Lfxc 24726S/02 Parts

This hinge cover assembly replaces a worn or damaged lid hinge cover to restore a smooth, finished look and protect the hinge area from debris and pinching. It helps keep the hinge area sealed and reduces snagging on the lid edge. What it does:

• Covers and protects the lid hinge and pivot area from dirt and moisture
• Restores a clean appearance where a cracked or missing hinge cover was visible
• Helps prevent clothing or hands from catching on the exposed hinge
• Can reduce rubbing noise caused by contact with a damaged cover

• Basic removal of the lid or access panel may be required; follow for proper disassembly
• Use appropriate hand tools and keep small fasteners secure during reassembly
• Disconnect power (and water for washers) before starting work to avoid injury

This air filter assembly replaces the factory air cleaner in compatible refrigerators to help reduce odors and maintain fresher air inside the fresh food compartment. Designed as a direct-fit replacement when the original filter is worn or clogged. What it does:

• Captures and helps reduce common refrigerator odors for improved internal air quality
• Circulates cleaner-smelling air through the fresh food compartment when the appliance's air circulation runs
• Helps maintain a neutral-smelling environment around stored foods to reduce flavor transfer
• For use when original filter is damaged, heavily soiled, or no longer performing

• One air filter assembly

• Check your owner's manual for the exact filter location and any appliance-specific steps before starting
• Replace with the power off or follow manufacturer guidance for safe access to the filter area
• Dispose of the old filter according to local regulations; avoid forcing parts during removal or installation

The HARNESS ASSEMBLY is an OEM part for LG refrigerators. It is a collection of wires bundled together into a single integrated unit, electrically connecting major fridge components like lights, temperature controls, and more. A properly functioning harness is vital for signal transmission throughout the appliance.

Causes of a bad harness assembly can include wear-and-tear damage from repeated door openings, exposed wires snagging on other parts, or potential water damage degrading insulation qualities over time. 

Symptoms of a bad harness assembly include:

• Lights, temperature controls, or other features failing to work properly  
• Intermittent or unreliable operation of connected components
• Loose or disconnected wires that may cause electrical issues
• Error codes related to sensor or control board failures

This part is also compatible with Sears/Kenmore models.

This display power control board assembly powers and controls the appliance's front-panel display and touch/selector interface, restoring visual feedback and button responsiveness for the user control area. What it does:

• Supplies power and control signals to the front-panel display and LEDs
• Interprets button/touch inputs and relays commands to the main control board
• Common symptom: blank, dim, or flickering display
• Common symptom: unresponsive or intermittent front-panel buttons or touch controls
• Can help resolve display-related errors when diagnostics point to the UI board

• Disconnect power to the appliance before starting any work to avoid shock or damage.
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available.
• Remove the control panel to access and carefully unplug ribbon cables and connectors; note connector locations for reassembly.
• Only replace if diagnostics indicate the UI/display board.

This Door Basket is a replacement door-mounted storage basket that restores inside-door storage and helps keep items organized and accessible. It fits the original door mounting points to return usable shelf space. What it does:

• Provides a rigid storage shelf mounted to the appliance door for bottles, jars, and small containers
• Restores lost or damaged door storage to improve organization and access
• Replaces cracked, broken, or missing door basket that causes items to fall or shift
• Matches original mounting locations for a secure fit when installed correctly

• 1 door basket

• Remove power to the appliance and empty the door before starting work
• Align with existing door mounting clips or screws and secure using the original hardware
• Inspect surrounding door trim and seals for damage during installation

This door stopper replaces the small hinge stop that limits door swing and helps the door close and latch properly. It restores correct door alignment and prevents the door from swinging past its intended range. What it does:

• Acts as a mechanical stop on the door hinge to control opening angle and reduce stress on the hinge
• Helps the door close smoothly and remain properly aligned
• Commonly replaces a cracked, worn, or missing stopper that allows over-rotation or uneven closing
• Can reduce noise and wear caused by a loose or shifting door

• Disconnect power to the appliance before servicing to avoid injury
• Replace like-for-like; removal may require removing the hinge trim or screws—keep fasteners organized
• Inspect adjacent hinge components and seals for wear while the door is removed

This button assembly replaces a damaged or unresponsive control-panel button cluster to restore reliable button operation and user control. It fits into the appliance's front control panel and connects to the main control board. What it does:

• Replaces cracked, worn, or missing control-panel buttons
• Restores button responsiveness and reliable input to the control board
• Helps resolve symptoms like sticking, intermittent, or non-working buttons
• Maintains the original panel layout and tactile feedback

• Disconnect power (unplug appliance or switch off breaker) before beginning
• Access may require removing the control-panel trim or console—keep fasteners organized
• Handle the assembly carefully to avoid damage to the button contacts or wiring
• Test button function before reassembling the entire console

Note: Right Rail Cap 

This Tray Cover Assembly replaces a damaged or missing tray cover to restore a finished appearance and proper protection for the underlying tray area. Designed to fit and align with the original mounting points for a secure fit. What it does:

• Covers and protects the appliance tray from spills, debris, and everyday wear
• Helps maintain correct spacing and alignment of tray components
• Restores the original look where the tray cover is cracked, warped, or broken
• Stops light drafts or minor leaks by resealing the tray perimeter (when part is intact)

• One tray cover assembly

• Install with appliance powered off and water/ice supply turned off if working near dispenser or ice components
• Align tabs and mounting points, then press or fasten according to original hardware—do not force parts into place
• Inspect surrounding clips and screws; replace damaged fasteners to ensure a secure fit

This Tray Cover Assembly replaces a damaged or missing cover on the appliance tray to help contain contents and keep the tray functioning correctly. It restores the tray's protective surface and helps prevent spills or contamination. What it does:

• Covers and protects the tray surface to keep contents contained
• Helps direct contents into the tray area to reduce spills
• Replaces cracked, warped or broken covers that no longer seat properly
• Restores a flush fit and appearance for the tray area

• One tray cover assembly

• Disconnect power to the appliance before beginning any service
• Remove the tray or access panel per your model's service instructions to access mounting points
• This part typically snaps or slides into place; light tools (screwdriver) may be needed to remove retaining clips

This door foam assembly replaces the insulation inside a refrigerator door to help restore proper temperature retention and reduce condensation. It fits into the door liner to replace damaged or missing foam for improved cooling performance. What it does:

• Replaces deteriorated or compressed door insulation to help maintain consistent cabinet temperature
• Reduces interior condensation and frost buildup caused by broken or missing door foam
• Improves energy efficiency by restoring the door's thermal barrier
• Helps eliminate cold spots on the door that can affect stored items

• One door foam assembly

• Unplug the appliance before beginning any repairs.
• Installation typically requires removing the door liner or inner panel; keep track of fasteners and clips.
• Handle edges and clips carefully to avoid damage to the liner or gasket; use appropriate trim tools.
• If adhesive or sealant is present, carefully remove old material and clean surfaces before installing the new foam.

This center hinge assembly replaces the middle door hinge on compatible French-door refrigerators to restore proper door alignment and smooth opening. It helps prevent sagging, binding, and air leaks caused by a worn or damaged hinge. What it does:

• Supports and aligns the upper/lower refrigerator doors for correct sealing
• Enables smooth pivoting of the door to open and close without binding
• Corrects uneven gaps or door sag that can cause cooling loss or excessive wear
• Replaces a bent, cracked, or worn hinge that may cause noisy operation

• One center hinge assembly

• Remove power and empty the door(s) before beginning work; follow manufacturer service instructions
• Use proper tools and support the door while removing/installing the hinge to avoid injury or damage
• Inspect surrounding trim and fasteners; replace any worn screws or bushings as needed

This stopper assembly cushions and limits the door travel to prevent slamming and ensure correct door alignment. It restores smooth, controlled closing and helps reduce noise and wear on the door hinge area. What it does:

• Absorbs door impact to prevent hard slams and reduce noise
• Keeps the door from overtravel for consistent alignment
• Helps protect hinge and cabinet edges from damage
• Restores proper door closing feel when worn or broken

• One stopper assembly as shown

• Disconnect power and empty door area before starting repairs
• Access may require removing door trim or inner panel
• Use basic hand tools; avoid forcing the part into place to prevent damage

This DC motor assembly powers the appliance's indoor fan to move air where needed. Replacing a worn motor restores proper airflow and reduces noise, helping the appliance maintain performance and temperature control. What it does:

• Spins the indoor fan/blower to circulate air through the appliance
• Restores airflow when a motor has failed or stopped running
• Reduces whining, grinding, or irregular fan noise caused by a faulty motor
• Helps resolve uneven temperatures or poor circulation tied to a bad motor

• Disconnect power to the appliance before starting any repair
• Handle wiring connectors and mounting tabs carefully; match harness connections exactly
• Inspect and secure mounting screws and blower/fan alignment during reassembly
• Test operation after installation to ensure proper airflow and sound

This main PCB power control board assembly manages the appliance's electronic controls and power distribution so the unit responds correctly to user commands. Replacing a faulty board restores control panel operation and key functions. What it does:

• Regulates power and communication between the control panel and internal components
• Handles user input signals and runs control sequences for normal operation
• Can correct symptoms like unresponsive controls, failure to start, or intermittent operation when the board is faulty
• Works as the central control module for timed cycles and safety interlocks

• One main PCB power control board assembly

• Disconnect power at the breaker or unplug the appliance before starting any repair
• Handle the PCB by its edges and avoid touching components to prevent ESD damage
• Verify connector orientation and seating; ensure all ribbon cables and harnesses are fully engaged