Lfx31925sb Parts

This pipe holder is a small plastic clip that secures tubing and small pipes inside the appliance, helping keep lines organized and preventing rubbing or disconnection. It restores proper routing and reduces vibration-related noises. What it does:

• Holds and secures water, drain, or refrigerant tubing to prevent sagging and chafing
• Keeps lines routed away from moving parts to reduce wear and noise
• Helps maintain proper tube alignment to avoid strain on fittings
• Commonly replaced when the original clip is cracked, broken, or missing

• Disconnect power and water before working on the appliance
• Inspect surrounding tubing and fittings for damage when replacing the clip
• Typically installs as a push-fit or snap-on clip; use gentle pressure and avoid forcing
• Replace broken or brittle clips to prevent tubing damage or leaks

This damper assembly controls airflow between compartments to help maintain consistent refrigerator temperatures and restore proper air distribution. It replaces a damaged or stuck damper that interferes with cooling balance. What it does:

• Regulates fresh food/freezer airflow by opening and closing the inlet
• Helps correct uneven temperatures or reduced cooling caused by a stuck or broken damper
• Stops unwanted drafts when the damper is closed
• Operates with the fridge's control system to respond to temperature changes

• Disconnect power to the appliance before starting any repair
• Access typically requires removing interior panels or shelving to reach the damper housing
• Handle plastic parts and wiring gently; avoid forcing connectors

This LED light cover protects and diffuses the appliance's interior LED, restoring even lighting and a finished appearance. It is a direct-fit replacement designed to match the original factory lens. What it does:

• Protects the LED assembly from debris and impacts
• Diffuses and softens LED output for even interior illumination
• Restores a cracked, yellowed, or missing lens that affects light distribution
• Helps prevent direct contact with the LED board

• One LED light cover

• Disconnect power or unplug the appliance before starting
• Handle the lens carefully to avoid scratches; it typically snaps into place or is retained by a few clips
• Use a small screwdriver only if necessary to release retaining clips; avoid forcing parts

The Gasket Assembly Door is an OEM part for LG refrigerators. This gasket forms a seal around the refrigerator door, preventing warm air from entering and cool air from escaping, thus maintaining optimal temperature inside the refrigerator.

Causes of a bad gasket assembly can include wear and tear over time, damage from frequent opening and closing of the door, or degradation from exposure to various elements. A compromised gasket can lead to inefficiency in the refrigerator's cooling performance.

Symptoms of a bad gasket assembly include:

• Warm air entering the refrigerator
• Increased energy consumption
• Frost buildup inside the refrigerator
• The door not sealing properly or being difficult to close

This OEM LG part is also compatible with Sears/Kenmore models.

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The Water Valve Assembly is an OEM part for LG refrigerators. It controls the flow of water into the refrigerator's ice maker and water dispenser, ensuring a steady and controlled supply. This valve opens and closes in response to electrical signals from the refrigerator, allowing water to enter the appropriate compartments for ice making and dispensing.

Over time, the water valve can wear out or become damaged due to mineral deposits, wear and tear, or electrical issues. A malfunctioning water valve can lead to problems such as water not dispensing correctly or the ice maker not producing ice.

Symptoms of a bad water valve assembly include:

• No water dispensing from the refrigerator
• Ice maker not producing ice
• Leaking water from the valve area
• Unusual noises coming from the valve

This OEM LG part is also compatible with Sears/Kenmore.

The Refrigerator Dispenser Lever is an OEM part for LG refrigerators. It is responsible for controlling and dispensing water from the door-mounted dispenser.

Symptoms of a bad dispenser lever include:

• Difficulty activating or inconsistent water flow when pressed
• Water dispensing without pushing the lever 
• Loose fit or wobbly feel
• Missing or broken lever pieces 

Causes of a bad dispenser lever can be wear and tear over time from frequent use. Exposure to impacts or damage during cleaning can also affect proper function.

This part is also compatible with select Sears/Kenmore models.

This rail guide assembly supports and guides a sliding refrigerator drawer so it opens and closes smoothly. Replacing a worn guide can restore proper glide, alignment, and sealing for reliable everyday use.

• Mounts to the slide track to guide the pull-out drawer
• Keeps the drawer level and aligned during opening and closing
• Helps ensure the drawer closes fully for proper sealing
• Common symptoms: drawer binds or rubs, feels rough, won't close flush, or shows cracks/wear on the guide

• Disconnect power and remove the affected drawer/basket before starting
• Remove screws or release tabs to detach the old guide; note orientation
• Install the new guide and secure with existing hardware; ensure slides move freely
• Reinstall the drawer and verify smooth travel and full closure before restoring power

This rail guide assembly supports and guides a sliding refrigerator drawer, helping it open and close smoothly. Replace a cracked or worn guide to restore proper alignment and prevent binding or the drawer jumping off its track.

• Provides the track and support for pantry/crisper/freezer drawer movement
• Keeps the drawer aligned to reduce wobble and uneven travel
• Restores smooth open/close when the guide is cracked or worn
• Helps the drawer seat fully for a proper fit

• Unplug the refrigerator before servicing
• Remove the bin/drawer from the compartment to access the guide
• Save and reuse existing mounting hardware and spacers
• Install the new guide, align the drawer, and verify smooth travel

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

This is a refrigerator drawer guide assembly that supports and guides a crisper/vegetable bin so it slides smoothly in and out. Replacing a worn guide restores proper drawer alignment and easy operation.

• Provides the track surface for the vegetable/crisper drawer
• Helps correct sticking, binding, or a sagging/misaligned drawer
• Can reduce scraping noises and uneven drawer movement
• Restores smooth sliding action after wear or damage

• Unplug the refrigerator before service
• Remove the affected drawer and any shelf above it for access
• Retain and transfer any screws or clips from the original guide
• Test drawer movement and alignment before closing up

This vegetable crisper drawer replaces a cracked or missing bin in your refrigerator. It restores smooth sliding access and organized produce storage, keeping items contained and easy to reach.

• Provides dedicated storage space for fruits and vegetables in the fresh food section
• Slides on the drawer rails for easy access to contents
• Helps contain spills and prevent items from falling into the compartment
• Typical symptoms include cracks, broken tabs, difficulty sliding, or the drawer falling off the rails

• Remove items and pull the old drawer straight out to release it from the rails
• Inspect and clean the shelf tracks/rails before installing the new drawer
• Align the drawer with the rails and push in gently until fully seated
• Handle carefully; avoid forcing or overloading to prevent damage

Restore a sturdy, easy-sliding produce bin with this replacement vegetable crisper drawer. It keeps fruits and vegetables organized and, when used with the matching cover, helps support proper humidity conditions in the refrigerator. What it does:

• Provides a dedicated bin for storing fresh produce under the crisper shelf
• Slides on the factory rails for smooth opening and closing
• Works with the crisper cover/humidity control to help manage moisture
• Common failure symptoms: cracked or broken bin, damaged corners/tabs, drawer sticks, falls off track, or won't stay seated

• 1 vegetable crisper drawer (tray assembly)

• Unplug the refrigerator before servicing
• Remove contents, then slide the old drawer straight out; remove the shelf above if needed
• Transfer any reusable inserts from the old bin if applicable
• Align the new drawer on the rails and slide it in fully; verify smooth operation

This Vegetable Tray Assembly is the refrigerator's crisper drawer for the fresh food section. Replace a cracked or missing bin so produce stores neatly and the drawer slides properly in its tracks.

• Provides a dedicated bin for fruits and vegetables in the fresh food compartment
• Slides on the crisper tracks beneath the shelf/cover for easy access
• Restores proper fit and smooth operation of the drawer
• Common reasons to replace: cracked or broken bin, broken tabs/lip, drawer won't slide correctly, or a missing drawer

• Remove contents, pull the old drawer out to the stop, then lift the front and pull free from the rails
• Align the new drawer with the tracks and slide it fully into place
• No tools typically required; handle plastic carefully and do not force parts