Lfc22770 Parts

The Main Power Control Board is an OEM part specifically designed for LG refrigerator units. As the primary control interface, it regulates power distribution to refrigeration systems and temperature control circuits.

Symptoms of a bad Main Power Control Board include:

• Erratic cooling with inconsistent temperatures between compartments  
• Abnormal noises or vibrations sounding from inside walls
• Malfunctions with features like ice/water dispensing

Causes can be the gradual breakdown of electronic pathways from long-term use. Accidental water damage can risk short-circuiting over time as well. 

Replacing with this genuine LG board resurrects the full intended operation. Robust circulation and precise refrigeration are restored to keep foods fresher for longer. This replacement ensures continued convenience with integrated accessory functions too. It fits Sears/Kenmore refrigerators also.

This door gasket assembly replaces a worn or damaged refrigerator door seal to help maintain an airtight closure and consistent cooling. Restores proper sealing to reduce frost buildup and improve temperature control. What it does:

• Creates an airtight seal around the refrigerator door to keep cold air in and warm air out
• Helps prevent frost and moisture buildup inside the compartment
• Reduces strain on the compressor by improving energy efficiency when sealing is restored
• Common symptom: visible cracks, tears, gaps, or a door that fails to close tightly

• Disconnect power to the appliance before beginning any repairs
• Remove the old gasket carefully to avoid damaging the door finish or retainer; warm or softening the gasket can ease removal
• Align the new gasket evenly and press into the retainer; some models use screws or clips

A replacement glide rail assembly that supports and guides a refrigerator/freezer drawer for smooth opening and closing. Restores proper drawer tracking and helps prevent sticking or misalignment. What it does:

• Provides the rail and mounting components that the drawer slides on for stable operation
• Restores smooth drawer movement and alignment when original rail is bent or worn
• Helps reduce drawer sticking, scraping, or uneven travel
• Intended for use where the OEM glide/rail assembly is specified

• One glide rail assembly

• Follow the appliance manufacturer's service manual for removal and installation steps
• Disconnect power and empty the drawer before working to prevent injury or damage
• Inspect mounting hardware and drawer slides; replace any damaged fasteners
• Use basic hand tools;

This guide assembly rail replaces a worn or damaged drawer slide to restore smooth, stable drawer movement and proper alignment. It helps reduce sticking, misalignment, and rattling for a secure fit and quiet operation. What it does:

• Guides and supports the drawer or compartment during open/close cycles
• Restores smooth sliding action and consistent alignment
• Reduces noise caused by worn or bent rails or guides
• Helps prevent drawers from catching or binding

• Disconnect power and empty the drawer before beginning service
• Removal of the drawer and access panel may be required; keep fasteners for reassembly
• Align the rail before tightening fasteners; use basic hand tools

This front plate assembly is the exterior cover that protects and finishes the front of the appliance panel while keeping internal components secure and aligned. It restores the appliance's appearance and helps maintain proper operation. What it does:

• Covers and protects controls, brackets, and internal components located at the front of the appliance
• Replaces cracked, bent, or cosmetically damaged front plate panels
• Helps prevent debris and moisture from reaching internal parts that can cause malfunctions
• Restores a clean, finished look to the appliance front

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle the part carefully to avoid scratching or damaging the finish during installation
• Installation may require removal of adjacent trim or control panel components; keep fasteners organized

This genuine door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight closure and help maintain proper temperature. It's a direct-fit replacement that keeps cold air in and warm air out for better cooling performance. What it does:

• Seals the refrigerator door edge to prevent air leaks and reduce frost buildup
• Helps maintain consistent internal temperatures for food safety
• Reduces excessive compressor run time caused by a failing seal
• Stops drafts and moisture intrusion that can cause ice or condensation

• One door gasket assembly as shown

• Unplug the appliance before starting any work and remove any items from the door
• Peel out the old gasket and clean the gasket channel before installing the new seal
• Fit the gasket into the channel, working around the door so the seal seats evenly; warm water or a hair dryer may help soften the gasket for easier installation (use low heat)
• Check the door swing and seal around the perimeter after installation

The Drain Tube Assembly is an OEM part for LG refrigerators. This drain tube assembly is responsible for directing condensation and melt water that accumulates in the refrigerator away to the evaporator pan.

Causes can include cracks developing from limescale or mineral accumulation, flexing fatigue from repeatedly catching drips, or damage from improper cleaning methods.

Symptoms of a bad drain tube assembly include:

• Puddles or leaks developing underneath the refrigerator
• Poor air flow from vents and higher temperatures
• Ice or moisture buildup in refrigerator walls and seals
• Water stains or corrosion appearing inside the unit

This OEM LG part is also compatible with some Kenmore models.

This replacement decor tray is the exterior trim panel that restores the finished look of the appliance and covers the underlying components for a clean, factory appearance. It's a direct-fit cosmetic part. What it does:

• Replaces a cracked, scratched or missing exterior trim piece to restore appearance
• Covers and protects control-area edges and hardware from everyday wear
• Helps keep the front of the appliance looking flush and factory-finished
• Fits into the surrounding trim and secures with existing fasteners or clips

• Disconnect power to the appliance before starting any work.
• Installation typically uses the existing clips or screws; handle trim gently to avoid scratching.
• Use the appliance service manual or parts diagram for correct removal/installation steps.
• If fasteners are damaged or missing, replace them with OEM-specified hardware.

This fan grille assembly directs airflow and protects the appliance fan while maintaining proper ventilation for cooling performance. It replaces a damaged or cracked grille to help reduce restricted airflow and rattling noises. What it does:

• Guides and channels air from the fan to improve circulation within the appliance
• Helps protect the fan blades from debris and accidental contact
• Reduces vibration-related noise caused by a broken or loose grille
• Restores a finished appearance to the fan area and helps maintain proper airflow paths

• One fan grille assembly as shown

• Disconnect power to the appliance before beginning any service
• Secure with clips or screws; retain fasteners and note their locations during removal
• Handle the grille gently to avoid cracking plastic tabs; align tabs before snapping into place
• If other components are damaged, inspect surrounding area and replace as needed

This door gasket assembly creates an airtight seal around the refrigerator door to help maintain proper temperature and energy efficiency. A worn or damaged gasket can cause cold air loss and inconsistent cooling. What it does:

• Seals the refrigerator door to keep cold air in and warm air out
• Helps prevent frost buildup and condensation inside the compartment
• Reduces compressor run-time by maintaining a stable internal temperature
• Commonly replaced when you notice air leaks, visible cracks, gaps, or persistent moisture at the door edge

• One door gasket assembly

• Disconnect power to the appliance before beginning any repair
• Remove the door trim or inner panel if required to access the gasket mounting channel
• Work around the perimeter to release the old gasket and seat the new gasket fully into the gasket channel for a uniform seal
• Inspect hinge and latch alignment after installation; adjust as needed to ensure proper door closure

This door gasket assembly replaces the flexible seal that creates an airtight closure around a refrigerator door, helping maintain proper cooling and reduce energy loss. Fits as the factory-style replacement for damaged, torn, or hardened seals. What it does:

• Seals the door edge to keep cold air in and warm air out, supporting consistent internal temperatures.
• Helps prevent frost buildup and excessive cycling that can result from a leaking door seal.
• Restores a firm, even seal when the original gasket is warped, cracked, or no longer flexible.

• One complete door gasket assembly.

• High-level replacement; usually requires removing the old gasket and pressing the new gasket into the door channel—keep hands clear of sharp edges.
• Check that the gasket is fully seated along the entire perimeter before testing; warm the gasket with a hair dryer briefly to help it conform if needed.
• Disconnect power or follow appliance safety procedures when working around electrical components.
• If the gasket attaches with screws or retainers, keep them and reinstall in the same locations; replace any damaged fasteners separately.

This genuine replacement knob shutter restores the control panel's knob opening and protects internal switches from debris while allowing knobs to engage properly. It helps maintain smooth knob operation and reduces dirt buildup behind the control surface. What it does:

• Covers the knob opening and guides the control knob into place for reliable engagement
• Protects internal switches and electronics from dust, crumbs, and spills
• Helps prevent accidental knob movement when not in use
• Restores proper fit and appearance of the control panel area

• One knob shutter

• Power off and unplug the appliance before beginning any work to avoid electrical shock
• Small fasteners or clips may need to be removed; use appropriate hand tools and keep track of hardware

This door foam assembly replaces the insulation layer inside a refrigerator door to restore thermal sealing and reduce condensation. It helps maintain proper cabinet temperature and supports energy-efficient operation when the original foam is damaged or compressed. What it does:

• Replaces worn or damaged door insulation to improve temperature retention
• Helps reduce door sweating and moisture buildup that can lead to mold or odors
• Supports consistent cooling performance by restoring the door's insulating barrier
• Fits into the inner door cavity and works with existing door panels and liners

• One door foam assembly

• Recommended for repair by someone familiar with appliance disassembly; your model's service manual for exact steps
• Power off and empty the door before starting; remove shelves and hardware as needed to access the foam
• Avoid puncturing or compressing the foam during install; handle gently to preserve insulating properties
• If adhesive or clips are used, ensure proper alignment and secure fastening per OEM guidance

This is a replacement door gasket assembly that restores the refrigerator door's airtight seal to help maintain proper temperatures and reduce energy loss. Use this OEM-style seal to replace torn, misshapen, or hardened door seals. What it does:

• Replaces the refrigerator door seal to help maintain a tight refrigeration seal
• Helps prevent warm air, moisture, and odors from entering the compartment
• Commonly used when the gasket is cracked, warped, or no longer rests flush
• Helps the appliance run more efficiently by reducing temperature fluctuations

• One door gasket assembly

• Disconnect power to the appliance before beginning any repair
• Gasket usually installs by tucking or fastening around the door flange; refer to your service manual for the exact procedure
• Inspect the door frame and mounting channel for damage or debris before installing the new gasket

This front plate assembly replaces a damaged or worn front trim piece to restore a clean appearance and secure adjacent components. It's a direct-fit exterior plate used where visible damage, gaps, or loosened trim occur. What it does

• Covers and protects the appliance's front area, preventing dust and debris from entering internal spaces
• Secures adjacent panels and trim so doors and controls align correctly
• Restores finished appearance when the original plate is scratched, dented, or cracked
• Reduces rattling or vibration caused by loose or broken trim

• One front plate assembly as shown

• Basic panel removal and reattachment required; keep fasteners organized for reinstallation
• Disconnect power or follow manufacturer safety instructions before servicing near electrical components
• Handle painted or plated surfaces carefully to avoid scratches during installation
• Replace with manufacturer-specified fasteners

This drawer guide is the replacement rail that helps a freezer or refrigerator drawer open and close smoothly, restoring proper alignment and reducing sticking or grinding during use. Designed to match OEM fit and function. What it does:

• Guides the drawer along its track to ensure smooth, even movement
• Keeps the drawer aligned to prevent binding, rubbing, or tipping
• Reduces noise from scraping or catching when opening or closing
• Helps restore proper drawer seating and overall compartment accessibility

• One drawer guide (rail) as shown

• Inspect mating track and adjacent hardware for damage before installing
• Remove power or follow manufacturer safety guidance for accessing interior components
• Install with original fasteners; tighten securely but avoid over-torquing
• If multiple guides are worn or damaged, replace matching guides on the other side for best performance