Lfxc 24726S/02 Parts

This Air Filter Assembly helps reduce odors and airborne particles inside the appliance for fresher-smelling air and improved interior environment. Designed as a direct-replacement filter assembly matching the OEM design. What it does:

• Captures odors and helps reduce airborne contaminants that cause unpleasant smells
• Restores the appliance's built-in air-cleaning function when the original filter is worn or missing
• Commonly replaced when you notice persistent odors or reduced air freshness inside the appliance
• Works as part of the appliance's ventilation/air circulation system to maintain interior air quality

• One complete air filter assembly (as shown)

• Refer to your appliance manual for the correct access panel and replacement procedure
• Replace with the appliance powered off and follow basic electrical safety if removal requires accessing wiring
• Verify correct orientation and secure mounting so the filter seals properly in the housing
• Dispose of the old filter per local regulations

This door gasket assembly replaces a worn or damaged refrigerator door seal to help restore an airtight seal and maintain proper cooling. A properly seated gasket reduces drafts, moisture intrusion, and energy loss. What it does:

• Seals the refrigerator door to keep cold air in and warm air out.
• Helps prevent frost buildup and moisture accumulation inside the compartment.
• Reduces compressor run time and energy usage caused by a leaking seal.
• Addresses symptoms such as warm spots, visible gaps around the door, or condensation on the door edges.

• Disconnect power to the appliance and remove food from the door area before starting.
• Inspect the door flange for damage and clean the mounting surface to ensure a proper seal.
• Seat the gasket fully into the channel; some models require loosening or removing trim screws to install.
• If the door does not close evenly after installation, check hinge alignment and adjust per the OEM instructions.

This guide assembly is a replacement plastic mounting guide that helps align and secure TV internal components and panels for stable operation and fit. Replacing a damaged guide restores proper panel alignment and reduces rattles. What it does

• Positions and supports TV panels or internal modules to maintain correct alignment
• Keeps components from shifting, which can cause rubbing, noise, or uneven gaps
• Helps ensure consistent fit of the bezel and display assembly after reassembly
• Restores secure mounting where original guide is cracked, broken, or missing

• One guide assembly

• Disconnect power and remove the TV from its stand or wall before starting
• Partial disassembly of bezel or rear cabinet is typically required; keep track of screws and clips
• Handle the panel and internal cables carefully to avoid damage; wear an anti-static wrist strap if available
• Test fit before final reassembly and power-up to proper alignment

This center hinge assembly replaces the factory door pivot and restores proper door alignment and smooth opening. It supports the refrigerator door at the center hinge point to help stop sagging, binding, or uneven gaps. What it does:

• Replaces the center pivot point that supports and guides the door
• Restores correct door alignment and even sealing to help maintain cooling efficiency
• Reduces door sag, sticking, and noise caused by worn hinge parts
• Allows the door to open and close smoothly when operating normally

• Disconnect power to the appliance and remove food from affected door before starting.
• Support or remove the door to avoid injury or damage; the door can be heavy.
• Use appropriate hand tools and follow torque guidelines in the OEM instructions.

This tray assembly is the replacement drawer pan that supports and contains items inside the refrigerator drawer, restoring proper storage and a secure sliding surface for the drawer. It helps keep foods contained and prevents sagging or cracking. What it does

• Replaces a cracked, warped, or missing drawer tray to restore a stable surface for stored items
• Supports the refrigerator drawer so it opens and closes smoothly and stays aligned
• Helps contain spills and prevents food from falling onto lower compartments
• Fits into the existing drawer frame and works with original slides and seals

• Disconnect power to the appliance before starting any repairs
• Remove the drawer and slides per the refrigerator's service instructions before swapping the tray
• Handle plastic components carefully to avoid cracking; use gentle pressure when seating the new tray

This filter cover replaces the damaged or worn cover that holds the air filter in place, helping maintain correct filter position and airflow for proper operation. It's a direct-fit replacement designed for easy swap-out. What it does

• Secures and protects the air filter inside the unit so the filter seals and sits correctly.
• Maintains proper airflow path to help the system run as designed.
• Prevents debris from bypassing the filter and entering internal components.
• Helps reduce rattling or vibration caused by a loose or broken cover.
• Restores the intended fit and finish of the filter compartment.

• One filter cover

• Disconnect power or remove batteries before removing the old cover to avoid fan or electrical hazards.
• Remove the old cover by releasing clips or screws; align replacement and engage clips or reinstall screws securely.
• Do not force the cover—ensure filter is seated correctly before closing to avoid damage.
• Replace hardware with OEM-equivalent parts for proper fit.

This lever return spring restores proper tension to the lever assembly so the control or latch returns smoothly. A direct-fit replacement designed to restore normal lever movement and function. What it does:

• Provides return tension for the lever to ensure reliable latch or control movement
• Helps stop the lever from sticking or remaining engaged after use
• Restores smooth, consistent operation when the original spring is worn or broken
• Commonly replaced when lever movement feels loose or fails to return

• One spring lever

• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Access may require removing panels or the control/door assembly; keep fasteners organized
• Inspect mating lever and pins for wear; replace damaged components to prevent repeat failure

A replacement freezer tray that restores a level, secure surface for frozen foods and helps contain spills in the freezer compartment. Fits where the factory storage pan has cracked, warped, or failed. What it does:

• Provides a flat, durable surface to hold frozen foods and packages
• Contains minor spills to help keep the freezer interior cleaner
• Replaces cracked, warped or broken freezer pans that no longer seat properly
• Helps maintain organized storage and prevents items from shifting

• Disconnect power to the appliance before any service to avoid electrical hazards
• Remove food, shelves, and drawers that block access to the tray area
• Slide or snap the tray into place; do not force—verify it seats securely and level

This is an ice storage bucket that collects and holds cubed ice from the refrigerator ice maker, making it easy to dispense and store ice for daily use. It replaces a cracked, warped, or missing ice bin to restore proper ice handling. What it does:

• Collects and stores ice produced by the ice maker so cubes are ready to dispense
• Guides ice to the dispenser/door chute or manual access area to prevent spills
• Prevents ice jamming caused by broken or deformed bins
• Helps keep ice contained and sanitary inside the freezer compartment

• Disconnect power before servicing the ice maker area to avoid injury
• Remove any remaining ice before removing the old bucket to reduce spills
• Align bucket tabs/guides and slide into place until it seats naturally; do not force
• If ice does not dispense after install, check ice maker alignment and clear ice chute

This customized screw secures internal components and panels in compatible appliances, providing a reliable fastener that restores proper fit and function. Use it when factory screws are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or assemblies to maintain structural alignment and prevent rattles
• Replaces stripped, corroded or missing mounting screws that can cause loose parts or vibration
• Restores secure connections for controls and internal components to help appliances operate quietly
• Works where the OEM called for a non-standard or modified screw shape/length

• Use the correct screwdriver or bit to avoid stripping the head; avoid overtightening
• Turn power off and unplug the appliance before accessing internal components
• Compare replacement to the original screw for length, thread and head type before installation

This drain tray assembly collects and directs moisture and condensate to the drain system, helping prevent leaks and pooling under the appliance. Designed to fit the appliance's drain path and restore proper drainage. What it does:

• Captures condensate and channel water toward the drain to reduce standing moisture.
• Helps prevent water from pooling under components that could cause corrosion or odors.
• Restores proper drain routing after a damaged or cracked tray is removed.
• Works with existing hoses and clips to maintain normal drainage performance.

• Disconnect power and water before beginning repair.
• Remove access panels or components as needed to reach the drain tray; keep fasteners organized.
• Inspect surrounding seals, hoses, and clips and replace any worn parts to ensure a watertight fit.
• Reassemble panels and test the appliance for proper drainage and leaks before returning to service.

This door assembly replaces the outer door for the refrigerator's built-in home bar compartment, restoring a proper seal and appearance so the bar area closes and insulates correctly. Designed to match OEM fit and function. What it does:

• Replaces a damaged, dented, or warped home bar door to restore proper closure
• Helps maintain interior temperature of the bar compartment by ensuring a good seal
• Resolves issues with the door not latching or sitting flush
• Restores original appearance and finish of the bar access area

• One complete home bar door assembly

• Professional or experienced DIY recommended—door assemblies can be heavy and awkward to handle
• Disconnect power to the appliance before starting any repairs
• Keep fasteners and hinge hardware organized; follow OEM alignment for correct sealing

This center hinge assembly replaces the factory center hinge that supports and aligns the refrigerator doors, restoring proper door movement and a tight seal for efficient cooling. It's a direct-fit mechanical hinge used where the upper and lower doors meet. What it does:

• Supports the weight of the upper/lower doors and maintains proper door alignment
• Lets the door pivot smoothly to open and close without binding
• Helps the door seal correctly to prevent warm air leaks and frost buildup
• Stops sagging or uneven door gaps that cause rubbing or poor closure

• One center hinge assembly

• Disconnect power to the appliance before starting work; if the unit has a water line, shut off the water supply as needed
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use basic hand tools; follow the manufacturer service instructions for torque and fastener sequence

This upper hinge assembly secures and guides the appliance door at the top hinge point, restoring proper door alignment and smooth opening. Replaces a worn or damaged upper hinge to reduce door sag, binding, or uneven sealing. What it does:

• Supports the top of the door and provides the pivot point for opening and closing
• Restores correct door alignment to improve gasket sealing and energy efficiency
• Eliminates rubbing, binding, or uneven movement caused by a damaged hinge
• Reduces noise from a loose or worn hinge

• Unplug the appliance and empty or support the door before starting work
• Use proper hand tools and take care not to tighten fasteners excessively
• Keep track of hardware; replace only listed items unless additional parts are required