Lfxc24726d Parts

This slide rail guides and supports a single appliance drawer or pull-out door so it opens and closes smoothly and stays aligned. Replaces a worn, bent, or noisy guide to restore proper movement and stability. What it does:

• Provides a rolling/sliding track for a drawer or pull-out door to travel smoothly
• Replaces damaged or worn rail that causes sticking, misalignment, or uneven movement
• Helps keep the drawer properly supported and prevents sagging or binding
• Works as a direct-fit replacement when the original rail is broken or worn

• One slide rail (single left or right guide)

• Disconnect power and empty the drawer before starting repairs
• Typical installation requires removing the drawer and fastening the rail with existing screws or clips
• Inspect mating hardware and replace any stripped screws or broken clips for secure fit

This duct assembly routes exhaust air from the dryer and provides adjustable airflow direction for proper venting. It restores correct airflow and helps reduce excess lint buildup and drying times when the original duct is damaged or misaligned. What it does:

• Channels dryer exhaust to the external vent to maintain safe, efficient operation
• Features an adjustable/multi-directional outlet for flexible vent routing in tight spaces
• Helps reduce vent restrictions that can cause longer dry cycles or overheating
• Supports proper lint evacuation to lower the risk of lint accumulation near the cabinet

• One duct assembly

• Designed for use with compatible dryer models; verify fit before installation
• Disconnect power and gas (if applicable) and unplug the appliance before servicing
• Use basic hand tools; avoid crushing or kinking the duct during installation
• If venting to the exterior, confirm duct routing and seals are secure to prevent leaks

This LED light cover protects and diffuses the appliance's interior LED, restoring even lighting and a finished appearance. It is a direct-fit replacement designed to match the original factory lens. What it does:

• Protects the LED assembly from debris and impacts
• Diffuses and softens LED output for even interior illumination
• Restores a cracked, yellowed, or missing lens that affects light distribution
• Helps prevent direct contact with the LED board

• One LED light cover

• Disconnect power or unplug the appliance before starting
• Handle the lens carefully to avoid scratches; it typically snaps into place or is retained by a few clips
• Use a small screwdriver only if necessary to release retaining clips; avoid forcing parts

This ferrite magnet is a replacement magnetic element used in compatible appliance assemblies to help secure components and maintain proper alignment. It restores magnetic retention and reduces shifting or misalignment during operation. What it does:

• Provides magnetic retention for panels, assemblies or components that rely on ferrite magnets
• Helps maintain proper alignment and secure closure where magnets are used
• Can reduce noise and vibration related to loose magnetic components
• Useful when a brittle, cracked or weak magnet no longer holds parts in place

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Handle the magnet carefully; ferrite material is brittle and can chip or shatter if dropped or struck
• Keep magnets away from sensitive electronics and credit cards; avoid pinching fingers between strong magnets
• If the original magnet is bonded or embedded, some adhesive or light trim may be needed for proper fit.

The Gasket Assembly Door is an OEM part for LG refrigerators. This gasket forms a seal around the refrigerator door, preventing warm air from entering and cool air from escaping, thus maintaining optimal temperature inside the refrigerator.

Causes of a bad gasket assembly can include wear and tear over time, damage from frequent opening and closing of the door, or degradation from exposure to various elements. A compromised gasket can lead to inefficiency in the refrigerator's cooling performance.

Symptoms of a bad gasket assembly include:

• Warm air entering the refrigerator
• Increased energy consumption
• Frost buildup inside the refrigerator
• The door not sealing properly or being difficult to close

This OEM LG part is also compatible with Sears/Kenmore models.

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The Water Valve Assembly is an OEM part for LG refrigerators. It controls the flow of water into the refrigerator's ice maker and water dispenser, ensuring a steady and controlled supply. This valve opens and closes in response to electrical signals from the refrigerator, allowing water to enter the appropriate compartments for ice making and dispensing.

Over time, the water valve can wear out or become damaged due to mineral deposits, wear and tear, or electrical issues. A malfunctioning water valve can lead to problems such as water not dispensing correctly or the ice maker not producing ice.

Symptoms of a bad water valve assembly include:

• No water dispensing from the refrigerator
• Ice maker not producing ice
• Leaking water from the valve area
• Unusual noises coming from the valve

This OEM LG part is also compatible with Sears/Kenmore.

This rail guide assembly provides the sliding track that supports a pull-out refrigerator drawer. Replacing a worn or bent rail restores smooth operation and proper alignment so the drawer opens and closes without sticking.

• Supports the drawer and provides a smooth sliding path
• Keeps the drawer level and aligned during travel
• Helps ensure full extension and proper closure
• Replaces rails that are bent, cracked, or have worn internal components
• Common symptoms include sticking, uneven movement, grinding/popping noises, or the drawer not closing flush

• Unplug the refrigerator and remove items from the affected drawer
• Remove the drawer/basket and door front per your model's instructions to access the rail
• Retain and reuse mounting screws and any brackets or end stops; transfer to the new rail if needed
• Install the new rail, ensure both sides are parallel and level, then test drawer travel before reloading

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

This drain tube assembly channels defrost water from the evaporator to the drain pan, preventing leaks and water buildup. Replace a cracked or clogged tube to restore proper drainage and reduce puddles or ice inside your refrigerator.

• Directs defrost water from the drain outlet to the drain pan
• Helps prevent water leaks inside the fresh food or freezer compartment
• Addresses issues from a tube that is cracked, kinked, or obstructed by debris/ice
• Common symptoms: water under crisper drawers, puddles beneath the unit, or ice forming at the freezer bottom

• Unplug the refrigerator before servicing
• Access the drain outlet and remove any ice or debris from the drain path
• Fully seat the tube at both ends to ensure a secure, leak-free fit
• Test by pouring a small amount of warm water into the drain to confirm proper flow to the pan

Rail Guide Assembly keeps a dishwasher or appliance drawer/rack aligned and sliding smoothly, restoring proper movement and preventing jams or sagging when the original guide is worn or broken. What it does:

• Guides and supports the drawer or rack along its track for smooth, even travel.
• Replaces cracked, worn, or bent guides that cause sticking, rough movement, or drooping.
• Helps restore proper alignment so the drawer/rack opens and closes without binding.
• Prevents further wear to adjacent rollers or tracks by restoring correct motion.

• Disconnect power (and water if applicable) before starting any repair.
• Remove the drawer/rack and any obstructing parts to access the guide; keep fasteners organized.
• Basic hand tools (screwdriver, nut driver) are typically required; align tabs/slots before securing.

This rail guide assembly supports and guides a refrigerator drawer along its slide track. Replacing a worn rail restores smooth, even movement and helps the drawer close properly without binding or coming off track.

• Guides the drawer along the slide path for smooth opening and closing
• Maintains alignment to keep the drawer level and stable
• Common symptoms of failure: sticking, rough or noisy travel, tilting, coming off track, or not closing fully
• Damage or wear to the rail can prevent proper drawer operation

• Disconnect power and remove drawer contents before servicing
• Pull out and remove the drawer/basket to access the rail
• Unfasten and remove the old rail; retain and transfer any mounting hardware or clips if needed
• Secure the new rail and test drawer travel for smooth, even operation

Restore the interior of your refrigerator with this T/V cover assembly. It covers the temperature-variable (T/V) section and helps direct airflow in the fresh food compartment, protecting components and maintaining a clean, finished appearance for consistent performance.

• Covers and protects the T/V section/duct inside the fresh food compartment
• Helps guide airflow to the T/V area as designed by the manufacturer
• Replaces cracked, warped, or missing panels to restore proper fit and function
• Common signs to replace: broken tabs, loose or rattling panel, uneven cooling around the T/V area

• Disconnect power before servicing
• Clear the shelf area and remove adjacent drawers or trim as needed
• Release retaining screws or clips and lift out the old cover carefully
• Seat the new cover evenly on its supports; ensure vents/slots align and the panel locks into place before restoring power