Le4127w2 Parts

The belt was off of the pulley and the idler wheel was worn out. I replaced the idler pulley and the spring and put the new belt on and the washer is working fine now. Read more

I replaced the belt and the tensioner along with the spring for it. The tensioner c clip was hard to get to. There wasn't much room for my hands. Read more

Removed motor/pump to gain access to hose. Hose could be replaced with out removal of motor but I wanted to install new hose with out any excessive bending and twisting. Found original hose to be to small for hole in tub - not a tight fit. Ordered replacement hose (actual Frigidaire replacement) it fit very snug. I also added some extra flexible rtv to the grove in the hose that attaches to the tub for a more permanent seal. Reinstalled motor/pump and tightened hose clamps on pump. Let set for... Read more

Worked fine. took about 5 minutes to repair. Read more

Found belt tension idler worn down to the bushing, found the drum rollers stiff and hard to turn, found belt worn and starting to crack. Ordered all of these plus front slide pads. Replaced and now feel confident the dryer will run without problems. Absolutely need a pair of snap-ring pliers for this job. I used a high temp grease on the roller shafts, some info on what lubrication is recommended would be good. While dryer is disassembled, clean/vacuum all the lint from the cabinet, motor,... Read more

Was able to narrow the issue down to a thermostat failing. Appliance Parts Pros has fantastic diagrams that allow me to comfortably order the correct part. Read more

I figured it had to be the flume; changed the flume and hose, mounting screws Read more