Lfx25971st Parts

This drain tray catches and channels condensed or drained water away from the appliance base to help prevent leaks and water damage. It replaces a cracked or warped tray so drains flow where they should. What it does:

• Collects condensate or defrost water and routes it toward the appliance drain
• Prevents water pooling under the unit that can cause floor or cabinet damage
• Helps reduce odor and mold risk by keeping water from collecting in the cabinet
• Visible signs a tray may need replacement: cracks, warping, or active leaking beneath the appliance

• Disconnect power and water before servicing the appliance
• Remove any panels or shelves to access the tray; handle sharp sheet-metal edges with care
• Ensure the tray seats correctly and that any drain hose or channel is properly connected and unobstructed
• Follow OEM service instructions for reassembly and test for leaks before returning the appliance to normal use

This hinge cover fits over the door hinge to conceal and protect the mechanism. Replacing a cracked or missing cover restores a clean, finished look and helps keep hinge components shielded from dust, snags, and everyday wear.

• Conceals the door hinge for a finished, factory look
• Helps protect hinge hardware from dust and accidental contact
• Reduces snag points around the hinge area
• Typical failure signs: cracked plastic, broken tabs, missing cover, or a cover that won't stay attached

• Disconnect power before servicing; hinge areas can contain wiring
• Open the door and remove any retaining screw(s) or release the cover's tabs
• Lift off the old cover; align and snap or screw the new cover into place
• The door opens and closes freely with the cover installed

This connector cover is the small trim piece that shields and conceals the connection area on your refrigerator. Replacing a cracked or missing cover restores a clean, finished look and helps protect connectors from dust and accidental snags.

• Covers and protects the wiring and/or tubing connector cavity
• Helps keep debris out of the connection area
• Maintains proper routing and prevents snagging of harnesses
• Common signs it's needed: cracked or missing cover, exposed connectors, cover won't stay attached, cosmetic damage

• Disconnect power and turn off the water supply before beginning
• Remove any retaining screw(s) or release tabs to take off the old cover
• Position the new cover, ensuring wires/tubing aren't pinched; secure with original hardware
• Restore power/water and confirm the cover is fully seated

This small retaining clip secures its mating component within the refrigerator assembly, keeping parts properly seated and reducing vibration. Replacing a damaged or missing clip helps restore a snug fit and reliable operation of the attached piece.

• Holds the designated part firmly in place within the assembly
• Maintains proper alignment to prevent movement or rattling
• Helps ensure panels, ducts, or lines stay secured during use
• Symptoms can include loose or sagging parts, vibration noises, or components that won't stay attached

• Disconnect power; if working near the water system, also shut off the water supply
• Note the original orientation and placement before removal
• Fully seat the mating component, then press the new clip into place without forcing
• Check operation before reassembly

A replacement cover frame that restores the finished look and protection around the appliance control area. Replaces a cracked, warped, or scratched trim to keep controls secure and maintain appearance. What it does:

• Covers and protects the control panel edges from bumps, spills, and wear
• Keeps switches and buttons aligned and held in place
• Restores the appliance's finished appearance when the original frame is damaged
• Helps prevent debris from entering the control cavity

• Disconnect power to the appliance before beginning any work
• Remove any outer trim or control panel fasteners to access the existing frame
• Handle the part carefully to avoid scratching the finish during install

This cover cap is a small plastic trim piece that protects exposed fasteners and improves the appliance's appearance. It snaps into place to hide mounting posts and help prevent snags or debris buildup. What it does:

• Covers and protects exposed screws, posts, or fasteners for a finished look
• Prevents lint, dust, and debris from collecting around the mounting point
• Reduces the chance of fabric snags or contact with sharp edges
• Restores worn or missing trim for improved cosmetics

• Disconnect power to the appliance before starting any service that exposes electrical components
• Usually installs by snapping over the post or press-fitting into the trim opening — no special tools required
• If needed, remove adjacent trim pieces to gain access, then reinstall trim in reverse order
• Inspect surrounding mounting hardware for damage and replace if necessary

This rail guide assembly replaces a worn or damaged slide rail to help a refrigerator/freezer drawer or shelf open and close smoothly while keeping items aligned. It restores proper tracking and reduces rubbing and sticking. What it does:

• Guides drawer or shelf movement so it opens and closes on track
• Helps prevent scraping, binding, or uneven movement
• Reduces noise from a misaligned or damaged rail
• Restores proper alignment for smoother operation

• High-level replacement: remove drawer or shelf to access and swap the rail assembly
• Use common hand tools; keep screws and clips organized for reassembly
• Disconnect power only if working near electrical components or lights

This Tray Cover Assembly replaces a worn or broken ice tray cover to protect stored ice and support proper dispenser operation. It restores a secure closure and helps keep ice clean inside the ice bin. What it does:

• Covers the ice tray/bin to keep ice protected from contaminants and odors
• Helps maintain proper dispenser alignment so ice dispenses smoothly
• Replaces cracked, warped, or missing tray covers that allow ice exposure
• Fits into the ice storage area and interfaces with the dispenser mechanism

• One tray cover assembly

• High-level replacement: typically snaps or screws into place — remove power to the appliance before servicing
• Use gloves to protect hands and avoid damaging plastic tabs during removal/installation
• Inspect adjacent components (ice bin, dispenser parts) for wear while replacing

This Vegetable Tray Assembly replaces the fridge crisper tray to restore storage for fruits and vegetables and keep produce organized. Durable replacement tray helps contain spills and provides a stable surface for your produce drawer. What it does:

• Replaces a cracked, broken, or warped crisper tray so the drawer can hold produce securely
• Helps contain leaks and spills to make cleanup easier
• Restores proper support and alignment for the crisper/drawer system
• Useful when the original tray is missing, damaged, or no longer seating correctly

• One vegetable tray assembly

• Slide the old tray out and set the new tray into the same guides; no special tools typically required
• Inspect drawer rails and rollers for damage before installing; replace any broken guides separately
• Handle plastic parts carefully to avoid cracking; wear gloves if needed
• Unplug the appliance or turn off power before performing repairs that require interior access

Replacement guide assembly that secures and aligns internal TV components and cabinet panels to restore proper fit and reduce movement. Use this guide when a panel or internal module sits loose or causes vibration or rattling. What it does:

• Positions and supports internal components and circuit boards to maintain correct alignment
• Secures cabinet panels and trim to prevent gaps and movement
• Reduces vibration and rattling caused by loose internal parts
• Helps maintain proper routing for internal cables and connectors

• Disconnect power and remove the TV from its stand or wall before starting repair
• Use proper tools and keep screws/fasteners organized; handle panels and the display with care
• Follow the OEM service manual for disassembly/reassembly steps and torque specs

This is a replacement mounting screw used to secure appliance panels, trim or components. It restores proper attachment to reduce vibration and rattling and helps keep removable parts firmly in place during operation. What it does:

• Fastens panels, brackets or trim pieces to the appliance frame
• Restores secure fit when original screw is missing, loose, or stripped
• Reduces rattling and vibration caused by loose hardware
• Helps maintain proper alignment of removable covers and control panels

• Disconnect power and water before starting any repair
• Verify size and thread match the original screw before installation
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten — overtightening can strip threads or crack plastic parts
• Keep small parts away from children and pets