Lfgh3054uf Parts

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

The Bushing is an OEM part for Frigidaire cooktops. This part serves as an interface between the control knob and the appliance, ensuring smooth operation and protecting both the knob and the control panel from wear and tear. The bushing fits snugly around the valve's stem, reducing friction and providing stability as the knob is turned to adjust the heat settings of the cooktop.

Causes of a bad Bushing can include degradation from frequent use, exposure to high heat, or accidental damage during cleaning or use, which can lead to the bushing becoming loose or worn out.

Symptoms of a malfunctioning Bushing include:

• Loose-feeling knobs that wobble or are difficult to turn
• Excessive wear or visible damage to the knob or panel area
• Difficulty in achieving precise temperature control
• Unusual noise when turning the knobs

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

If your gas range burner won't light, produces weak flames, or has uneven heating, this burner component restores proper cooking performance. Direct fit.

A replacement hex-head screw used to secure appliance regulator brackets and similar small components. Restores proper fastener fit so panels and brackets stay firmly attached. What it does

• Fastens regulator bracket and related sheet-metal components
• Provides a secure threaded connection for components where an 8-18 thread is specified
• Helps eliminate looseness or rattling caused by a missing or damaged screw
• Matches the nickel/chrome finish commonly used on interior mounting locations

• One hex head screw (8-18 x 3/8), nickel finish

• Intended for use where an 8-18 x 3/8 hex screw is specified by the manufacturer
• Tighten to snug; avoid over-torquing which can strip sheet-metal threads
• Turn off power to the appliance before accessing internal components
• If the original screw used a lock washer or threadlocker, replace or reapply as appropriate

This is a black metal side panel that attaches to the left exterior side of the range, providing a finished appearance and structural support. It helps enclose and protect the internal components of the oven cavity. Replace this panel if it is dented, rusted, scratched, or damaged from heat exposure.

Oven won't ignite or heats inconsistently? This gas range ignitor orifice assembly controls gas flow to the burner for reliable ignition and even baking.

This is a black outer glass panel that fits into the oven door assembly. It serves as the exterior-facing layer of the oven door, providing insulation and a finished appearance. Replace this glass if it is cracked, shattered, chipped, or has visible heat damage that compromises the door's seal or safety.

Range drawer glide ensures smooth opening and closing while keeping drawers aligned. Replace when drawers stick, scrape, or misalign. Confirm fit with model.

This ignitor orifice assembly routes gas to the igniter on compatible gas ranges and ovens, enabling reliable burner ignition and consistent flame control. Replacing a worn or damaged assembly restores proper ignition performance. What it does:

• Directs gas flow from the valve to the igniter/burner to allow ignition
• Ensures a focused, steady flame for consistent cooking heat
• Addresses ignition issues like repeated clicking, failed lighting, or weak flame
• Works as a replacement component when the existing orifice is clogged, corroded, or damaged

• Turn off gas supply and disconnect power before servicing.
• Basic hand tools typically required; follow OEM disassembly steps for access.
• After installation, check for gas leaks and proper ignition before normal use.

Oven won't ignite or heat? This ignitor orifice assembly connects the igniter to gas supply for reliable burner lighting. Restores proper ignition.

Positions and separates range components to maintain proper alignment. Replace if cracked, broken, or missing to prevent rubbing and ensure correct spacing.

This is the right-side outer panel for a freestanding range, providing the exterior surface that faces outward when the unit is installed at the end of a counter run. It gives the range a finished appearance and protects internal components. Replace this panel if it is dented, scratched, rusted, or otherwise damaged.