Lfcs276596s Parts

This replacement drip tray catches and channels water beneath the appliance to prevent leaks and pooling. It helps maintain proper drainage and reduces the chance of water damage under your refrigerator or freezer. What it does:

• Collects condensation, defrost water, or minor leaks to keep the cabinet floor dry
• Directs water to the evaporator or drain system so it can safely evaporate
• Helps prevent pooling that can lead to odors or mildew
• Restores a damaged or missing tray to stop water from dripping onto the floor

• For safety, unplug the appliance and shut off water supply (if applicable) before installing
• Slide or snap the tray into the designated location; ensure it seats fully and aligns with the drain path
• Inspect surrounding seals and drain channels for blockages or damage while the tray is accessible

This is a replacement screw used to secure appliance panels, trim, and small components so damaged or missing fasteners don't leave parts loose. It restores proper fit and reduces rattling and movement. What it does:

• Secures panels, trim pieces, or internal components to restore proper fit
• Stops panels from shifting or vibrating during use
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Helps eliminate rattling noises caused by loose fasteners

• One replacement screw as pictured

• Unplug the appliance or shut off power before installing
• Use the correct screwdriver or bit to avoid stripping the head
• Hand-start the screw, then snug—do not overtighten to avoid cracking plastic parts
• If screw threads are damaged, replace with the exact OEM screw to ensure proper fit

This harness assembly is a factory-style wiring harness that routes power and control signals between the dispenser, ice maker and main control—restoring electrical connections for reliable dispenser and ice-maker operation. What it does

• Carries power and signal lines between the refrigerator control board, dispenser and ice maker
• Restores lost or intermittent dispenser power and control communication
• Helps stop intermittent ice-maker cycling or dispenser failures caused by damaged wiring
• Eliminates loose, corroded or broken connector problems on the original harness

• One harness assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle connectors gently and match keyed plugs to their mating sockets
• Inspect connector pins and wiring routing; replace any damaged clips or grommets

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This guide rail is the replacement slide that supports and guides a refrigerator or freezer drawer for smooth opening and closing. It restores proper drawer alignment and prevents sticking or uneven movement. What it does:

• Provides a stable track so the drawer slides in and out smoothly
• Keeps the drawer aligned to prevent binding or drooping
• Reduces noise and friction during operation
• Helps maintain proper drawer sealing by holding position

• One guide rail

• Disconnect power to the appliance before beginning service
• Remove the drawer or shelving as needed to access the rail
• Inspect mating hardware and mounting points; replace damaged clips or screws if present
• Do not force parts; align the rail and slide slowly into position to avoid damage

The Name Plate is an OEM part for LG refrigerators. It is the printed decorative plate used to label the model and serial numbers for individual refrigerator components and the refrigerator itself. This nameplate adheres or attaches to the visible exterior of the appliance for identification purposes. 

Causes of a bad nameplate include damage, aging, or removal of the original nameplate. Over time, nameplates can become faded, stained, cracked, or removable. 

Symptoms of a bad nameplate include:

• Missing or illegible model/serial numbers 
• Inability to accurately identify appliance components
• Substandard aesthetic appearance

This OEM LG replacement nameplate will allow you to correctly label your refrigerator should the original nameplate become damaged or unusable. This LG part is also compatible with Sears/Kenmore.

This compressor set assembly restores the sealed refrigeration system's heart so your refrigerator can cool again. Durable replacement for systems that fail to start, run loudly, or no longer maintain cold temperatures. What it does:

• Compresses refrigerant to circulate cooling through the appliance
• Replaces a failed or seized compressor that prevents cooling
• Addresses symptoms like warm compartments, frequent cycling, or unusual compressor noise
• Works as a complete sealed-system assembly when matched to correct model

• Disconnect power before servicing and follow lockout/tagout procedures
• Use proper torque and mounting to avoid vibration and noise; follow OEM service manual
• Dispose of old compressor and refrigerant per local environmental laws