by hand to ensure smooth movement before reassembly

This refrigerator water filter cartridge helps reduce common impurities and improves the taste and clarity of drinking water and ice. It's a direct-replacement style designed to fit compatible LG refrigerator filter housings. What it does

• Reduces sediment, chlorine taste and odor commonly found in household water supplies
• Helps improve the taste and clarity of ice and dispensed water
• Restores proper filtration when your fridge shows reduced water quality or off-flavors
• Maintains normal water flow when properly installed and not clogged

• Replace with power on and water supply turned on; follow refrigerator manufacturer instructions
• Flush several gallons of water through the filter after installation to remove trapped air and loose carbon fines
• Dispose of used cartridge according to local recycling/disposal rules
• If you continue to experience poor water quality or low flow after installation, check the refrigerator's filter housing and water supply line

Support bracket that secures internal components to the dishwasher chassis. Replace if bracket is cracked, broken, or missing to restore proper alignment.