Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice freezing in holder or chute not opening fully? This ice dispenser door seals the chute to prevent frost buildup and air leaks. Easy DIY repair.
I replaced the flapper. It was a very easy repair. I removed the unit from the freezer door and unscrewed the old flapper and replaced it with the new one. Very easy fix. Read more
Front plate assembly provides finished trim and mounting surface for your refrigerator. Replace when original panel is cracked, warped, or damaged.
Purchased a replacement piece and working with a few screws, changed it out. Soooo much easier than getting a repairperson! Only complaint is that the part did not come with replacement instructions, that said, once I looked at everything, it was pretty obvious what needed to be done. Read more
Creates an airtight seal to keep cold air in and warm air out. Replace if torn, worn, or causing poor sealing. Confirm fit with your model number.
This was super easy! I ordered the replacement seals from AppliancePartsPros, they also had a video showing how to do it. Once I received the set I simply removed the old ones by pulling them away from the door. I took the new ones and pressed them into place. The only tool needed, was a screwdriver to remove the door divider from the left door. Note- the seal for the left door is different from the right door so you will want to be sure to compare the new seals to the old seals before... Read more
The Fan Assembly is an OEM part for LG refrigerators. It is responsible for circulating air within the refrigerator and freezer compartments, ensuring consistent cooling and optimal temperature distribution. The fan assembly helps maintain the freshness of your food by evenly distributing cold air.
Common causes of a bad fan assembly include electrical issues, worn-out bearings, or obstructions that prevent the fan from spinning properly.
Symptoms of a bad fan assembly include:
This OEM LG part is also compatible with Sears/Kenmore models.
Removed 2 screws from mullion strip heater and slid it up off the tabs at top and bottom. Unhooked the plug and removed it. Verified proper mullion heater and then plugged wiring connection back together, positioned slide clips back in line and slid mullion down onto the clips. Tucked the wiring back into opening positioned cover back in place and reiinstalled the 2 screws. It took about 10 minutes for the entire job. the 2nd problem was a noisy evaporator motor and is a more intense repair... Read more
Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.
Refrigerator not cooling evenly or freezer too warm? A failed DC motor stops air circulation. This motor ensures proper airflow for consistent temps.
Watch youtube video to see how to replace fan motor. Ordered part from AppliancePartsPros.com and replaced it. Perfect match! Read more
Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.
Supports and guides sliding refrigerator drawers or shelves for smooth rolling. Replace if worn, cracked, or causing wobbling, sticking, or noise.
Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.
This is the button or lever assembly mounted on the front panel of the refrigerator dispenser. It activates the water or ice dispenser when pressed. Replace this assembly if the dispenser button is cracked, sticking, unresponsive, or if the dispenser no longer activates when the lever is pushed.
Replaced it. Ordered the dispenser cover because the repair guy said they usually break the plastic tabs removing the cover. I didn't and reused the old one. Just need to be careful removing the old one. Cover just pries off. Simple to replace. Read more
Ice dispenser door won't close or stays open causing frost buildup? This small torsion spring restores tension to snap the chute door closed properly.
Replace your cracked, scratched, or discolored refrigerator door handle. Installs on fresh food or freezer doors for a secure grip and updated look.
Replaced the handle with the new part ordered Read more
The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.
Symptoms that you might need to adjust the door hinges and potentially need this wrench include:
This spanner wrench is also compatible with some Sears/Kenmore refrigerators.
This wrench is perfect for getting into a tight space. Read more
Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.
Went to AppliancePartsPros.com. Located the 2 missing pieces, got them in less than 4 days, dropped them in place. Read more
Replace your cracked, broken, or missing refrigerator door basket. Restores secure storage for bottles, jars, and condiments on the inner door.
After dealing with two cracked door bins forever, I finally decided to hunt down replacements. My refrigerator is a Kenmore, so I started looking at Sears. I struggled with their website a bit and then felt their prices were high so looked on AppliancePartsPros. I thought I'd identified the correct bins, but decided to try the chat feature to confirm. I got a very quick reply and they handled my order from there. The bins came in just a couple of days and they were 30% cheaper than buying... Read more
Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.
Replacing the door hinge and stopper assembly was very easy, once I figured out you had to disconnect the water supply on the back of the fridge before removing the door. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.