Lfc2077ost Parts

This lower cover is the front access panel that protects the appliance's internal components and gives the cabinet a finished look. It restores the lower front appearance and shields wiring and assemblies from dust and debris. What it does

• Replaces a cracked, dented, or missing lower front panel to restore protection and appearance
• Covers and protects wiring, hoses, and base components from dust and accidental contact
• Helps reduce drafts and keeps the cabinet interior cleaner
• Common symptom: visible damage, loose panel, or exposed lower components

• Remove power and disconnect the appliance before beginning any work.
• Usually secured with a few screws or clips at the front base; support the panel while removing fasteners to prevent drops.
• Use basic hand tools; avoid forcing clips to prevent cabinet damage.
• If wiring or components are exposed or damaged, inspect and address those issues before reassembly.

This drum support roller helps the dryer drum rotate smoothly and quietly by supporting the drum shaft and reducing friction. Replacing a worn roller restores proper drum movement and reduces noise. What it does:

• Supports the dryer drum shaft so the drum turns evenly during operation
• Prevents metal-on-metal contact that causes squealing, grinding or scraping noises
• Helps maintain correct drum alignment to avoid rubbing or uneven wear
• Works with the dryer's axle and bearing system to enable smooth rotation

• One roller

• Disconnect power and move the dryer to a safe, well-lit work area before starting
• Access requires removing the dryer front or rear panel depending on model
• Inspect the drum shaft, bearing, and idler components and replace any worn parts at the same time
• Wear eye protection and gloves; test the dryer empty after installation to confirm quiet, smooth operation

The Door Switch is an OEM part for LG refrigerators. It is responsible for detecting whether the refrigerator door is open or closed, allowing the appliance to control the interior light and, in some models, the cooling functions accordingly.

Causes of a bad door switch can include wear and tear from frequent use, electrical issues, or physical damage to the switch mechanism. A faulty door switch can lead to improper operation of the refrigerator's light or cooling system, affecting overall performance.

Symptoms of a bad door switch include:

• Interior light not turning on or off properly
• Refrigerator not cooling properly or running continuously
• Door alarm not functioning correctly
• Intermittent or unresponsive switch operation

This OEM LG part is also compatible with Sears/Kenmore.

This is the ice bucket that stores ice dispensed by your refrigerator's ice maker. A cracked, warped, or stuck bin can jam the auger or spill ice, leading to poor dispensing and messy freezers.

• Holds and dispenses harvested ice from the ice maker to the door chute or bin access
• Common failure signs: cracked bucket, ice not dispensing, auger not turning, ice clumping or spilling
• Restores smooth ice dispensing and proper storage in the freezer
• Built to fit the original mounting and drive interface for an easy swap

• Unplug the refrigerator and wear cut-resistant gloves
• Remove the old bin carefully; thaw any ice buildup before transferring
• Inspect the auger drive coupling for wear before installing the new bucket
• Seat the bucket fully so the drive engages; test dispense with a small amount of ice

Door Gasket Assembly restores the door seal to prevent air leaks and help maintain proper temperatures. Replacing a cracked, warped, or torn gasket can reduce frost, moisture, and temperature fluctuations in the compartment. What it does:

• Forms an airtight seal around the door to keep cold air in and warm, humid air out.
• Replaces damaged or deformed gasket material that can cause leaking, frost buildup, puddling, or inconsistent temperatures.
• Helps the appliance run more efficiently by reducing excessive compressor run-time caused by air infiltration.
• Seats into the door channel and seals when the door is fully closed to protect stored contents.

• Disconnect power to the appliance (and shut off water supply if applicable) before starting any work.
• Remove the old gasket, thoroughly clean the door-mating surface, then align and press the new gasket into the channel working around the full perimeter for even seating.
• Some gaskets use mounting clips, screws, or adhesive; retain original hardware and follow the model-specific service instructions if present.

This replacement refrigerator door gasket forms a tight seal between the door and cabinet to keep cold air in and moisture out. Restores proper sealing to help maintain temperatures, reduce frost/condensation, and improve efficiency when the old gasket is worn. What it does:

• Seals the door perimeter to limit air leaks between the door and cabinet
• Helps maintain stable internal temperatures and reduce energy waste
• Minimizes condensation, moisture, and frost around the door opening
• Common failure signs: tears, cracks, warping, gaps, persistent condensation, or doors not sealing properly

• 1 door gasket

• Unplug the refrigerator before servicing.
• Remove door bins/shelves for access. Pull the old gasket from the retainer/channel and clean the mounting surface.
• Warm the new gasket (hot water or low-heat hair dryer) to relax folds. Seat corners first, then press along the sides until fully engaged. On some models, slightly loosen retainer screws; do not overtighten.
• Close the door and check for an even seal all around (paper-slip test). Adjust and reshape as needed.

This connector secures and transmits motion between the drawer drive and the sliding assembly, restoring smooth drawer movement and alignment. It's a direct-fit replacement that helps fix sticking, slipping, or non-moving drawers. What it does:

• Couples the drawer drive mechanism to the sliding gear, allowing the drawer to open and close reliably
• Replaces worn or broken connector teeth or mounts that cause skipping or jammed operation
• Helps correct uneven or noisy drawer movement caused by damaged linkage
• Restores proper engagement so the drawer responds to normal open/close controls

• One connector as shown

• Disconnect power to the appliance before servicing to avoid electrical shock or injury
• Inspect surrounding gears, tracks, and mounting points; replace any damaged parts for best results
• Basic hand tools are typically required; handle plastic gears carefully to avoid further damage

This center hinge assembly replaces the refrigerator door center hinge to restore proper door alignment and smooth operation. It supports the door weight and helps maintain correct sealing for reliable cooling performance. What it does:

• Supports the center of the door, keeping it aligned and preventing sagging
• Provides the pivot point for smooth opening and closing
• Helps maintain a consistent door seal to prevent cool-air loss
• Can eliminate shifting, squeaking, or uneven door gaps caused by a worn hinge

• 1 center hinge assembly

• Disconnect power and empty or support the door before removing the hinge
• Use appropriate tools and a second person to safely support the door during replacement
• Inspect adjoining hinges and mounting hardware; replace any damaged fasteners for best results

This replacement drawer tray restores a refrigerator's internal storage surface so food items sit level and the drawer operates smoothly. It provides a clean, durable surface for organizing produce and deli items. What it does:

• Replaces a cracked, warped, or missing drawer tray to restore proper support for stored items
• Helps keep contents contained and prevents spills from spreading to lower compartments
• Fits into the drawer assembly to maintain smooth sliding and alignment
• Reduces odor and moisture transfer by providing an easy-to-clean surface

• Remove food and empty drawer before installing; handle on a stable surface
• Slide old tray out gently, then set new tray into the drawer track until it seats fully
• No special tools typically required;
• Disconnect power to the appliance before performing any deep repairs or if working near electrical components

This cover cap is a small plastic trim piece that protects exposed fasteners and improves the appliance's appearance. It snaps into place to hide mounting posts and help prevent snags or debris buildup. What it does:

• Covers and protects exposed screws, posts, or fasteners for a finished look
• Prevents lint, dust, and debris from collecting around the mounting point
• Reduces the chance of fabric snags or contact with sharp edges
• Restores worn or missing trim for improved cosmetics

• Disconnect power to the appliance before starting any service that exposes electrical components
• Usually installs by snapping over the post or press-fitting into the trim opening — no special tools required
• If needed, remove adjacent trim pieces to gain access, then reinstall trim in reverse order
• Inspect surrounding mounting hardware for damage and replace if necessary