Lfxc24726s /02 Parts

Door switch magnet for reed switch

This small retaining clip secures its mating component within the refrigerator assembly, keeping parts properly seated and reducing vibration. Replacing a damaged or missing clip helps restore a snug fit and reliable operation of the attached piece.

• Holds the designated part firmly in place within the assembly
• Maintains proper alignment to prevent movement or rattling
• Helps ensure panels, ducts, or lines stay secured during use
• Symptoms can include loose or sagging parts, vibration noises, or components that won't stay attached

• Disconnect power; if working near the water system, also shut off the water supply
• Note the original orientation and placement before removal
• Fully seat the mating component, then press the new clip into place without forcing
• Check operation before reassembly

This stopper assembly mounts on the appliance door to cushion movement and hold the door in position, reducing wear and preventing slamming for smoother, safer operation. Fits as the OEM door stop used on compatible LG models. What it does:

• Cushions door movement to prevent hard impacts and reduce noise
• Holds the door in the open or closed position to prevent unwanted swings
• Helps maintain door alignment and reduces stress on hinges and latches
• Common symptom: door slams, won't stay open, or bangs against the cabinet

• Disconnect power and water before starting any repair
• Remove the door or open access for safe replacement
• Replacement typically requires basic hand tools (screwdriver or nut driver)
• Inspect surrounding hinge/fastener hardware and replace if worn

This LED assembly restores backlight illumination for compatible LG displays, improving screen brightness and uniformity so images look clearer and easier to see. It replaces a worn or failed backlight strip. What it does:

• Provides the backlight illumination that lights the LCD panel
• Restores overall brightness and reduces dark or dim areas
• Can stop flickering or intermittent light if LEDs are failing
• Helps eliminate uneven lighting or bright/dark bands across the screen

• One LED assembly (single backlight strip) as shown

• Disconnect power and allow capacitors to discharge before starting
• Handle the LED strip and circuit board by the edges; avoid touching LED surfaces and PCB traces
• Keep track of screws and clips; test the display before fully reassembling

This cover cap is a small plastic trim piece that protects exposed fasteners and improves the appliance's appearance. It snaps into place to hide mounting posts and help prevent snags or debris buildup. What it does:

• Covers and protects exposed screws, posts, or fasteners for a finished look
• Prevents lint, dust, and debris from collecting around the mounting point
• Reduces the chance of fabric snags or contact with sharp edges
• Restores worn or missing trim for improved cosmetics

• Disconnect power to the appliance before starting any service that exposes electrical components
• Usually installs by snapping over the post or press-fitting into the trim opening — no special tools required
• If needed, remove adjacent trim pieces to gain access, then reinstall trim in reverse order
• Inspect surrounding mounting hardware for damage and replace if necessary

Note: Left Rail Cap

This lower hinge assembly secures and supports the refrigerator door pivot, restoring proper door alignment and smooth opening/closing. Replace a worn or damaged lower hinge to stop sagging, help seal performance, and reduce rubbing or binding. What it does:

• Provides a stable pivot point for the lower side of the refrigerator door.
• Corrects door sagging or misalignment that can cause poor sealing or uneven gaps.
• Reduces rubbing, scraping, or binding when opening and closing the door.
• Restores proper door operation after impact damage or worn hinge components.

• One lower hinge assembly

• Disconnect power and remove food from the door area before starting; support the door to prevent dropping during removal.
• Keep all original fasteners if they are undamaged; some models may reuse screws or pins.
• Use appropriate tools and take care not to damage the door finish or gasket; wear gloves to protect hands.

The Motor Assembly,dc is an OEM part for LG refrigerators. This fan motor assembly is responsible for circulating air within the fresh food compartment, ensuring proper cooling and temperature distribution. It provides the necessary airflow to keep your food items fresh and properly chilled.

Symptoms of a bad fan motor assembly include:

• Inadequate cooling in the fresh food compartment
• Unusual noises coming from the refrigerator
• Fan not spinning properly

A bad fan motor assembly can occur due to electrical issues, wear and tear, or other internal malfunctions. If you notice symptoms such as inadequate cooling in the fresh food compartment, unusual noises coming from the refrigerator, or the fan not spinning properly, it may be time to replace the fan motor assembly.

This LG replacement part is also compatible with Sears/Kenmore refrigerators.
 

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

This drawer guide is the plastic slide that supports and guides a freezer or refrigerator drawer for smooth, stable opening and closing. It replaces a worn or broken guide to reduce sticking, sagging, and drawer misalignment. What it does:

• Supports the drawer on its track so the drawer opens and closes smoothly
• Keeps the drawer aligned to prevent binding, scraping, or uneven movement
• Restores proper engagement with the drawer slide to stop sagging or partial drops
• Helps reduce noise and wear caused by a damaged or missing guide

• Disconnect power or unplug the appliance before accessing interior components
• Remove the drawer and any contents or glass shelves first to avoid breakage
• Typically secures with simple clips or a few screws; do not force parts—line up tabs before seating
• If metal parts are bent or the mating slide is damaged, inspect both sides and replace as needed

This replacement drawer tray assembly restores a refrigerator's lower storage drawer so food stays organized and supported. Durable molded tray snaps into the drawer housing to replace cracked, warped, or missing trays. What it does:

• Supports and contains fresh foods in the refrigerator drawer for organized storage
• Replaces damaged, cracked, or warped trays that can cause unstable items or food contact with drawer floor
• Helps maintain smooth drawer seating and alignment when the tray is properly installed
• Fits into the drawer housing and works with the existing slide/track components

• Remove contents and fully empty the drawer before replacing the tray
• Lift the drawer from its tracks, then snap the tray into the housing or replace and re-seat the drawer
• Use care to avoid sharp edges; wear gloves if needed and disconnect power if accessing electrical components nearby
• Only use manufacturer's replacement parts

This air filter assembly replaces the factory air cleaner in compatible refrigerators to help reduce odors and maintain fresher air inside the fresh food compartment. Designed as a direct-fit replacement when the original filter is worn or clogged. What it does:

• Captures and helps reduce common refrigerator odors for improved internal air quality
• Circulates cleaner-smelling air through the fresh food compartment when the appliance's air circulation runs
• Helps maintain a neutral-smelling environment around stored foods to reduce flavor transfer
• For use when original filter is damaged, heavily soiled, or no longer performing

• One air filter assembly

• Check your owner's manual for the exact filter location and any appliance-specific steps before starting
• Replace with the power off or follow manufacturer guidance for safe access to the filter area
• Dispose of the old filter according to local regulations; avoid forcing parts during removal or installation