Lfxc 24726S/02 Parts

This holder assembly bracket secures and aligns a small appliance component so it stays in place during normal use, restoring reliable fit and reducing noise or movement caused by a loose part. What it does

• Provides a stable mounting point for the associated component to prevent shifting or detachment
• Restores correct alignment for doors, panels, or internal modules that rely on the bracket
• Helps stop rattling, vibration noise, or intermittent contact caused by a broken or bent bracket
• Supports safe operation by keeping parts properly positioned within the appliance

• Basic hand tools are usually all that's required; follow the appliance service manual for access steps
• Disconnect power (and water, if applicable) before starting any repairs to avoid shock or injury
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws or damaged clips for a secure fit

This shelf assembly replaces a damaged or worn shelf to restore stable storage and organization inside the refrigerator. It provides a secure, level surface for food containers and helps maintain efficient use of interior space. What it does:

• Replaces a cracked, chipped or missing shelf to prevent spills and support refrigerated items
• Restores proper shelf spacing and weight support for everyday food storage
• Helps eliminate rattling or misalignment caused by a broken shelf assembly

• Remove food and unplug the refrigerator or disconnect power before starting
• Slide out the old shelf, lift to clear support rails, and position the new shelf into the same supports
• Handle carefully if the shelf is glass; use gloves and place on a padded surface during install
• Check support rails for damage or debris before forcing into place

This main PCB power control board assembly manages the appliance's electronic controls and power distribution so the unit responds correctly to user commands. Replacing a faulty board restores control panel operation and key functions. What it does:

• Regulates power and communication between the control panel and internal components
• Handles user input signals and runs control sequences for normal operation
• Can correct symptoms like unresponsive controls, failure to start, or intermittent operation when the board is faulty
• Works as the central control module for timed cycles and safety interlocks

• One main PCB power control board assembly

• Disconnect power at the breaker or unplug the appliance before starting any repair
• Handle the PCB by its edges and avoid touching components to prevent ESD damage
• Verify connector orientation and seating; ensure all ribbon cables and harnesses are fully engaged

This replacement door basket holds bottles, condiments and other items securely on the appliance door, restoring usable storage and preventing items from shifting or falling. Durable molded plastic matches OEM fit and function. What it does:

• Provides dedicated storage on the door for bottles, jars and small containers
• Replaces cracked, warped or broken door storage that lets items fall or snag
• Restores proper spacing and retention so door items stay organized during use
• Matches original mounting points for a secure snap-in fit

• One door basket

• Remove food and empty other door bins before installing to avoid spills
• Most installations are snap-in; align mounting tabs and press until it clicks
• No special tools typically required; use a soft cloth to protect finishes
• If brittle or damaged plastic is difficult to remove, wear gloves and pry gently

This lever-style button is the user-facing push control that engages a mechanism when pressed, restoring proper control input and tactile feedback. It's a direct-replacement component used where a worn or broken button prevents normal operation. What it does:

• Provides a firm, responsive surface for pressing controls or releasing a latch
• Restores proper mechanical engagement when original button is cracked, loose, or missing
• Helps eliminate intermittent or non-responsive button presses caused by damaged button parts
• Matches OEM fit and function to maintain original user interface feel

• One lever-style push button

• High-level replacement; most installations require removing the control panel or trim to access the button
• Power off and unplug the appliance before beginning work to avoid shock or injury
• Handle small plastic parts carefully to avoid damage; test button function before reassembling all panels

This decor cap is a small exterior trim piece that restores the finished look of the refrigerator door and covers fasteners or exposed edges. It helps maintain the appliance's appearance and protects underlying hardware from dust. What it does:

• Covers and protects exposed screws or trim edges on the refrigerator door
• Restores a clean, finished appearance to damaged or missing trim areas
• Helps prevent dirt and moisture from contacting underlying hardware
• Commonly used when replacing door trim or after hinge/fastener service

• One decor cap

• High-level replacement only; typically snaps or slides into place over the trim area
• Power off and empty nearby shelves if removing heavy items to access the cap safely
• Use non-marring tools to pry gently if needed to avoid scratching surrounding surfaces
• Keep hardware organized and hand-tighten to avoid overtightening

This replacement home bar case is the inner door shelf that holds bottles and small items in the refrigerator door, restoring storage function and a finished interior look. It fits the refrigerator's dedicated home/bar compartment. What it does:

• Provides a secure shelf for bottles, cans, and small containers in the door's home/bar area
• Restores proper spacing and support so items sit level and stay in place
• Replaces cracked, broken, or missing door-shelf housings that cause items to fall or rattle
• Helps maintain the refrigerator's intended interior organization and appearance

• One home bar case (single inner door shelf housing)

• Remove food and items from the door before replacing; handle glass or plastic shelves carefully
• Usually installs with snap-in tabs or a small number of screws—do not force parts; align tabs before pressing
• If your door has wiring or lighting nearby, disconnect power to the refrigerator before working on the door

This cover tray is the molded plastic top/cover that protects and contains the unit's internal tray area, helping keep components clean and guiding condensate or collected material into the tray. Replaces cracked, warped or missing tray covers to restore proper containment and appearance. What it does

• Covers and protects the appliance's internal tray area to prevent debris from entering internal components.
• Guides liquid or collected material into the tray for proper containment.
• Helps maintain correct fit and alignment of adjacent panels and parts.
• Common symptom: visible cracks, warping, loose fit or missing cover causing spills or debris entry.

• Disconnect power and remove any water or debris from the tray area before replacing the cover.
• Inspect surrounding tabs and mounting points for damage; replace any broken fasteners for a secure fit.
• Handle the plastic cover carefully to avoid cracking; hand-tighten any screws to avoid stripping.

This rail holder is a small mounting bracket that secures a sliding rail or shelf rail inside the appliance, restoring stable support and proper alignment for the rail assembly. It's a direct-replacement style part used where a broken or worn bracket allows the rail to sag or detach. What it does:

• Secures the end of a sliding shelf or drawer rail to the appliance frame for stable movement
• Restores proper alignment when a rail droops, binds, or pulls away from its mounting point
• Prevents the rail from disengaging or falling during use
• Works with the original rail assembly to maintain smooth in-and-out travel

• One rail holder / rail mounting bracket (quantity: 1)

• Disconnect power (or unplug appliance) before starting work and allow any hot surfaces to cool
• Basic hand tools (screwdriver or nut driver) may be required; keep fasteners for reuse unless new ones are provided
• Handle edges carefully; support the rail/shelf while removing or installing the holder to avoid drops or damage

This replacement drip tray catches and channels water beneath the appliance to prevent leaks and pooling. It helps maintain proper drainage and reduces the chance of water damage under your refrigerator or freezer. What it does:

• Collects condensation, defrost water, or minor leaks to keep the cabinet floor dry
• Directs water to the evaporator or drain system so it can safely evaporate
• Helps prevent pooling that can lead to odors or mildew
• Restores a damaged or missing tray to stop water from dripping onto the floor

• For safety, unplug the appliance and shut off water supply (if applicable) before installing
• Slide or snap the tray into the designated location; ensure it seats fully and aligns with the drain path
• Inspect surrounding seals and drain channels for blockages or damage while the tray is accessible

This is a replacement screw used to secure appliance panels, trim, and small components so damaged or missing fasteners don't leave parts loose. It restores proper fit and reduces rattling and movement. What it does:

• Secures panels, trim pieces, or internal components to restore proper fit
• Stops panels from shifting or vibrating during use
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Helps eliminate rattling noises caused by loose fasteners

• One replacement screw as pictured

• Unplug the appliance or shut off power before installing
• Use the correct screwdriver or bit to avoid stripping the head
• Hand-start the screw, then snug—do not overtighten to avoid cracking plastic parts
• If screw threads are damaged, replace with the exact OEM screw to ensure proper fit