Lfcs25426/00 Parts

Restore smooth, stable sliding with this rail guide assembly. It supports and aligns the sliding mechanism so your pull-out drawer, bin, or rack opens and closes evenly and seats properly.

• Guides the slide so the drawer/bin/rack moves in and out smoothly
• Helps keep the moving component level and aligned for proper closing
• Replacing a damaged guide can resolve sticking, binding, uneven travel, or scraping/grinding noises
• Can help when the drawer/rack won't extend fully or won't stay closed/seat correctly

• Disconnect power and remove the drawer/bin/rack and its contents for access
• Note orientation and transfer any mounting hardware from the original guide
• Install the new guide in the same position and tighten fasteners securely
• Manually slide to verify smooth travel before reloading

This refrigerator door handle restores a secure, comfortable grip and a clean, factory look. Replace a loose, cracked, or broken handle to improve daily usability and keep the door operating smoothly.

• Provides the handhold to open and close the refrigerator door
• Attaches to the door's factory mounting studs/brackets for a solid feel
• Helps maintain exterior appearance and ergonomics
• Common symptoms: handle feels loose or wobbly, cracks, breaks, or goes missing

• Unplug the refrigerator before servicing
• Protect the door finish with tape or a cloth around mounting points
• Align the handle on existing studs/brackets and tighten fasteners per your model's instructions; do not overtighten
• Confirm the handle is secure and the door closes and seals properly

This handle assembly replaces a damaged or worn freezer door handle to restore secure opening and a finished exterior look. It provides the grip and mounting points needed for normal freezer door operation. What it does:

• Replaces the freezer door handle, restoring a secure, ergonomic grip
• Re-establishes correct mounting and alignment for smooth opening and closing
• Helps prevent further cabinet or door edge wear from a broken handle
• Suitable when the existing handle is cracked, loose, or missing mounting hardware

• One freezer door handle assembly

• Basic tools typically required
• Follow manufacturer instructions and support materials for safe removal/installation
• Disconnect power and empty door storage as needed to avoid damage or injury
• Keep small fasteners and clips organized during replacement to ensure proper reassembly

Refrigerator shelf assembly that replaces a damaged or missing internal shelf, restoring flat, secure storage for food and containers. Helps keep items level and organized inside the fridge. What it does

• Replaces a broken, cracked, or missing refrigerator shelf to restore usable storage space.
• Provides a flat, stable surface for jars, bowls, and containers so items won't tip or slide.
• Prevents food from sagging between compartments and improves organization and accessibility.
• Matches factory-fit shelf mounts and seating points for correct alignment when installed.

• Remove all items from the shelf area before installing; handle glass or trim with care and wear protective gloves if needed.
• Slide or seat the shelf into the factory supports or track until it clicks or sits flat; some models require lifting slightly to engage rear tabs.
• No electrical disconnect is typically required, but follow the refrigerator owner's manual and disconnect power if instructed for your model.
• If the shelf has clips or trim pieces, verify they are properly engaged and undamaged before use.

A PTC thermistor assembly that senses temperature and provides the control board with accurate temperature feedback to help regulate heating and cycling. Replacing a faulty thermistor restores reliable temperature monitoring for safe, consistent operation. What it does:

• Monitors temperature and sends a signal to the appliance control so heating and cycles can be adjusted.
• Helps prevent overheating by enabling proper control of the heating system.
• Common symptoms of a failing thermistor: incorrect or inconsistent temperatures, heating that won't start or won't stop, extended cycle times, or temperature-related error codes.
• Works as the OEM-designated temperature sensing/feedback component for compatible LG units.

• Disconnect power to the appliance before starting any repair.
• Handle the assembly carefully; avoid pulling on wires or connectors—replace in the same orientation.
• May require basic hand tools and access panels.

This Tray Cover Assembly replaces a worn or damaged cover on the appliance tray to help keep contents contained and ensure proper operation of the tray area. It's a direct-fit replacement designed for easy swap-out with the original part. What it does:

• Replaces a cracked, warped, or missing tray cover that can interfere with normal tray use
• Restores a secure, flush cover surface to prevent items from shifting or spilling
• Helps maintain correct alignment and function of the tray where the cover is used
• Reduces the chance of debris getting into the tray cavity and affecting operation

• Refer to OEM instructions for model-specific removal and installation steps
• Disconnect power and, if applicable, water before beginning any repair to avoid shock or unintended operation
• Use basic hand tools; handle plastic parts gently to avoid cracking during installation

This cover assembly protects and secures the control connector area to prevent damage and ensure reliable electrical connections. It restores the original housing around the connector for safe operation and proper fit. What it does

• Covers and protects the appliance's connector area from dirt, moisture, and accidental contact
• Helps keep wiring and plug ends correctly positioned to maintain a stable electrical connection
• Reduces risk of connector damage that can cause intermittent power or control issues
• Appropriate when the original connector housing is cracked, broken, or missing

• One cover assembly for the connector housing

• Designed to snap or screw into place; follow the appliance wiring diagram and connector alignment
• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Inspect surrounding wiring and clips; replace damaged wiring or fasteners as needed

This Hinge Cover Assembly protects and conceals the door hinge area, restoring a clean appearance and preventing dirt or loose clothing from catching in the hinge. Fits where a cosmetic or protective hinge cover is needed. What it does:

• Covers the door hinge to shield moving hardware from debris and reduce pinching hazards
• Restores a finished look to a damaged or missing hinge area
• Helps keep lint, dust and small objects away from the hinge mechanism
• Can reduce noise caused by exposed hinge components when intact

• One Hinge Cover Assembly as shown

• Intended for drop-in replacement; follow your appliance's service manual for disassembly steps
• Disconnect power and water before starting any repair
• Handle plastic parts carefully to avoid cracking; use appropriate fasteners and torque per OEM guidance
• If hinge or mounting hardware is damaged, replace those components before installing the cover

This center hinge assembly supports the middle/center door on compatible refrigerators, restoring proper alignment and smooth opening. Replaces a worn or damaged hinge to help the door close evenly and reduce rubbing or sagging. What it does

• Provides the pivot point that keeps the center door aligned and balanced.
• Allows smooth door movement and helps maintain an even door gap.
• Corrects symptoms like door sagging, uneven gaps, rubbing, or doors that don't close fully.
• Works with factory mounting points for a direct replacement.

• Disconnect power to the appliance and empty or support the door before starting.
• Support the door securely while removing and installing the hinge to prevent injury or damage.
• Use common hand tools and follow the appliance service manual for door removal and reinstallation.
• Check door alignment and gasket seating after installation; adjust hinge position as needed per manufacturer instructions.

This is the main PCB power control board assembly that manages power distribution and electronic control functions for the appliance. Replacing a faulty board restores proper control operation and resolves related electronic faults. What it does

• Routes and regulates power to the appliance's control circuits and major components.
• Interprets user inputs and controls functions such as cycles, timing, and display responses.
• Common symptoms of a failing board: appliance won't power on, display is blank or shows errors, controls are unresponsive, or operation is erratic.
• May cause intermittent operation or failure to start if connectors or board components are damaged.

• Disconnect power to the appliance before removing or installing the board to avoid shock or damage.
• Handle the board by its edges and avoid touching components; use anti-static precautions where possible.
• Note connector locations and orientation before disconnecting; take photos to aid reassembly.

This multi duct directs airflow inside the appliance to maintain proper ventilation and operation. Replacing a damaged duct restores directed air movement and helps prevent exhaust leaks or reduced performance. What it does:

• Routes air between internal components to support heating, cooling, or venting systems
• Prevents exhaust or recirculation air from leaking into the cabinet
• Helps maintain consistent airflow for proper appliance operation
• Can reduce abnormal airflow noise when intact and correctly seated

• Disconnect power (and gas, if applicable) before beginning work
• Handle plastic/metal ducting carefully to avoid cracking or sharp edges
• Verify correct duct orientation and secure all clips or fasteners for an airtight fit