Lfcs22520s/102 Parts

The Main Power Control Board is an OEM part specifically designed for LG refrigerator units. As the primary control interface, it regulates power distribution to refrigeration systems and temperature control circuits.

Symptoms of a bad Main Power Control Board include:

• Erratic cooling with inconsistent temperatures between compartments  
• Abnormal noises or vibrations sounding from inside walls
• Malfunctions with features like ice/water dispensing

Causes can be the gradual breakdown of electronic pathways from long-term use. Accidental water damage can risk short-circuiting over time as well. 

Replacing with this genuine LG board resurrects the full intended operation. Robust circulation and precise refrigeration are restored to keep foods fresher for longer. This replacement ensures continued convenience with integrated accessory functions too. It fits Sears/Kenmore refrigerators also.

This guide assembly rail replaces a worn or damaged drawer slide to restore smooth, stable drawer movement and proper alignment. It helps reduce sticking, misalignment, and rattling for a secure fit and quiet operation. What it does:

• Guides and supports the drawer or compartment during open/close cycles
• Restores smooth sliding action and consistent alignment
• Reduces noise caused by worn or bent rails or guides
• Helps prevent drawers from catching or binding

• Disconnect power and empty the drawer before beginning service
• Removal of the drawer and access panel may be required; keep fasteners for reassembly
• Align the rail before tightening fasteners; use basic hand tools

This front plate assembly is the exterior cover that protects and finishes the front of the appliance panel while keeping internal components secure and aligned. It restores the appliance's appearance and helps maintain proper operation. What it does:

• Covers and protects controls, brackets, and internal components located at the front of the appliance
• Replaces cracked, bent, or cosmetically damaged front plate panels
• Helps prevent debris and moisture from reaching internal parts that can cause malfunctions
• Restores a clean, finished look to the appliance front

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle the part carefully to avoid scratching or damaging the finish during installation
• Installation may require removal of adjacent trim or control panel components; keep fasteners organized

A replacement glide rail assembly that supports and guides a refrigerator/freezer drawer for smooth opening and closing. Restores proper drawer tracking and helps prevent sticking or misalignment. What it does:

• Provides the rail and mounting components that the drawer slides on for stable operation
• Restores smooth drawer movement and alignment when original rail is bent or worn
• Helps reduce drawer sticking, scraping, or uneven travel
• Intended for use where the OEM glide/rail assembly is specified

• One glide rail assembly

• Follow the appliance manufacturer's service manual for removal and installation steps
• Disconnect power and empty the drawer before working to prevent injury or damage
• Inspect mounting hardware and drawer slides; replace any damaged fasteners
• Use basic hand tools;

The Drain Tube Assembly is an OEM part for LG refrigerators. This drain tube assembly is responsible for directing condensation and melt water that accumulates in the refrigerator away to the evaporator pan.

Causes can include cracks developing from limescale or mineral accumulation, flexing fatigue from repeatedly catching drips, or damage from improper cleaning methods.

Symptoms of a bad drain tube assembly include:

• Puddles or leaks developing underneath the refrigerator
• Poor air flow from vents and higher temperatures
• Ice or moisture buildup in refrigerator walls and seals
• Water stains or corrosion appearing inside the unit

This OEM LG part is also compatible with some Kenmore models.

This fan grille assembly directs airflow and protects the appliance fan while maintaining proper ventilation for cooling performance. It replaces a damaged or cracked grille to help reduce restricted airflow and rattling noises. What it does:

• Guides and channels air from the fan to improve circulation within the appliance
• Helps protect the fan blades from debris and accidental contact
• Reduces vibration-related noise caused by a broken or loose grille
• Restores a finished appearance to the fan area and helps maintain proper airflow paths

• One fan grille assembly as shown

• Disconnect power to the appliance before beginning any service
• Secure with clips or screws; retain fasteners and note their locations during removal
• Handle the grille gently to avoid cracking plastic tabs; align tabs before snapping into place
• If other components are damaged, inspect surrounding area and replace as needed

A decorative outer trim piece that restores the finished look of the appliance's front/inner cavity. Replaces a cracked, scratched or missing trim to improve appearance and help keep edges protected from spills and wear. What it does:

• Covers and finishes the appliance opening for a clean, factory appearance
• Protects exposed edges from minor chips, scuffs and food buildup
• Helps align/secure adjacent trim and components for a snug fit
• Commonly replaced when the front trim is cracked, warped or cosmetically damaged

• High-level replacement—remove surrounding trim screws or clips before swapping parts
• Use appropriate hand tools and keep small fasteners secure during reassembly
• Disconnect power to the appliance before servicing when working near electrical components

This genuine replacement knob shutter restores the control panel's knob opening and protects internal switches from debris while allowing knobs to engage properly. It helps maintain smooth knob operation and reduces dirt buildup behind the control surface. What it does:

• Covers the knob opening and guides the control knob into place for reliable engagement
• Protects internal switches and electronics from dust, crumbs, and spills
• Helps prevent accidental knob movement when not in use
• Restores proper fit and appearance of the control panel area

• One knob shutter

• Power off and unplug the appliance before beginning any work to avoid electrical shock
• Small fasteners or clips may need to be removed; use appropriate hand tools and keep track of hardware

This door foam assembly replaces the insulation layer inside a refrigerator door to restore thermal sealing and reduce condensation. It helps maintain proper cabinet temperature and supports energy-efficient operation when the original foam is damaged or compressed. What it does:

• Replaces worn or damaged door insulation to improve temperature retention
• Helps reduce door sweating and moisture buildup that can lead to mold or odors
• Supports consistent cooling performance by restoring the door's insulating barrier
• Fits into the inner door cavity and works with existing door panels and liners

• One door foam assembly

• Recommended for repair by someone familiar with appliance disassembly; your model's service manual for exact steps
• Power off and empty the door before starting; remove shelves and hardware as needed to access the foam
• Avoid puncturing or compressing the foam during install; handle gently to preserve insulating properties
• If adhesive or clips are used, ensure proper alignment and secure fastening per OEM guidance

The Main PCB Assembly is an OEM component specifically designed for LG refrigerators. Housed inside the control housing, this circuit board directs all critical refrigerator operations from cooling and icemaking to door alarms. Precise programming maintains consistent temperatures across compartments.  

Causes of a bad main PCB can include physical impact, water damage into circuit paths, or expected component degradation over time. Without proper control, the refrigerator sections cannot regulate temperatures as designed.

Symptoms of a bad main PCB include:

• Inability to adjust temperature settings    
• Erratic cooling or icemaker performance
• Intermittent control functions and error codes
• Improper defrost functions 

This LG OEM replacement ensures reliable operation for years to come. Compatible also with Sears/Kenmore refrigerators, it provides a direct fit and restoration of cooling and temperature functions. 

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This drawer guide is the replacement rail that helps a freezer or refrigerator drawer open and close smoothly, restoring proper alignment and reducing sticking or grinding during use. Designed to match OEM fit and function. What it does:

• Guides the drawer along its track to ensure smooth, even movement
• Keeps the drawer aligned to prevent binding, rubbing, or tipping
• Reduces noise from scraping or catching when opening or closing
• Helps restore proper drawer seating and overall compartment accessibility

• One drawer guide (rail) as shown

• Inspect mating track and adjacent hardware for damage before installing
• Remove power or follow manufacturer safety guidance for accessing interior components
• Install with original fasteners; tighten securely but avoid over-torquing
• If multiple guides are worn or damaged, replace matching guides on the other side for best performance