Lfxc 24726S/02 Parts

This refrigerator water inlet valve assembly regulates water flow from your home supply into the appliance. It restores proper filling for the ice maker and/or water dispenser and helps address leaks or no-water conditions. What it does

• Opens and closes to control water entering the refrigerator when energized
• Routes water to the ice maker and/or dispenser, depending on model design
• Common failure symptoms: no water from dispenser, ice maker not filling or making ice, slow/weak dispensing, or leaking from the rear of the unit
• Electrical/valve faults can also cause continuous dripping or overfilling

• One water inlet valve assembly

• Unplug the refrigerator and shut off the water supply before servicing
• Place a towel or pan to catch residual water when disconnecting lines
• Move tubing and wire connectors over one at a time to the new valve to maintain correct orientation
• After installation, restore water and power, then check all connections for leaks and verify proper operation

The Motor Assembly,dc is an OEM part for LG refrigerators. This fan motor assembly is responsible for circulating air within the fresh food compartment, ensuring proper cooling and temperature distribution. It provides the necessary airflow to keep your food items fresh and properly chilled.

Symptoms of a bad fan motor assembly include:

• Inadequate cooling in the fresh food compartment
• Unusual noises coming from the refrigerator
• Fan not spinning properly

A bad fan motor assembly can occur due to electrical issues, wear and tear, or other internal malfunctions. If you notice symptoms such as inadequate cooling in the fresh food compartment, unusual noises coming from the refrigerator, or the fan not spinning properly, it may be time to replace the fan motor assembly.

This LG replacement part is also compatible with Sears/Kenmore refrigerators.
 

This ice bucket assembly is the removable storage bin that collects and holds cubed ice from the refrigerator ice maker, restoring clean, contained ice storage and proper pickup by the dispenser or scoop. What it does:

• Collects and stores cubed ice produced by the ice maker so ice is contained and ready for use
• Guides ice toward the dispenser/auger area for consistent pickup
• Common symptoms it addresses: cracked or warped bin, ice spilling or falling out, ice not accumulating in the bin
• Fits into the freezer ice maker area and works with the factory guides and ejector mechanism

• Disconnect power to the refrigerator before servicing to avoid injury or damage
• Remove existing bucket by sliding it out of the guides; handle plastic parts gently to avoid cracking
• Reinstall by seating the bucket into the guides until it clicks or seats securely; ice maker components align before restoring power
• After installation, cycle power or run a test ice-making cycle to ensure proper operation

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

Replacement DC motor assembly that powers the appliance's drum/rotational system to restore tumbling or spinning. Fits as the drivetrain motor used when the original motor is worn, noisy, or no longer turning. What it does:

• Drives the drum or spin mechanism so the appliance can tumble or spin clothes as intended.
• Restores normal rotation when a failing motor causes no-tumble, no-spin, intermittent stopping, or humming without movement.
• Can correct grinding, squealing, or burning-odor symptoms when traced to a failed drive motor.
• Works with the existing mounting hardware and electrical connector on compatible models.

• Disconnect power (unplug or switch off breaker) before removing or installing the motor.
• Handle electrical connectors and wiring carefully; note connector positions and routing before disassembly.
• Inspect belt, pulleys, and mounting points while the motor is accessible and replace damaged components as needed.

This tray cover protects the appliance tray from spills, debris and everyday wear while restoring a finished appearance. Replacing a damaged or missing cover helps contain messes and keeps internal tray areas accessible for service. What it does:

• Covers and protects the tray area from food, water and debris
• Restores a clean appearance and helps prevent buildup on underlying components
• Stops small spills from spreading into the tray cavity
• Commonly replaced when cracked, warped, broken or missing

• Disconnect power to the appliance before beginning any service
• Remove nearby parts or trays as needed to access the cover
• Do not force the cover; align tabs and fasteners to avoid damage

This ice bank door gasket is the flexible door seal that keeps the ice bin compartment closed to limit warm air and moisture intrusion. Replacing a worn or torn gasket restores a tighter seal and helps reduce frost buildup and ice clumping. What it does:

• Forms an airtight seal around the ice bank/ice bin door to help prevent warm air and moisture from entering the compartment
• Reduces frost buildup, ice clumping, and excessive condensation inside the ice bin area
• Helps stop water or drips that can occur when the door seal is cracked or deformed
• Restores even door contact for proper closing and retention of ice quality

• Disconnect power to the refrigerator and remove the ice bin and any loose items before beginning.
• Inspect the door mounting channel; clean residue and old adhesive so the new gasket seats fully.
• Press the gasket evenly into the door channel, aligning any tabs or locator features; avoid stretching the gasket excessively.
• Use only non-sharp tools to ease the gasket into place; if the model uses clips or adhesive, replace or reapply per the manufacturer's instructions.

The motor bracket assembly secures the motor inside your appliance, keeping it aligned and stable. Replacing a damaged bracket helps reduce vibration-related noise and prevents the motor from shifting or rubbing during operation.

• Securely supports and positions the motor within its housing
• Maintains proper alignment and clearance to prevent rubbing or scraping
• Helps reduce vibration and rattling noises from a loose or broken mount
• Replaces cracked, warped, or broken brackets that allow the motor to move

• Disconnect power to the appliance before servicing; wear cut-resistant gloves.
• Remove the necessary cover/panel to access the motor area.
• Transfer the motor and any cushions/grommets and screws from the old bracket to the new one.
• Ensure moving parts rotate freely and wiring is secured before reassembly.

This replacement door basket restores usable storage space on the refrigerator door, holding bottles, jars and small containers so food stays organized and easy to reach. Made to match the original fit and mounting points. What it does:

• Replaces a cracked, broken or chipped door basket that can no longer hold items securely
• Restores proper storage and keeps bottles and containers from shifting or falling
• Replaces missing or warped bins that prevent the door from sealing or organizing contents
• Compatible with factory mounting clips and shelf support locations

• Remove all food and loose items from the door before installing the new basket
• Most door baskets snap into place on molded supports; align tabs and press until secured
• Inspect mounting clips or supports for damage; replace clips if they are broken

This magnet-activated switch is a small sensor that tells the appliance when a door or lid is open or closed. Replacing a faulty switch restores proper lighting, door-ajar alerts, and safety interlocks for normal operation.

• Senses a nearby magnet to report door/lid open/closed status to the control
• Helps control interior lights, alarms, fans, and dispenser/ice interlocks on applicable units
• Failure symptoms can include lights staying on or off, false door-ajar beeps, or dispenser/ice disabled
• Common causes: moisture intrusion, damaged leads, or stuck internal contacts

• Disconnect power before servicing
• Access the switch at the door opening (behind trim/control housing or liner, location varies by model)
• Release locking tabs/fasteners, move wiring carefully, and install the new switch in the same orientation
• Restore power and verify operation by bringing a magnet near the switch to toggle

This drawer guide is the plastic slide that supports and guides a freezer or refrigerator drawer for smooth, stable opening and closing. It replaces a worn or broken guide to reduce sticking, sagging, and drawer misalignment. What it does:

• Supports the drawer on its track so the drawer opens and closes smoothly
• Keeps the drawer aligned to prevent binding, scraping, or uneven movement
• Restores proper engagement with the drawer slide to stop sagging or partial drops
• Helps reduce noise and wear caused by a damaged or missing guide

• Disconnect power or unplug the appliance before accessing interior components
• Remove the drawer and any contents or glass shelves first to avoid breakage
• Typically secures with simple clips or a few screws; do not force parts—line up tabs before seating
• If metal parts are bent or the mating slide is damaged, inspect both sides and replace as needed

This replacement drawer tray assembly restores a refrigerator's lower storage drawer so food stays organized and supported. Durable molded tray snaps into the drawer housing to replace cracked, warped, or missing trays. What it does:

• Supports and contains fresh foods in the refrigerator drawer for organized storage
• Replaces damaged, cracked, or warped trays that can cause unstable items or food contact with drawer floor
• Helps maintain smooth drawer seating and alignment when the tray is properly installed
• Fits into the drawer housing and works with the existing slide/track components

• Remove contents and fully empty the drawer before replacing the tray
• Lift the drawer from its tracks, then snap the tray into the housing or replace and re-seat the drawer
• Use care to avoid sharp edges; wear gloves if needed and disconnect power if accessing electrical components nearby
• Only use manufacturer's replacement parts

The Basket Assembly is an OEM component specifically designed for LG Door-in-Door refrigerators containing bottom-mounted crisper drawers. This integral assembly organizes stored items within the refrigerator doorway.

Symptoms of a bad basket assembly include:

• Cracked or broken perforated shelves  
• Detached mounting brackets failing to secure basket
• Warped contours no longer fitting base compartment
• Missing attachments inhibiting proper installation

Causes of failure involve stresses from repeated loading/unloading cycles, mineral buildup weakening plastic brackets over time, or impact damage compromising structural integrity.

Replace yours today with this genuine OEM LG assembly to maintain tidy organizational capacity. Precision slots provide adjustable shelf positioning optimized for produce, snacks, and beverages. Compatible across Samsung, Frigidaire, and GE models featuring removable door crisper baskets.