Lfxc 24726S/02 Parts

The Handle Assembly is an OEM part for LG refrigerator freezer compartments. It includes the handle and mechanical components that operate the freezer drawer.

Causes of a bad handle assembly can include fatigue from repeated opening and closing motions, damage sustained from heavy loads, or exposure to harsh chemicals over years of use.   

Symptoms of a bad handle assembly include:

• Handles detaching from the drawer front  
• Difficulty smoothly opening and closing the freezer drawer
• Inability to fully open or close the drawer
• Excessive play, wobble, or loose motion in the handle

Replace yours today with this genuine OEM LG assembly to restore effortless operation. This replacement handle is compatible with Frigidaire, Samsung, Whirlpool, and some Kenmore models.

This drawer tray assembly is the platform that supports a refrigerator storage drawer and guides it along the slides. Replacing a cracked or damaged tray restores smooth operation, proper alignment, and dependable support for your food items.

• Supports the drawer bin and its contents inside the compartment
• Interfaces with the slide/rail system for smooth in-and-out travel
• Helps maintain proper alignment so the drawer opens and closes fully
• Common symptoms: cracked or broken tray, broken tabs, wobbling drawer, sticking/binding, or difficulty closing

• Disconnect power and empty the drawer before service
• Remove the drawer per your model's instructions; release tabs or screws securing the tray
• Position the new tray, ensuring tabs/rollers seat correctly; reinstall any fasteners
• Reinstall the drawer and check for smooth travel before reloading

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This TV cover assembly replaces the outer cabinet panel that protects internal electronics and restores the television's appearance and structural support. Use it to repair cracked, broken, loose or missing covers and to reduce rattling or exposed components. What it does:

• Protects internal circuit boards, connectors and speakers from dust and damage
• Replaces cracked or damaged cabinet panels that cause cosmetic issues or expose components
• Stops loose or rattling panels that can create noise during operation
• Restores mounting points and alignment for screws and internal assemblies

• Always unplug the TV and allow time for internal capacitors to discharge before starting work
• Handle the assembly carefully to avoid scratches; use appropriate screwdrivers for mounting hardware
• Keep track of screws and small parts during removal; replace any damaged fasteners

This handle assembly replaces a damaged or worn freezer door handle to restore secure opening and a finished exterior look. It provides the grip and mounting points needed for normal freezer door operation. What it does:

• Replaces the freezer door handle, restoring a secure, ergonomic grip
• Re-establishes correct mounting and alignment for smooth opening and closing
• Helps prevent further cabinet or door edge wear from a broken handle
• Suitable when the existing handle is cracked, loose, or missing mounting hardware

• One freezer door handle assembly

• Basic tools typically required
• Follow manufacturer instructions and support materials for safe removal/installation
• Disconnect power and empty door storage as needed to avoid damage or injury
• Keep small fasteners and clips organized during replacement to ensure proper reassembly

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

Handle assembly for refrigerator doors that restores a secure grip and smooth opening. Direct-fit replacement designed to match the factory handle for proper operation and appearance. What it does:

• Replaces damaged, cracked or loose refrigerator door handles
• Restores a secure grip for easier opening and closing
• Matches factory mounting points for a correct fit
• Reduces handle wobble and prevents snagging during use

• Basic hand tools are typically required; retain original screws and brackets unless replacement hardware was purchased
• Wear gloves and eye protection to avoid sharp edges during installation

This water tube routes drinking water from the refrigerator's supply to the dispenser/ice system, restoring proper water flow for dispensing and ice-making. Use when water flow is reduced, leaking, or the tube is cracked or clogged. What it does:

• Carries potable water between the internal components (valve, dispenser, ice maker) for dispensing and ice production
• Replaces cracked, split, or clogged tubing that causes leaks or poor water flow
• Helps stop visible leaks and restores consistent dispenser flow when tubing is the fault
• Compatible with systems that use a molded plastic water line rather than braided or metal tubing

• Turn off water supply and unplug the appliance before beginning work
• Drain residual water from the line and catch any spillage with a towel or small container
• Inspect fittings and seals; replace O-rings or clamps if damaged

This lever button is the push-style control used to activate a specific function on the appliance's control panel. It restores tactile control and makes it easy to trigger the associated feature without replacing the whole panel. What it does:

• Acts as the user-facing push lever that completes the button action on the control assembly
• Replaces a cracked, worn or unresponsive lever that won't depress or return properly
• Helps resolve intermittent or failed button activation when the switch and contacts are otherwise good
• Matches the OEM shape so the button aligns and engages cleanly with the underlying switch

• High-level swap: remove the front/control bezel to access and replace the lever; keep screws and clips organized
• Power safety: disconnect power (unplug or shut off breaker) before servicing control area
• Inspect underlying switch and mounting clips during replacement; do not force parts into place

This freezer door foam assembly restores the insulated core inside a freezer door to help the door maintain proper cold retention and reduce frost. It replaces damaged or compressed foam that can compromise the door's thermal barrier. What it does:

• Replaces the insulated foam core inside the freezer door to improve thermal performance
• Helps reduce frost buildup and uneven temperatures caused by degraded door insulation
• Supports a tighter door fit by restoring original door thickness and shape
• Works with the existing door liner and outer panel to re-establish proper sealing

• Disconnect power to the appliance before starting any repairs.
• Removal of the inner door liner or outer panel is commonly required; handle panels and clips carefully to avoid damage.
• Use proper tools and keep small fasteners organized; inspect door gasket and hardware while the door is open.

This guide assembly replaces the internal guide that helps align and support the TV panel and internal components, restoring proper fit and reducing rattles or misalignment. It's a straight swap for damaged or worn guides. What it does:

• Holds and aligns the display panel and internal modules to maintain correct spacing and fit
• Prevents panel movement that can cause rubbing, rattling, or uneven gaps
• Restores secure mounting after impact or wear that bent or broke the original guide
• Helps ensure proper chassis alignment for accurate screen placement and service access

• Disconnect power and remove the TV from its stand or wall before servicing
• Handle the display panel and internal cables carefully to avoid damage
• Use appropriate screwdrivers and keep fasteners organized for reassembly

This DC motor powers the washer's drum rotation, restoring normal spin and agitation so loads wash and rinse effectively. Designed to replace a worn or failed drive motor for reliable drum movement and consistent cycle performance. What it does:

• Spins the drum and controls agitation for wash and rinse cycles
• Restores normal spinning when the washer won't agitate or spin
• Helps reduce noisy, uneven, or intermittent drum rotation when the motor is the cause
• Works with the washer's electronic controls to regulate motor speed and direction

• One DC drive motor

• Disconnect power before starting and follow the washer manufacturer's service manual
• Basic disassembly of the cabinet and drum support is typically required; keep fasteners organized
• Verify wiring connectors and mounting orientation match the removed motor before final assembly
• Check control board and wiring for faults

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.