Lfxc 24726S/02 Parts

This decorative cap is a snap-on trim piece that restores the finished look of the refrigerator door by covering exposed screws or hinge hardware. It replaces missing or damaged caps to improve appearance and prevent dirt buildup. What it does:

• Covers exposed screws, hinge tops, or trim openings for a clean, factory-finish look
• Protects fasteners from dust and grime that can collect around door edges
• Helps hide cosmetic damage from chips or cracks in the door trim
• Commonly replaced when the cap is cracked, broken, or missing

• Typically snaps into place—remove old cap by prying gently with a plastic trim tool or flat screwdriver covered with tape
• Align and press the cap firmly until it clicks into position
• No electrical disconnection usually required, but unplug appliance if working near electrical components or interior lights
• Wear gloves to protect hands from sharp edges during removal/installation

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This is a replacement filter cover that secures and protects the air filter on compatible LG air-care units. It restores proper filter fit and helps maintain airflow and filtration performance for safer, cleaner operation. What it does:

• Holds the air filter in place and protects it from damage and debris
• Helps maintain correct airflow through the filter assembly
• Prevents gaps that can allow unfiltered air to bypass the filter
• Addresses symptoms such as a cracked, loose, warped, or missing filter cover

• One filter cover (housing) as shown

• Disconnect and unplug the appliance before servicing
• Remove the filter and detach the old cover (typically snaps or screws) before installing the replacement
• Align tabs and secure the cover until it seats firmly; do not force or bend mounting tabs
• If screws are used, tighten evenly to avoid distorting the cover; test fitment before powering on

This hinge cover protects and conceals the appliance door hinge, keeping the hinge area clean and improving the door's finished appearance. It helps prevent debris buildup and keeps moving parts shielded from accidental contact. What it does:

• Covers the door hinge to protect pivot components from dust and grime
• Helps maintain a neat, factory-finish look around the hinge area
• Reduces risk of snagging or accidental contact with the hinge
• Compatible replacement for worn, cracked, or missing hinge trim

• One hinge cover

• Remove power and open the door per your appliance's safety instructions before servicing
• Installation typically requires removing a few screws or clips; retain fasteners from the original cover if possible
• Use common hand tools and avoid forcing plastic tabs to prevent breakage

This lamp cover is the replacement light lens that protects and diffuses the appliance's internal lamp, restoring even illumination and shielding the bulb from moisture and debris. It's a direct-fit exterior lens for the lamp assembly. What it does:

• Protects the interior lamp from dust, moisture and impact to help prevent bulb damage
• Diffuses and directs light for even illumination inside the compartment
• Restores a cracked, yellowed or missing lens to improve visibility
• Helps maintain the lamp assembly's proper fit and alignment

• One lamp cover / light lens

• Power off and unplug the appliance before beginning any service
• Remove lamp bulb per manufacturer instructions before replacing the cover to avoid damage
• Use proper tools and handle the lens gently to avoid scratching or cracking
• If mounting clips or screws are worn or missing, replace them separately

A decorative door trim handle that restores the look and grip of your appliance door. Replaces scratched, cracked or worn trim so the door looks finished and is easier to open. What it does

• Provides the exterior trim/handle piece used to open and close the appliance door.
• Restores a secure grip when original trim is cracked, broken or loose.
• Improves appearance by replacing scratched or dented decorative trim.
• Works with the factory mounting points for a direct-fit replacement.

• One decor handle (trim) piece as shown.

• Disconnect power (and water supply for refrigerators with water/ice) before starting.
• Remove any trim covers or screws holding the old handle; handle may snap or screw off depending on model.
• Align replacement trim to factory mounting points and secure with original fasteners.

This foam gasket is a flexible seal strip that restores an airtight seal around the refrigerator/freezer cabinet, helping prevent air leaks and reduce frost buildup. It replaces worn or compressed foam seals for improved temperature control. What it does

• Seals gaps between cabinet surfaces to help keep cold air in and warm air out.
• Helps reduce frost or ice build-up caused by air infiltration.
• Can improve cooling efficiency and help maintain consistent temperatures.
• Common symptom: visible gaps, compressed foam, or recurring frost near the seal area.
• Common symptom: higher-than-normal run times or uneven cooling near the door/frame.

• One foam gasket (seal strip) as shown.

• Disconnect power to the appliance before starting any repair.
• Remove any trim or liners required to access the old gasket; handle foam carefully to avoid tearing.
• Install by aligning the gasket in the seal channel and pressing evenly into place; secure per manufacturer guidance.
• If adhesive or fasteners are used, use only manufacturer-recommended materials and follow safety instructions.

This rail holder secures a slide/rail assembly so a shelf or drawer tracks smoothly and stays in place. It restores proper support and alignment for the rail to prevent sagging or detachment. What it does:

• Retains and supports the rail or slide so the drawer/shelf tracks correctly
• Prevents the rail from slipping out or disconnecting during use
• Restores stable operation when a mounting point is cracked or worn
• Common symptom: drawer or shelf falls, slips, feels loose, or rattles

• One rail holder

• Disconnect power and remove contents from the area before starting
• Installation may require basic tools (screwdriver); keep fasteners from the original part
• Handle nearby shelves, glass, and sharp edges carefully to avoid damage or injury

The Name Plate is an OEM part for LG refrigerators. It is the printed decorative plate used to label the model and serial numbers for individual refrigerator components and the refrigerator itself. This nameplate adheres or attaches to the visible exterior of the appliance for identification purposes. 

Causes of a bad nameplate include damage, aging, or removal of the original nameplate. Over time, nameplates can become faded, stained, cracked, or removable. 

Symptoms of a bad nameplate include:

• Missing or illegible model/serial numbers 
• Inability to accurately identify appliance components
• Substandard aesthetic appearance

This OEM LG replacement nameplate will allow you to correctly label your refrigerator should the original nameplate become damaged or unusable. This LG part is also compatible with Sears/Kenmore.

This shelf net is a replacement mesh shelf designed to support lightweight items and produce in your refrigerator while allowing airflow. It restores storage organization and prevents small items from falling through broken or stretched shelving. What it does:

• Replaces torn, stretched, or missing mesh shelving to restore a secure, breathable shelf surface
• Helps keep small containers and produce stable and contained on the shelf
• Maintains airflow across the shelf area to help even cooling
• Fits into existing shelf brackets or frame to replace the original netting

• Unplug or disconnect power and remove food and containers from the shelf area before installing
• Remove the old net by releasing any clips or fasteners, then position the new net into the shelf frame or brackets
• Install by snapping or fastening into place; avoid overstretching the mesh to prevent premature wear