Lfc2576st Parts

This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:

• Holds a cover, panel, or door-related component in proper position to prevent shifting
• Reduces noise caused by loose or vibrating parts
• Restores original fit where a broken or missing clip allows movement
• Simple mechanical function — no electrical connections or calibration

• One restrainer

• Disconnect power (and water if applicable) before beginning repairs
• Inspect surrounding mounting points for damage; replace any broken tabs or fasteners
• Typically installs with basic hand tools; align clip and press or snap into place until secure

This Supporter, Cover TV is the structural bracket that supports and secures an appliance cover/panel. Replacing a cracked or bent supporter restores a snug, quiet fit and keeps the cover properly aligned with the cabinet.

• Supports and anchors the specified cover/panel to the frame
• Helps maintain alignment and reduce cabinet vibration or rattling
• Restores stable mounting when the original support is cracked, warped, or missing
• Symptoms include a loose or uneven cover, gaps, or noise during operation

• Disconnect power and allow moving parts to stop before servicing
• Support the cover while removing the old bracket to prevent damage
• Reuse original screws/fasteners and transfer any clips or insulators as needed
• Do not overtighten fasteners, especially into plastic mounting tabs

This replacement door basket mounts on the refrigerator door to hold bottles, jars, and condiments. It restores secure, easy-access storage when the original bin is cracked, damaged, or missing.

• Attaches to the inner door rails to organize items on the door
• Keeps contents in place as the door opens and closes
• Replaces a cracked, broken, warped, or missing bin
• Symptoms include broken tabs, bin won't stay seated, or reduced door storage

• Remove items from the old bin; lift up to release it from the door rails
• Align the new basket's hooks with the door slots and lower until fully seated
• Confirm the bin is level and secure before loading
• No tools typically required; avoid overloading to prevent damage

This door gasket assembly replaces a worn or damaged refrigerator door seal to help restore a tight seal and maintain proper cooling. It fits the full door perimeter and helps reduce leaks, frost and temperature loss. What it does

• Replaces a damaged or torn door seal to restore an airtight closure
• Helps stop cold air from escaping and warm, moist air from entering
• Reduces frost buildup and helps the fridge maintain set temperature
• Can improve energy efficiency by preventing unnecessary compressor runtime

What's included

• One complete door gasket assembly as shown

Install notes

• Replace only when the door is cool and unplugged; follow OEM instructions for proper seating
• Clean the door flange before installing to ensure a full seal
• Use care to avoid stretching or pinching the gasket during installation

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore an airtight closure and help maintain proper cooling. It fits the door's perimeter and creates the seal between the cabinet and door. What it does:

• Seals the refrigerator door to retain cold air and improve temperature stability.
• Prevents warm air intrusion that can cause frost buildup or increased energy use.
• Helps reduce condensation and water leaks around the door area.
• Restores proper door alignment and closing when old gasket is torn, stretched, or deformed.

• Unplug the appliance and remove food from the door area before starting.
• Work with the door propped or supported; follow OEM removal steps for existing gasket tabs or clips.
• Gently warm and flex the new gasket if needed for easier seating; avoid sharp tools that can puncture it.
• After installation, check the seal around the full perimeter and allow a short run cycle to verify proper operation.

This Tray Cover Assembly replaces a damaged or worn cover for the appliance tray, protecting contents and restoring proper tray function. It helps keep the tray sealed and aligned so the appliance operates as intended. What it does:

• Replaces a broken, cracked, or warped tray cover to restore proper tray protection
• Helps prevent spills or exposure of tray contents during normal use
• Ensures the tray sits and seals correctly to reduce rattling or misalignment
• Matches OEM fit and form for straightforward replacement when the original is damaged

• One Tray Cover Assembly as shown

• Designed to snap or fasten into place; follow your model's service manual for exact removal and installation steps
• Disconnect power or follow safety guidance for your appliance before beginning repair
• Inspect surrounding tray parts and fasteners for damage and replace if needed

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight closure and help maintain proper internal temperature. It fits the specified LG door opening and restores the cabinet-to-door seal. What it does:

• Seals the door perimeter to prevent warm air intrusion and reduce frost build-up.
• Helps maintain consistent internal temperature for food safety and efficient cooling.
• Reduces condensation and moisture that can lead to odor or spoilage.
• Addresses common symptoms like visible tears, gaps, or poor door closure.

• High-level replacement: remove the old gasket, clean the door channel, and press the new gasket into the retainer groove following the OEM pattern.
• Inspect the door frame and retainer for damage before installing; a warped frame can prevent a proper seal.
• Use gentle heat only if needed to ease seating; avoid open flames or excessive heat.
• Disconnect power to the appliance or follow manufacturer safety instructions if removing doors or working near electrical components.

This guide assembly secures and aligns internal TV components to keep the display and front panel stable during use. Replacing a damaged guide restores proper fit and reduces movement or rubbing that can affect the screen or bezel. What it does:

• Positions and supports the TV panel and adjacent internal parts for correct alignment
• Prevents panel flex, rubbing, and audible rattles caused by loose or broken guides
• Helps maintain an even bezel-to-screen gap and proper front-panel fit
• Restores mechanical stability after impacts or wear that crack or deform the original guide

• One guide assembly part as shown

• Disconnect power and fully remove the TV from its mount before starting
• Partial disassembly of the cabinet and removal of the front bezel/panel is typically required
• Handle the LCD/OLED panel carefully to avoid pressure marks or damage during installation
• Use the OEM fasteners and follow service manual orientation; test fit before final reassembly

This hinge assembly replaces a worn or damaged refrigerator door hinge to restore proper door alignment and smooth opening and closing. It helps stop sagging doors, noisy movement, and improper sealing for better cooling performance. What it does:

• Supports and pivots the refrigerator door for correct alignment and even sealing
• Replaces broken, bent, or worn hinge hardware that causes door sag or misalignment
• Reduces rubbing, grinding, or noisy hinge movement when opening or closing
• Helps restore proper door closure to prevent cold air loss and temperature issues

• Unplug the appliance and support the door before removing hinge hardware to prevent injury or damage
• Transfer any mounting screws or brackets only if specified by the OEM; replace visibly damaged fasteners
• Tighten mounting fasteners to secure the hinge but avoid over-torquing; confirm door alignment after installation

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This is a factory-style screw used to secure components and panels on compatible LG appliances. It restores proper fit and reduces movement where a missing or stripped screw causes parts to sit loose. What it does:

• Fastens panels, brackets, or trim to appliance chassis to restore secure attachment
• Stops rattling or vibration caused by loose or missing fasteners
• Helps maintain proper alignment of removable parts for safe operation
• Serves as a direct replacement when the original screw is lost or damaged

• Screw

• Use the matching screwdriver or driver bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent damage to threads or plastic parts
• Replace only with the specified OEM screw to ensure fit and function
• Disconnect power to the appliance before accessing internal components when applicable

This is a replacement mounting screw used to secure appliance panels, trim or components. It restores proper attachment to reduce vibration and rattling and helps keep removable parts firmly in place during operation. What it does:

• Fastens panels, brackets or trim pieces to the appliance frame
• Restores secure fit when original screw is missing, loose, or stripped
• Reduces rattling and vibration caused by loose hardware
• Helps maintain proper alignment of removable covers and control panels

• Disconnect power and water before starting any repair
• Verify size and thread match the original screw before installation
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten — overtightening can strip threads or crack plastic parts
• Keep small parts away from children and pets