Lfc25765 Parts

A replacement door gasket assembly that seals the refrigerator door to help maintain internal temperature and reduce energy loss. Restores a proper door seal to help keep food fresher and reduce cooling strain. What it does:

• Forms a tight seal around the refrigerator door to minimize cold-air loss and help maintain set temperatures.
• Helps prevent frost buildup and condensation inside the fresh-food compartment when the seal is compromised.
• Can reduce cycling frequency and excessive run time caused by a damaged or worn door seal.
• Common symptoms of a failing gasket: visible gaps, cold spots, frost or ice buildup, or condensation on the door edges.

• Disconnect power to the appliance before starting any repair.
• Remove food and door-mounted items as needed for safe access and handling.
• Align the gasket into the door channel, working it evenly around the perimeter so it seats fully; some distortion may correct after a short run time.

This connector secures and transmits motion between the drawer drive and the sliding assembly, restoring smooth drawer movement and alignment. It's a direct-fit replacement that helps fix sticking, slipping, or non-moving drawers. What it does:

• Couples the drawer drive mechanism to the sliding gear, allowing the drawer to open and close reliably
• Replaces worn or broken connector teeth or mounts that cause skipping or jammed operation
• Helps correct uneven or noisy drawer movement caused by damaged linkage
• Restores proper engagement so the drawer responds to normal open/close controls

• One connector as shown

• Disconnect power to the appliance before servicing to avoid electrical shock or injury
• Inspect surrounding gears, tracks, and mounting points; replace any damaged parts for best results
• Basic hand tools are typically required; handle plastic gears carefully to avoid further damage

This cover cap is a small plastic trim piece that protects exposed fasteners and improves the appliance's appearance. It snaps into place to hide mounting posts and help prevent snags or debris buildup. What it does:

• Covers and protects exposed screws, posts, or fasteners for a finished look
• Prevents lint, dust, and debris from collecting around the mounting point
• Reduces the chance of fabric snags or contact with sharp edges
• Restores worn or missing trim for improved cosmetics

• Disconnect power to the appliance before starting any service that exposes electrical components
• Usually installs by snapping over the post or press-fitting into the trim opening — no special tools required
• If needed, remove adjacent trim pieces to gain access, then reinstall trim in reverse order
• Inspect surrounding mounting hardware for damage and replace if necessary

This replacement door gasket assembly seals the refrigerator door to help maintain proper temperature and reduce energy loss. It restores the seal around the door edge for better cooling performance and food preservation. What it does:

• Creates an airtight seal around the refrigerator door to limit cold air escape
• Helps maintain consistent internal temperature for food safety
• Reduces frost buildup and excessive compressor run time when working properly
• Addresses symptoms such as warm spots near the door, visible gaps, or persistent condensation

• One door gasket assembly

• Inspect the door and mounting channel for debris before installing; clean with mild detergent and dry completely
• Gasket typically stretches into a channel and secures around the door perimeter—avoid sharp tools that can damage the seal
• For best results, install at room temperature; warm the gasket gently if needed to ease fitting

This replacement door basket mounts on the refrigerator door to hold bottles, jars, and condiments. It restores secure, easy-access storage when the original bin is cracked, damaged, or missing.

• Attaches to the inner door rails to organize items on the door
• Keeps contents in place as the door opens and closes
• Replaces a cracked, broken, warped, or missing bin
• Symptoms include broken tabs, bin won't stay seated, or reduced door storage

• Remove items from the old bin; lift up to release it from the door rails
• Align the new basket's hooks with the door slots and lower until fully seated
• Confirm the bin is level and secure before loading
• No tools typically required; avoid overloading to prevent damage

This door gasket assembly replaces a worn or damaged refrigerator door seal to help restore a tight seal and maintain proper cooling. It fits the full door perimeter and helps reduce leaks, frost and temperature loss. What it does

• Replaces a damaged or torn door seal to restore an airtight closure
• Helps stop cold air from escaping and warm, moist air from entering
• Reduces frost buildup and helps the fridge maintain set temperature
• Can improve energy efficiency by preventing unnecessary compressor runtime

What's included

• One complete door gasket assembly as shown

Install notes

• Replace only when the door is cool and unplugged; follow OEM instructions for proper seating
• Clean the door flange before installing to ensure a full seal
• Use care to avoid stretching or pinching the gasket during installation

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore an airtight closure and help maintain proper cooling. It fits the door's perimeter and creates the seal between the cabinet and door. What it does:

• Seals the refrigerator door to retain cold air and improve temperature stability.
• Prevents warm air intrusion that can cause frost buildup or increased energy use.
• Helps reduce condensation and water leaks around the door area.
• Restores proper door alignment and closing when old gasket is torn, stretched, or deformed.

• Unplug the appliance and remove food from the door area before starting.
• Work with the door propped or supported; follow OEM removal steps for existing gasket tabs or clips.
• Gently warm and flex the new gasket if needed for easier seating; avoid sharp tools that can puncture it.
• After installation, check the seal around the full perimeter and allow a short run cycle to verify proper operation.

This Tray Cover Assembly replaces a damaged or worn cover for the appliance tray, protecting contents and restoring proper tray function. It helps keep the tray sealed and aligned so the appliance operates as intended. What it does:

• Replaces a broken, cracked, or warped tray cover to restore proper tray protection
• Helps prevent spills or exposure of tray contents during normal use
• Ensures the tray sits and seals correctly to reduce rattling or misalignment
• Matches OEM fit and form for straightforward replacement when the original is damaged

• One Tray Cover Assembly as shown

• Designed to snap or fasten into place; follow your model's service manual for exact removal and installation steps
• Disconnect power or follow safety guidance for your appliance before beginning repair
• Inspect surrounding tray parts and fasteners for damage and replace if needed