Lfxc 24726S/02 Parts

This drain tube assembly channels defrost water from the evaporator to the drain pan, preventing leaks and water buildup. Replace a cracked or clogged tube to restore proper drainage and reduce puddles or ice inside your refrigerator.

• Directs defrost water from the drain outlet to the drain pan
• Helps prevent water leaks inside the fresh food or freezer compartment
• Addresses issues from a tube that is cracked, kinked, or obstructed by debris/ice
• Common symptoms: water under crisper drawers, puddles beneath the unit, or ice forming at the freezer bottom

• Unplug the refrigerator before servicing
• Access the drain outlet and remove any ice or debris from the drain path
• Fully seat the tube at both ends to ensure a secure, leak-free fit
• Test by pouring a small amount of warm water into the drain to confirm proper flow to the pan

Restore proper airflow with this replacement fan assembly. It circulates air across the coils and through the cabinet so your refrigerator can move heat effectively and maintain consistent temperatures throughout. What it does:

• Drives airflow to support heat exchange at the coils
• Helps maintain stable, even temperatures inside the compartments
• Supports proper cooling performance and system reliability
• Common symptoms: fan not running or intermittent, unusual rattling/scraping noise, reduced airflow, warmer-than-normal temps or extended run times

• 1 fan assembly

• Disconnect power before servicing; wear cut-resistant gloves
• Access the fan compartment; remove covers/panels as designed
• Note wire orientation and transfer any reusable hardware from the old unit
• Secure the assembly; ensure the blade spins freely before restoring power and testing

Rail Guide Assembly keeps a dishwasher or appliance drawer/rack aligned and sliding smoothly, restoring proper movement and preventing jams or sagging when the original guide is worn or broken. What it does:

• Guides and supports the drawer or rack along its track for smooth, even travel.
• Replaces cracked, worn, or bent guides that cause sticking, rough movement, or drooping.
• Helps restore proper alignment so the drawer/rack opens and closes without binding.
• Prevents further wear to adjacent rollers or tracks by restoring correct motion.

• Disconnect power (and water if applicable) before starting any repair.
• Remove the drawer/rack and any obstructing parts to access the guide; keep fasteners organized.
• Basic hand tools (screwdriver, nut driver) are typically required; align tabs/slots before securing.

This ice dispenser assembly replaces the dispenser mechanism in compatible LG refrigerator doors, restoring smooth ice delivery and helping stop jams or broken chutes so your dispenser works reliably again. What it does:

• Channels ice from the freezer bin through the door to the dispenser chute.
• Activates the dispenser mechanism to release ice when the paddle/lever is pressed.
• Common symptom fixes: ice not dispensing, ice jams, cracked or damaged chute, or loose/disconnected dispenser components.
• Helps restore normal dispenser operation without replacing the entire door assembly.

• Disconnect power to the refrigerator before beginning any repair.
• Access typically requires removing the refrigerator door panel/liner and disconnecting the dispenser harness; follow the OEM service manual for procedure.
• Handle plastic chute components carefully to avoid cracking; check connector seating and alignment during reassembly.
• Test dispenser function after reinstalling the panel.

This rail guide assembly supports and guides a refrigerator drawer along its slide track. Replacing a worn rail restores smooth, even movement and helps the drawer close properly without binding or coming off track.

• Guides the drawer along the slide path for smooth opening and closing
• Maintains alignment to keep the drawer level and stable
• Common symptoms of failure: sticking, rough or noisy travel, tilting, coming off track, or not closing fully
• Damage or wear to the rail can prevent proper drawer operation

• Disconnect power and remove drawer contents before servicing
• Pull out and remove the drawer/basket to access the rail
• Unfasten and remove the old rail; retain and transfer any mounting hardware or clips if needed
• Secure the new rail and test drawer travel for smooth, even operation

Restore the interior of your refrigerator with this T/V cover assembly. It covers the temperature-variable (T/V) section and helps direct airflow in the fresh food compartment, protecting components and maintaining a clean, finished appearance for consistent performance.

• Covers and protects the T/V section/duct inside the fresh food compartment
• Helps guide airflow to the T/V area as designed by the manufacturer
• Replaces cracked, warped, or missing panels to restore proper fit and function
• Common signs to replace: broken tabs, loose or rattling panel, uneven cooling around the T/V area

• Disconnect power before servicing
• Clear the shelf area and remove adjacent drawers or trim as needed
• Release retaining screws or clips and lift out the old cover carefully
• Seat the new cover evenly on its supports; ensure vents/slots align and the panel locks into place before restoring power

This refrigerator door handle restores a secure, comfortable grip and a clean, factory look. Replace a loose, cracked, or broken handle to improve daily usability and keep the door operating smoothly.

• Provides the handhold to open and close the refrigerator door
• Attaches to the door's factory mounting studs/brackets for a solid feel
• Helps maintain exterior appearance and ergonomics
• Common symptoms: handle feels loose or wobbly, cracks, breaks, or goes missing

• Unplug the refrigerator before servicing
• Protect the door finish with tape or a cloth around mounting points
• Align the handle on existing studs/brackets and tighten fasteners per your model's instructions; do not overtighten
• Confirm the handle is secure and the door closes and seals properly

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

This tray assembly fits the refrigerator fresh room to support the crisper/drawer area and help contain spills. Replacing a cracked or warped tray restores smooth drawer movement and helps keep produce organized. What it does:

• Provides a stable support surface for the fresh room/crisper drawer.
• Helps contain drips and small spills to prevent messes in lower compartments.
• Restores even drawer sliding and reduces binding, rattling, or misalignment caused by a damaged tray.
• Fits specific fresh room assemblies.

• Unplug the refrigerator or switch off power before servicing to avoid electrical hazard.
• Remove the fresh room/crisper drawer to access the tray; the tray typically lifts or slides out.
• Retain any clips or fasteners and reinstall them with the new tray as needed.

Replacement refrigerator door basket that restores usable storage on the door and keeps bottles, jars and condiments secure. Molded plastic design replaces a cracked or broken bin so items stay organized and won't fall when the door opens. What it does

• Provides a shelf on the refrigerator door to hold bottles, jars and small containers
• Replaces cracked, chipped or warped door bins that no longer secure items
• Helps prevent spills and shifting items when opening or closing the door
• Use only on compatible models; fit with your model number before ordering

• Remove all items from the door and lift or slide out the old basket
• Install the new basket by aligning tabs/runners and snapping it into place; do not force
• Inspect mounting tabs—if damaged, replacement may require additional clips
• Dispose of broken plastic pieces carefully and keep children away during replacement

The Water Valve is an OEM component specifically designed for LG refrigerators equipped with internal dispensers. Located inside the refrigerator wall, this valve regulates water flow to the dispenser spigot on demand. Through precise operation, it provides consistently refreshed chilled water.  

Causes of a bad water valve can include mineral buildup restricting flow passages over time, or physical damage disrupting seals.

Symptoms of a bad water valve include:

• No water was dispensed from the spout
• Leaks in the refrigerator compartment 
• Foreign odors emitted around the valve area

This authentic LG valve restores the dispenser function, delivering clean water efficiently. Its self-closing design helps prevent leaks when not in use. Replace to satisfy LG quality and support luxury features like internal filtration performing dependably for years.

This OEM LG part also fits select Kenmore refrigerator models using LG-developed components and controls for a premium user experience.
 

This service power control board restores service-mode power and control functions on compatible LG appliances, letting technicians run diagnostics and onboarding procedures without intermittent power or communication issues. What it does:

• Provides power and control to service/onboarding circuits and diagnostic interfaces.
• Manages communication between service ports and the appliance control system during operations.
• Helps resolve symptoms like service-mode failures, unresponsive diagnostic interfaces, or intermittent control power during servicing.
• Supports proper execution of OEM onboarding and diagnostic procedures when the original SVC PCB is faulty.

• Always unplug the appliance (and turn off water supply if applicable) before starting service.
• Observe ESD precautions; handle the PCB by its edges and avoid touching circuitry.
• Carefully disconnect and reconnect mating wire harnesses; confirm connectors are fully seated.
• Follow the OEM service manual for onboarding/diagnostic procedures.

This door basket is the refrigerator door bin that mounts on the inner door panel. Replacing a cracked, loose, or missing bin restores safe, organized storage for bottles, condiments, and other small items on your refrigerator door.

• Provides stable door storage for condiments, beverages, and small items
• Attaches to molded tabs/rails on the door liner
• Restores capacity and organization when the original bin is damaged or missing
• Common symptoms: bin falls off, won't stay seated, wobbles, or is cracked

• Remove contents, then lift the old bin straight up to release from the door tabs
• Align the new bin with the door rails/tabs and press down until fully seated
• Handle plastic at room temperature and avoid forcing to prevent cracking
• Confirm secure engagement before reloading items

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

The Compressor is an OEM component specifically designed for LG refrigerators. Located inside the refrigerator compartment, the compressor pressurizes and circulates refrigerant through the cooling system. Through precisely timed operation, the compressor maintains optimal freshness.

Symptoms of a bad compressor include:  

• Elevated interior temperatures failing to efficiently chill
• Loud buzzing or vibrating noises coming from inside the walls  
• Frost buildup indicating ineffective cooling cycles
• Complete cooling system failure leaving foods unpreserved

Causes involve refrigerant leaks, blocked airflow to the compressor, or simply wear over tens of thousands of hours of use breaking down moving components.

This OEM LG part is also compatible with some refrigerator models from Kenmore and Sears. Replace to restore reliable, long-term temperature control keeping contents at peak freshness.

The motor bracket assembly secures the motor inside your appliance, keeping it aligned and stable. Replacing a damaged bracket helps reduce vibration-related noise and prevents the motor from shifting or rubbing during operation.

• Securely supports and positions the motor within its housing
• Maintains proper alignment and clearance to prevent rubbing or scraping
• Helps reduce vibration and rattling noises from a loose or broken mount
• Replaces cracked, warped, or broken brackets that allow the motor to move

• Disconnect power to the appliance before servicing; wear cut-resistant gloves.
• Remove the necessary cover/panel to access the motor area.
• Transfer the motor and any cushions/grommets and screws from the old bracket to the new one.
• Ensure moving parts rotate freely and wiring is secured before reassembly.