Lfc25570 Parts

This door gasket assembly replaces a worn or damaged refrigerator door seal to help restore a tight seal and maintain proper cooling. It fits the full door perimeter and helps reduce leaks, frost and temperature loss. What it does

• Replaces a damaged or torn door seal to restore an airtight closure
• Helps stop cold air from escaping and warm, moist air from entering
• Reduces frost buildup and helps the fridge maintain set temperature
• Can improve energy efficiency by preventing unnecessary compressor runtime

What's included

• One complete door gasket assembly as shown

Install notes

• Replace only when the door is cool and unplugged; follow OEM instructions for proper seating
• Clean the door flange before installing to ensure a full seal
• Use care to avoid stretching or pinching the gasket during installation

This Vegetable Tray Assembly replaces the fridge crisper tray to restore storage for fruits and vegetables and keep produce organized. Durable replacement tray helps contain spills and provides a stable surface for your produce drawer. What it does:

• Replaces a cracked, broken, or warped crisper tray so the drawer can hold produce securely
• Helps contain leaks and spills to make cleanup easier
• Restores proper support and alignment for the crisper/drawer system
• Useful when the original tray is missing, damaged, or no longer seating correctly

• One vegetable tray assembly

• Slide the old tray out and set the new tray into the same guides; no special tools typically required
• Inspect drawer rails and rollers for damage before installing; replace any broken guides separately
• Handle plastic parts carefully to avoid cracking; wear gloves if needed
• Unplug the appliance or turn off power before performing repairs that require interior access

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore an airtight closure and help maintain proper cooling. It fits the door's perimeter and creates the seal between the cabinet and door. What it does:

• Seals the refrigerator door to retain cold air and improve temperature stability.
• Prevents warm air intrusion that can cause frost buildup or increased energy use.
• Helps reduce condensation and water leaks around the door area.
• Restores proper door alignment and closing when old gasket is torn, stretched, or deformed.

• Unplug the appliance and remove food from the door area before starting.
• Work with the door propped or supported; follow OEM removal steps for existing gasket tabs or clips.
• Gently warm and flex the new gasket if needed for easier seating; avoid sharp tools that can puncture it.
• After installation, check the seal around the full perimeter and allow a short run cycle to verify proper operation.

This Tray Cover Assembly replaces a damaged or worn cover for the appliance tray, protecting contents and restoring proper tray function. It helps keep the tray sealed and aligned so the appliance operates as intended. What it does:

• Replaces a broken, cracked, or warped tray cover to restore proper tray protection
• Helps prevent spills or exposure of tray contents during normal use
• Ensures the tray sits and seals correctly to reduce rattling or misalignment
• Matches OEM fit and form for straightforward replacement when the original is damaged

• One Tray Cover Assembly as shown

• Designed to snap or fasten into place; follow your model's service manual for exact removal and installation steps
• Disconnect power or follow safety guidance for your appliance before beginning repair
• Inspect surrounding tray parts and fasteners for damage and replace if needed

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight closure and help maintain proper internal temperature. It fits the specified LG door opening and restores the cabinet-to-door seal. What it does:

• Seals the door perimeter to prevent warm air intrusion and reduce frost build-up.
• Helps maintain consistent internal temperature for food safety and efficient cooling.
• Reduces condensation and moisture that can lead to odor or spoilage.
• Addresses common symptoms like visible tears, gaps, or poor door closure.

• High-level replacement: remove the old gasket, clean the door channel, and press the new gasket into the retainer groove following the OEM pattern.
• Inspect the door frame and retainer for damage before installing; a warped frame can prevent a proper seal.
• Use gentle heat only if needed to ease seating; avoid open flames or excessive heat.
• Disconnect power to the appliance or follow manufacturer safety instructions if removing doors or working near electrical components.

This guide assembly secures and aligns internal TV components to keep the display and front panel stable during use. Replacing a damaged guide restores proper fit and reduces movement or rubbing that can affect the screen or bezel. What it does:

• Positions and supports the TV panel and adjacent internal parts for correct alignment
• Prevents panel flex, rubbing, and audible rattles caused by loose or broken guides
• Helps maintain an even bezel-to-screen gap and proper front-panel fit
• Restores mechanical stability after impacts or wear that crack or deform the original guide

• One guide assembly part as shown

• Disconnect power and fully remove the TV from its mount before starting
• Partial disassembly of the cabinet and removal of the front bezel/panel is typically required
• Handle the LCD/OLED panel carefully to avoid pressure marks or damage during installation
• Use the OEM fasteners and follow service manual orientation; test fit before final reassembly

This hinge assembly replaces a worn or damaged refrigerator door hinge to restore proper door alignment and smooth opening and closing. It helps stop sagging doors, noisy movement, and improper sealing for better cooling performance. What it does:

• Supports and pivots the refrigerator door for correct alignment and even sealing
• Replaces broken, bent, or worn hinge hardware that causes door sag or misalignment
• Reduces rubbing, grinding, or noisy hinge movement when opening or closing
• Helps restore proper door closure to prevent cold air loss and temperature issues

• Unplug the appliance and support the door before removing hinge hardware to prevent injury or damage
• Transfer any mounting screws or brackets only if specified by the OEM; replace visibly damaged fasteners
• Tighten mounting fasteners to secure the hinge but avoid over-torquing; confirm door alignment after installation

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This is a factory-style screw used to secure components and panels on compatible LG appliances. It restores proper fit and reduces movement where a missing or stripped screw causes parts to sit loose. What it does:

• Fastens panels, brackets, or trim to appliance chassis to restore secure attachment
• Stops rattling or vibration caused by loose or missing fasteners
• Helps maintain proper alignment of removable parts for safe operation
• Serves as a direct replacement when the original screw is lost or damaged

• Screw

• Use the matching screwdriver or driver bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent damage to threads or plastic parts
• Replace only with the specified OEM screw to ensure fit and function
• Disconnect power to the appliance before accessing internal components when applicable

This is a replacement mounting screw used to secure appliance panels, trim or components. It restores proper attachment to reduce vibration and rattling and helps keep removable parts firmly in place during operation. What it does:

• Fastens panels, brackets or trim pieces to the appliance frame
• Restores secure fit when original screw is missing, loose, or stripped
• Reduces rattling and vibration caused by loose hardware
• Helps maintain proper alignment of removable covers and control panels

• Disconnect power and water before starting any repair
• Verify size and thread match the original screw before installation
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten — overtightening can strip threads or crack plastic parts
• Keep small parts away from children and pets

This replacement door handle restores a secure grip and proper door operation on compatible refrigerators. Durable and contoured to match factory styling, it replaces cracked, loose, or broken handles for a safer, finished look. What it does:

• Provides a firm, ergonomic grip to open and close the refrigerator door
• Replaces cracked, damaged, or loose handles that affect door usability
• Restores the appliance's factory appearance and user comfort
• Helps prevent further damage from using a compromised handle

• Power off and unplug the appliance or disconnect power at the breaker before installation to avoid electrical risk
• Use appropriate hand tools; support the door during removal/installation to prevent injury or damage
• Follow the manufacturer service manual or on-page model fitment for proper screw locations and torque

This is a replacement mounting bracket that secures internal appliance components to the cabinet frame, restoring proper alignment and support for moving parts. It helps reduce vibration and prevents loose or sagging assemblies. What it does:

• Provides a stable mounting point for internal components to maintain correct positioning
• Helps stop rattling, knocking, or vibration caused by loose fittings
• Restores support for panels, assemblies, or mechanical linkages that rely on the bracket
• Useful when original bracket is bent, cracked, or otherwise damaged

• Follow manufacturer service manual for correct placement and fastener torque
• Use proper tools and retain all screws/fasteners; replace damaged fasteners as needed
• Disconnect power before accessing internal components to avoid shock or injury

This motor bracket is the OEM-style mounting bracket that secures the appliance motor to the cabinet, keeping the motor aligned and reducing vibration for reliable operation. It helps restore proper motor support and stable running. What it does:

• Provides a secure mounting point to hold the motor in correct position
• Maintains motor alignment to prevent belt slip and uneven wear
• Reduces vibration and noise caused by a loose or damaged motor mount
• Can resolve symptoms such as unusual motor noise, excessive vibration, or motor movement during operation

• Disconnect power (and gas if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance service manual for access steps
• Inspect surrounding components (mounting fasteners, motor and belts) and replace any damaged parts